Fire-off’un Pamuk ve Pamuk/Polyester Kumaşlarda Yanma Davranışının İncelenmesi

Öz

Bu çalışmada, fosfor-azot sinerjisi içeren bir güç tutuşurluk kimyasalı olan Fire-off ile apre uygulanmış, giyim ve ev tekstilinde kullanılabilecek pamuk ve pamuk/polyester (Co/PET) karışımı kumaşların kapsamlı yanma davranışları incelenmiştir. Deneysel çalışmalarda, farklı karışım oranlarına ve farklı gramaja sahip kumaşlar kullanılmış olup kumaşlar apre öncesi ve sonrası yanma risklerine göre sıralanmıştır. İşlem görmemiş %35/65 Co/PET kumaş yangın riski açısından en tehlikeli kumaş olarak saptanmış, fakat bu kumaş Fire-off apresi sonrası en güvenli hale gelmiştir. Konik kalorimetre verileri, ayrıca, işlem görmüş Co/PET kumaşların daha az yanma ısısı ürettiğini ve LOI değerlerindeki artış ile de doğrulanan daha iyi bir güç tutuşurluk özelliği kazandığını göstermiştir. Bütün kumaş tipleri için apre sonrası düşüş gözlenen efektif yanma ısısı, maksimum ısı yayılım oranı ve toplam ısı yayılım oranı değerleri gözönüne alındığında ise Fire-off’un alev yayılımını önlediği sonucuna varılmaktadır.

Anahtar Kelimeler

• Co/PET,Yanma davranışı,Konik kalorimetre,Yangın riski,Isı yayılımı

Investigation of Combustion Characteristics of Fire-off on Cotton and Co/Pet Fabrics

Öz

In this research, combustion behaviors of cotton and cotton/polyester (Co/PET) blend fabrics, which can be used in apparel and home textiles treated with phosphor-nitrogen synergetic flame-retardant (FR) agent, called Fire-off, were investigated. Different blend ratio and areal density of fabrics were used in the experiments and fabrics were ranked before and after treatment in terms of burning hazard. Untreated 35/65% blend Co/PET fabric was found most hazardous in accordance with fire risk. However, it became the safest after FR treatment with Fire-off. Cone calorimetric data, besides, showed that the treated cotton and Co/PET blend fabrics generated less heat of combustion and obtained better FR properties, which can be also confirmed by increase of LOI. Considering the decreased values of effective heat of combustion (EHC), peak heat release rate (pHRR) and total heat release rate (THR) for all samples, it is concluded that Fire-off is effective for preventing the flame spread.

Anahtar Kelimeler

• Co/PET,Combustion behavior,Cone calorimeter,Fire risk,Heat release

Destekleyen Kurum

The Scientific and Technological Research Council of Turkey-2214 International Doctoral Research Fellowship Programme

Teşekkür

The authors gratefully acknowledge the funding by The Scientific and Technological Research Council of Turkey, under grants of 2214 International Doctoral Research Fellowship Programme. The authors would like to thank Ata Textile for fabric supply and Prof. Dr. B. Kandola and Chen Zhou for the technical support in performing combustion tests in Bolton University, Institute for Materials Research and Innovation Laboratories.

Kaynakça

1. Horrocks, A.R. and D. Price, Fire retardant materials. 2001: Woodhead Publishing.
2. Fukatsu, K., Thermal degradation behaviour of aromatic polyamide fiber blended with cotton fiber. Polymer degradation and stability, 2002. 75(3): p. 479-484.
3. Nazare, S., B. Kandola, and A.R. Horrocks, Use of cone calorimetry to quantify the burning hazard of apparel fabrics. Fire and Materials, 2002. 26(4‐5): p. 191-199.
4. Ames, S. and S. Rogers. Large and small scale fire calorimetry assessment of upholstered furniture. in Proceedings of Interflam. 1990. Interscience Communications Ltd London.
5. Schartel, B., et al., Fire retardancy of polypropylene/flax blends. Polymer, 2003. 44(20): p. 6241-6250.
6. Yang, J.-C., et al., Flame retardation of cellulose-rich fabrics via a simplified layer-by-layer assembly. Carbohydrate polymers, 2016. 151: p. 434-440.
7. Li, Z.-F., et al., Fire retardant and thermal degradation properties of cotton fabrics based on APTES and sodium phytate through layer-by-layer assembly. Journal of Analytical and Applied Pyrolysis, 2017. 123: p. 216-223.
8. Huggett, C., Estimation of rate of heat release by means of oxygen consumption measurements. Fire and Materials, 1980. 4(2): p. 61-65.

9. Parker, W.J., Calculations of the heat release rate by oxygen consumption for various applications. Journal of Fire Sciences, 1984. 2(5): p. 380-395.
10. Ji, J., L. Yang, and W. Fan, Experimental study on effects of burning behaviours of materials caused by external heat radiation. Journal of Combustion Science and Technology, 2003. 9(2): p. 139-143.
11. Atakan, R., et al., Development of a flame retardant chemical for finishing of cotton, polyester, and CO/PET blends. Journal of Industrial Textiles, 2018: p. 1528083718772303.
12. Raziye Atakan, G.O. Mechanical Assessments of Fire-off on CO/PET Fabrics. IOP Conf. Ser.: Mater. Sci. Eng. 460 012052, 2018.
13. Horrocks, A.R., M. Tune, and L. Cegielka, The burning behaviour of textiles and its assessment by oxygen-index methods. Textile Progress, 1988. 18(1-3): p. 1-186.
14. Salmeia, K.A., S. Gaan, and G. Malucelli, Recent advances for flame retardancy of textiles based on phosphorus chemistry. Polymers, 2016. 8(9): p. 319.
15. 4589, B.E.I., Plastics-Determination of burning behaviour by oxygen index, in Part 2: Ambient-temperature test. 1999: Brussels.
16. BS ISO, E., Reaction-to-fire tests — Heat release, smoke production and mass loss rate in Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement). 2015: Switzerland.
17. Babrauskas, V., The cone calorimeter, in SFPE handbook of fire protection engineering. 2016, Springer. p. 952-980.
18. Schartel, B., M. Bartholmai, and U. Knoll, Some comments on the use of cone calorimeter data. Polymer degradation and stability, 2005. 88(3): p. 540-547.