SiC partikülleri matriks içine farklı ağırlık
oranlarında katılarak Si3N4-SiC kompozit hazırlanmıştır.
Numuneler iki farklı yöntem ile sinterlenmiştir. Numunelere basınçsıs
sinterleme ve spark plazma sinterleme yöntemleri uygulanmıştır. Birinci
yöntemde, kompozitleri preslemede soğuk izostatik metodu kullanılmıştır.
Numuneler 1850 0C’de azot atmosferi altında 1 saat basınçsız olarak
sinterlenmiştir. İkinci yöntemde, numuneler azot atmosferi altında 1650 0C’de
5 dakika spark plazma ile sinterlenmiştir. AlN and Y2O3
sinterlemeye yardımcı olması için katılmıştır. SiC partiküllerinin Si3N4
matrisine eklenmesi, sinterlenmiş numunelerin yoğunluk ve mikroyapı
özelliklerinin kontrol edilmesinde kritik rol oynar. Bileşim ve mikroyapının,
sinterlenmiş numunelerin özelliklerine etkisi analiz edilmiştir.
Silisyum Nitrür silisyum karbür soğuk izostatik pres sinterleme
Si3N4-SiC composites were prepared by adding SiC particles to the matrix in different weight
ratios.The samples were sintered with two different methods. The samples were
produced by pressureless sintering and spark plasma sintering method. In the
first method, cold isostatic pressing method was used to press the composites.
The samples were pressureless sintered at 1850 0C for 1 hour under
the nitrogen atmosphere. In the second method, the samples were spark plasma
sintered at 1650 0C under nitrogen atmosphere under 40 MPa for 5
minutes. AlN and Y2O3 were also added to Si3N4-SiC
composite mixture to aid sintering. Addition of SiC particles to the Si3N4
matrix play critical role in controlling of densificication and
microstructure properties of the sintered samples. The effect of composition
and microstructure on properties of sintered samples was analyzed.
Silicon nitride silicon carbide cold isostatic press sintering
Birincil Dil | İngilizce |
---|---|
Konular | Mühendislik |
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 31 Ağustos 2019 |
Yayımlandığı Sayı | Yıl 2019 Cilt: 12 Sayı: 2 |