Statistical Evaluation and Comparison of Concrete Produced in Eskisehir with Concrete Produced in Different Provinces in Turkey

Yıl 2024, , 37 - 47, 13.03.2024

İlker Bekir Topçu , Emir Günaltılı

https://doi.org/10.31202/ecjse.1302920

Öz

In the research, statistical analysis of the compressive strength test results of concrete samples from C25/30 and C30/37 class ready-mixed concretes (RMC) produced in various concrete plants in Eskişehir in 2022 and poured in various construction sites and different construction sections (foundation and column, beam, slab) were made. The concrete quality was attempted to be evaluated in accordance with the C25/30 and C30/37 concrete classes created in different construction sites and building sections in Eskişehir using the results of the strength tests performed on a total of 1355 samples. The previous scientific studies were carried out within the framework of the statistical analysis of the compressive strength results of the C25/30 and C30/37 concrete class samples that were brought to the laboratory from various locations of different construction sites in Eskişehir, within the framework of the standards determined by the quality grades determined by ACI and TS EN 206. In the investigations, the information from the same strength classes that were poured in Eskişehir and different provinces in Turkey at various dates was compared and reviewed.

Anahtar Kelimeler

Concrete, Ready-mixed concrete, Quality Control, Statistics, Compressive Strength

Kaynakça

• [1] Y. Işık. The vitality in the construction sector continues, ready mixed concrete magazine. (125):8, September-October 2014.
• [2] M. Gürsu, Ü. Kalmış, and A. Akdağ. Statistical evaluation of the compressive strength of concrete produced at a highway construction site of the general directorate of highways and around ankara. In 1st National Concrete Congress Proceeding Book, page 172, Istanbul, May 1989.
• [3] T. Sofuoğlu and İ. B. Topçu. Statistical analysis of concrete poured at different construction sites in eskişehir in 2013. Journal of Science and Technology of Dumlupınar University, (035):17–28, 2013.
• [4] İ. B. Topçu and A. Uzunömeroğlu. Statistical analysis of ready-mixed concrete produced in ankara. Journal of Quantitative Sciences, 1(1):16–42, 2019.
• [5] İ. B. Topçu and A. R. Boğa. Statistical evaluation of concrete quality of ready-mixed concrete companies in eskişehir. Journal of ESOGU Faculty of Engineering & Architecture, 18(1):19–31, 2005.
• [6] İ. B. Topçu and A. Demir. A statistical evaluation on the quality of concrete poured in eskişehir. Journal of ESOGU Faculty of Engineering & Architecture, 17(2):41–50, 2004.
• [7] Turkey Building Earthquake Regulation. Ankara, 2018.
• [8] P. K. Mehta and P. J. M. Monteiro. Concrete: Microstructure, Properties and Materials. McGraw-Hill, 2006.
• [9] A. M. Neville and J. J. Brooks. Properties of Concrete. Pearson Education Limited, fourth edition, 2010.
• [10] C. C. Vu, O. Plé, J. Weiss, and D. Amitrano. Revisiting the concept of characteristic compressive strength of concrete. Construction and Building Materials, page 263, 2020.
• [11] S. Akman. Concepts in statistical evaluation of concrete. In İTÜ, Concrete Seminar, pages 211–230, Ankara, February 1984.
• [12] İ. B. Topçu. Quality control of on-site concrete produced in small and large construction sites in eskişehir. pages 189–198, May 1989. [13] E. Öztekin and A. Suvakçı. Investigation of class strength in structures using ready-mixed concrete in istanbul. pages 105–114, October 1994.
• [14] S. Akman. Importance of concrete quality for construction safety. pages 6–12, May 1989.
• [15] M. Uyan, S. Akyüz, and H. Yıldırım. An evaluation of the concrete poured in and around istanbul, ready mixed concrete magazine. pages 26–30, January-February 1999.
• [16] Regulation on Buildings to be Built in Disaster Areas. July 1998.
• [17] Classification according to concrete-compressive strength, 1988.
• [18] İ. B. Topçu, A. Ünverdi, and C. Karakurt. Statistical evaluation of concrete quality of a ready-mixed concrete company in eskişehir. Journal of ESOGU Faculty of Engineering & Architecture, 18(2):87–98, 2005.
• [19] S. Akyüz and M. Uyan. An investigation on the quality of concrete in istanbul and its surroundings. pages 160–171, May 1989.
• [20] M. Beyazıt and E. B. Yeğen Oğuz. Mühendisler İçin İstatistik. İstanbul, 2011.
• [21] B. Baradan, H. Yazıcı, and S. Aydın. Concrete. Number 334. Dokuz Eylül University, Faculty of Engineering Publications, İzmir, 2015.
• [22] M. Beyazıt and E. B. Oğuz. Statistics for Engineers. İstanbul, 2011.
• [23] F. Kocataşkın. Statistical quality control in concrete production. In IMO Istanbul Branch, Seminar of Concrete Technology and Problems, Istanbul, 1976.
• [24] İ. B. Topçu and A. Tuna. Statistical analysis of ready-mixed concrete produced in isparta. Journal of Technical Sciences, 12:56–61, 2022.
• [25] İ. B. Topçu and Ö. Ateşin. Statistical evaluation of concrete produced in kütahya. Journal of Science and Technology of Dumlupınar University, (030):56–63, 2013.
• [26] Guide to evaluation of strength test results of concrete, 2011.
• [27] S. Memiş, İ. G. Mütevelli, and M. U. Yılmazoğlu. Statistical evaluation of ready-mixed concrete produced in sinop province. Engineering Sciences, 11(4):83–92, 2016.
• [28] B. Dündar, İ. Atabey, and T. Ümit. Statistical evaluation of concrete quality produced in ready mixed concrete plants in osmaniye. Selcuk Technical Journal, 16(2):71–86, 2017.
• [29] E. Başaran. Evaluation of ready mixed concrete quality in afyonkarahisar. Afyon Kocatepe University Journal of Science, 2:51–58, 2010.
• [30] F. K. Firat. Statistical analysis of the quality of concrete used in antalya region. September 2005.
• [31] M. Davraz, E. Baspinar, and H. Ceylan. Ready-mixed concrete quality in isparta and its near before building inspection institutions. SDU J. of Technical Sci., 2(1):18–25, 2012.