Cam elyaf/talk hibridizasyon oranının polipropilen kompozitlerin viskoelastik, termal ve morfolojik özellikleri üzerindeki etkisi

Öz

Bu çalışmada, kısa cam elyaf (GF) ve partikül talk kullanılarak yapılan hibrit takviyenin, polipropilen (PP) kompozitlerin viskoelastik, termal ve mikroyapısal özellikleri üzerindeki etkileri incelenmiştir. Hibrit kompozitler, %40 ağırlıkça GF takviyeli PP ve %40 ağırlıkça talk dolgulu PP'nin çeşitli ağırlık oranlarında (100/0, 0/100, 25/75, 50/50 ve 75/25) eritilerek birleştirilmesi yoluyla üretilmiştir. Dinamik Mekanik Analiz (DMA), tamamen GF takviyeli sistemdeki sürekli lifli ağın nispeten daha yüksek depolama modülü değerleri (~4100 MPa) sergilediğini ortaya koyarken, talk ilavesinin viskoz dağılımın azalmasıyla daha dengeli bir sertlik davranışına katkıda bulunduğu görülmüştür. Termogravimetrik Analiz (TGA), talk bakımından zengin hibrit formülasyonun (%25 GF / %75 Talk) ilk termal bozunmanın başlangıcını (T5%) geciktirdiğini göstermiştir; bu durum, uçucu difüzyona karşı talk partiküllerinin bariyer etkisiyle ilişkili olabilir. Ayrıca, Diferansiyel Taramalı Kalorimetri (DSC) analizi, dengeli hibrit formülasyonun (%50 GF / %50 Talk) incelenen sistemler arasında en yüksek kristallik derecesini sergilediğini göstermiştir; bu, tek dolgu maddeli talk kompozitine kıyasla yaklaşık %67'lik bir artışa karşılık gelmektedir. Taramalı Elektron Mikroskobu (SEM) gözlemleri, dengeli hibrit yapıda nispeten daha homojen bir morfoloji, nispeten tekdüze dolgu maddesi-matris morfolojisi ve azalmış görünür boşluk oluşumu ortaya koyarak termomekanik bulguları desteklemiştir. Genel olarak, sonuçlar sistematik GF/talk hibridizasyonunun, mühendislik uygulamaları için ticari olarak bileştirilmiş PP kompozitlerin termomekanik performans dengesini ayarlamak için etkili bir strateji sağladığını göstermektedir.

Anahtar Kelimeler

• Polipropilen
• Hibrit kompozitler
• Cam elyafı
• Talk
• Viskoelastik özellikler
• Termal analiz

Destekleyen Kurum

Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (TÜBİTAK)

Proje Numarası

1919B012419735

Teşekkür

Bu çalışma, Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (TÜBİTAK) tarafından 2024/1 dönemi 2209-A - Üniversite Öğrencileri Araştırma Projeleri Destekleme Programı kapsamında desteklenmiştir (Proje Numarası: 1919B012419735). Katkılarından dolayı TÜBİTAK'a teşekkürlerimizi sunarız.

Effect of glass fiber/talc hybridization ratio on the viscoelastic, thermal, and morphological properties of polypropylene composites

Öz

This study investigates the effects of systematically redistributing a constant nominal reinforcement content of 40 wt% between short glass fibers (GF) and particulate talc on the viscoelastic, thermal, crystallization, and morphological properties of polypropylene (PP) composites. Commercial PP compounds containing 40 wt% GF (GF40) and 40 wt% talc (TF40) were melt-blended at GF40/TF40 ratios of 100/0, 0/100, 25/75, 75/25, and 50/50, while maintaining an approximately constant PP matrix content of 60 wt%. Dynamic Mechanical Analysis showed that the GF-only formulation exhibited the highest storage modulus, approximately 4100 MPa, whereas increasing talc content generally reduced viscous energy dissipation. Thermogravimetric Analysis indicated that the talc-rich C2 and C3 formulations exhibited closely comparable delayed degradation onset. C3 showed the highest measured T_(5%)and T_(10%)values of 437.02 and 447.25 ℃, respectively, while C2 exhibited corresponding values of 435.35 and 446.55 ℃, indicating a formulation-dependent response rather than a simple monotonic talc barrier effect. Differential Scanning Calorimetry showed that C1 and the GF-dominant hybrid C4 exhibited the highest and nearly comparable PP matrix crystallinity values of 43.3% and 43.0%, respectively. Scanning Electron Microscopy observations revealed formulation-dependent fracture-surface features, including exposed fibers, particle-rich regions, and localized voids. Overall, the results demonstrate that redistributing a constant reinforcement content between GF and talc provides a practical approach for tailoring stiffness, energy dissipation, degradation behavior, and crystallization performance in commercially compounded PP systems.

Anahtar Kelimeler

• Polypropylene
• Hybrid composites
• Glass fiber
• Talc
• Viscoelastic properties
• Thermal analysis

Destekleyen Kurum

The Scientific and Technological Research Council of Turkey (TÜBİTAK)

Proje Numarası

1919B012419735

Teşekkür

This study was supported by the Scientific and Technological Research Council of Turkey (TÜBİTAK) under the 2024/1 cycle of the 2209-A - Research Project Support Program for University Students (Project Number: 1919B012419735). We would like to express our gratitude to TÜBİTAK for their support.

Kaynakça

1. [1] A. Çelik and Y. Arman, “Effect of fiber orientation and loading direction on the compressive response of E-glass/epoxy laminated composites used in modern helicopter blades submitted to high strain rate,” Dicle Univ. J. Eng., vol. 13, no. 4, pp. 693–700, 2023, doi: 10.24012/dumf.1140112.
2. [2] M. Öncül, M. Atagür, E. Atan, and K. Sever, “A preliminary evaluation of Bing cherry tree (Prunus avium L.) pruning waste as an alternative lignocellulosic filler for lightweight composite material applications,” Polym. Compos., vol. 46, no. 4, pp. 3655–3667, 2025, doi: 10.1002/pc.29197.
3. [3] S. Yalçinkaya, M. F. Yoldaş, and D. Mertgenç Yoldaş, “Experimental investigation of four-point bending test results of GFRP and CFRP composites used in wind turbine blades,” Polymers, vol. 17, no. 17, 2025, Art. no. 2412, doi: 10.3390/polym17172412.
4. [4] D. C. Karasulu, M. Öncül, O. Özcan, and M. Sütçü, “Performance evaluation of lignocellulosic fiber-reinforced brake pads using hybrid optimization techniques,” Polym. Compos., vol. 47, no. 8, pp. 7657–7674, 2026, doi: 10.1002/pc.70648.
5. [5] M. Öncül, “Experimental–numerical framework for evaluating the mechanical response of Cornus sanguinea L.-reinforced polypropylene biocomposites,” Polymers, vol. 18, no. 9, 2026, Art. no. 1020, doi: 10.3390/polym18091020.
6. [6] İ. Kartal, M. Mudu, K. Büyükkaya, and H. Demirer, “Investigation of wear properties of elastomer modified wollastonite and hazelnut shell flour reinforced polypropylene composites,” J. Innov. Eng. Nat. Sci., vol. 5, no. 1, pp. 70–79, 2025, doi: 10.61112/jiens.1456884.
7. [7] B. Arı, A. Yüksel, and A. Bedeloğlu, “Yüksek darbe dayanımlı aramid/cam elyaf takviyeli hibrit kompozitlerin mekanik performanslarının incelenmesi,” J. Innov. Eng. Nat. Sci., vol. 6, no. 1, pp. 51–62, 2026, doi: 10.61112/jiens.1689069.
8. [8] M. Savran, M. Yılmaz, M. Öncül, and K. Sever, “Manufacturing and modeling of polypropylene-based hybrid composites by using multiple-nonlinear regression analysis,” Sci. Res. Commun., vol. 2, no. 1, pp. 1–15, 2022, doi: 10.52460/src.2022.002.

9. [9] M. T. Hossain et al., “Research and application of polypropylene: A review,” Discover Nano, vol. 19, no. 1, 2024, Art. no. 2, doi: 10.1186/s11671-023-03952-z.
10. [10] Q. T. H. Shubhra, A. K. M. M. Alam, and M. A. Quaiyyum, “Mechanical properties of polypropylene composites: A review,” J. Thermoplast. Compos. Mater., vol. 26, no. 3, pp. 362–391, 2013, doi: 10.1177/0892705711428659.
11. [11] A. Kufel, S. Para, and S. Kuciel, “Basalt/glass fiber polypropylene hybrid composites: Mechanical properties at different temperatures and under cyclic loading and micromechanical modelling,” Materials, vol. 14, no. 19, 2021, Art. no. 5574, doi: 10.3390/ma14195574.
12. [12] S. Lou, W. Yin, X. Ma, J. Yuan, and Q. Wang, “Mechanical properties and fracture mechanism of a glass fiber reinforced polypropylene composites,” J. Wuhan Univ. Technol.-Mater. Sci. Ed., vol. 35, no. 3, pp. 629–634, 2020, doi: 10.1007/s11595-020-2300-y.
13. [13] A. Iadarola et al., “Shear behavior and modeling of short glass fiber- and talc-filled recycled polypropylene composites at different operating temperatures,” J. Compos. Sci., vol. 8, no. 9, 2024, Art. no. 345, doi: 10.3390/jcs8090345.
14. [14] Y. Wang, L. Pan, Z. Li, G. Yue, and J. Man, “Study on static and dynamic mechanical properties of glass fiber reinforced polypropylene laminated self-reinforced polypropylene composite structure,” Compos. Struct., vol. 314, 2023, Art. no. 116978, doi: 10.1016/j.compstruct.2023.116978.
15. [15] M. Barczewski et al., “Thermo-mechanical and mechanical behavior of hybrid isotactic polypropylene glass fiber reinforced composites modified with calcium carbonate (CaCO₃),” Polym. Eng. Sci., vol. 60, no. 7, pp. 1588–1603, 2020, doi: 10.1002/pen.25404.
16. [16] H. K. Moussa, G. Challita, W. Yared, M. Abi Rizk, H. Badreddine, and A. Alhussein, “Development of glass fiber/talc-filled polypropylene composites for use in multilayer sewage pipes application,” in Proc. 20th Eur. Conf. Compos. Mater. (ECCM20), Lausanne, Switzerland, Jun. 26–30, 2022, pp. 129–135.
17. [17] C. Tsioptsias, K. Leontiadis, X. Ntampou, and I. Tsivintzelis, “Modification of talc and mechanical properties of polypropylene-modified talc composite drawn fibers,” J. Compos. Sci., vol. 8, no. 3, 2024, Art. no. 91, doi: 10.3390/jcs8030091.
18. [18] L. Altay, M. Sarikanat, M. Sağlam, T. Uysalman, and Y. Seki, “The effect of various mineral fillers on thermal, mechanical, and rheological properties of polypropylene,” Res. Eng. Struct. Mater., vol. 7, no. 3, pp. 361–373, 2021, doi: 10.17515/resm2021.258ma0213.
19. [19] M. Ferdinánd, R. Várdai, J. Móczó, and B. Pukánszky, “Reinforcement of PP with a hybrid nanofiller: Comparison to talc,” Polym. Test., vol. 117, 2023, Art. no. 107840, doi: 10.1016/j.polymertesting.2022.107840.
20. [20] K. Zhan, T. Elder, and Y. Peng, “Enhancing polypropylene/polyethylene blend performance through compatibilization for a sustainable future: A mini review focusing on establishing bio-derived filler-based hybrid compatibilizer system,” Macromol. Rapid Commun., vol. 46, no. 11, 2025, Art. no. e2400724, doi: 10.1002/marc.202400724.
21. [21] Y. Ryu, J. S. Sohn, B. C. Kweon, and S. W. Cha, “Shrinkage optimization in talc- and glass-fiber-reinforced polypropylene composites,” Materials, vol. 12, no. 5, 2019, Art. no. 764, doi: 10.3390/ma12050764.
22. [22] C. L. Morelli, A. S. Pouzada, and J. A. Sousa, “Influence of hybridization of glass fiber and talc on the mechanical performance of polypropylene composites,” J. Appl. Polym. Sci., vol. 114, no. 6, pp. 3592–3601, 2009, doi: 10.1002/app.30980.
23. [23] M. Öncül, “Influence of lignocellulosic fillers and interfaces on thermal and mechanical properties of biocomposites,” Ph.D. dissertation, Dept. Mech. Eng., İzmir Katip Çelebi Univ., İzmir, Türkiye, 2023.
24. [24] M. Savran, M. Öncül, M. Yılmaz, L. Aydın, and K. Sever, “Modeling and optimization of dynamic-mechanical properties of hybrid polymer composites by multiple nonlinear neuro-regression method,” Sigma J. Eng. Nat. Sci., vol. 41, no. 6, pp. 1243–1254, 2023.
25. [25] R. Banerjee and S. S. Ray, “Role of rheology in morphology development and advanced processing of thermoplastic polymer materials: A review,” ACS Omega, vol. 8, no. 31, pp. 27969–28001, 2023, doi: 10.1021/acsomega.3c03310.
26. [26] Y. Liu et al., “Enhanced mechanical properties, thermal behavior and foaming ability of PP-g-MAH modified PP/BF composites,” Polym. Compos., vol. 44, no. 9, pp. 6228–6241, 2023, doi: 10.1002/pc.27558.
27. [27] M. Sabbrojjaman, A. Manalo, W. Ferdous, and O. Alajarmeh, “Mechanical and durability characteristics of particulate-filled recycled thermoplastic composites (RTCs): A comprehensive review,” Polymers, vol. 17, no. 23, 2025, Art. no. 3161, doi: 10.3390/polym17233161.
28. [28] M. R. Islam, A. Gupta, M. Rivai, M. D. H. Beg, and M. F. Mina, “Effects of fiber-surface treatment on the properties of hybrid composites prepared from oil palm empty fruit bunch fibers, glass fibers, and recycled polypropylene,” J. Appl. Polym. Sci., vol. 133, no. 11, 2016, Art. no. 43049, doi: 10.1002/app.43049.
29. [29] G. B. Carvalho, S. V. Canevarolo, and J. A. De Sousa, “Correlation of fatigue behavior and dynamic mechanical properties of hybrid composites of polypropylene/short glass fibers/hollow glass beads,” J. Thermoplast. Compos. Mater., vol. 36, no. 5, pp. 2233–2259, 2023, doi: 10.1177/0892705721993190.
30. [30] A. Tessema et al., “Effect of filler loading, geometry, dispersion and temperature on thermal conductivity of polymer nanocomposites,” Polym. Test., vol. 57, pp. 101–106, 2017, doi: 10.1016/j.polymertesting.2016.11.015.
31. [31] F. Qiu, M. Wang, Y. Hao, and S. Guo, “The effect of talc orientation and transcrystallization on mechanical properties and thermal stability of the polypropylene/talc composites,” Compos. Part A Appl. Sci. Manuf., vol. 58, pp. 7–15, 2014, doi: 10.1016/j.compositesa.2013.11.011.
32. [32] S. K. Nayak and S. Mohanty, “Sisal glass fiber reinforced PP hybrid composites: Effect of MAPP on the dynamic mechanical and thermal properties,” J. Reinf. Plast. Compos., vol. 29, no. 10, pp. 1551–1568, 2010, doi: 10.1177/0731684409337632.
33. [33] M. O. Türkan, M. Öncül, and M. Savran, “Characterization and RSM-based modeling of sustainable Malva sylvestris L./polypropylene composites,” BioResources, vol. 21, no. 3, pp. 7848–7870, Jul. 2026, doi: 10.15376/biores.21.3.7848-7870.
34. [34] N. Putfak and A. Larpkasemsuk, “Wollastonite and talc reinforced polypropylene hybrid composites: Mechanical, morphological and thermal properties,” J. Met. Mater. Miner., vol. 31, no. 3, pp. 92–99, 2021, doi: 10.55713/jmmm.v31i3.967.
35. [35] A. Fajdek-Bieda and A. Wróblewska, “The use of natural minerals as reinforcements in mineral-reinforced polymers: A review of current developments and prospects,” Polymers, vol. 16, no. 17, 2024, Art. no. 2505, doi: 10.3390/polym16172505.
36. [36] K. Sever and M. Yılmaz, “Influence of wollastonite hybridization on the properties of artichoke-filled polypropylene composites,” Emerg. Mater. Res., vol. 9, no. 2, pp. 302–307, 2020, doi: 10.1680/jemmr.18.00121.