Kapak Resmi
e-ISSN: 2528-8733
Yayımcı: Harran Üniversitesi

Harran Üniversitesi Mühendislik Dergisi

Yayın Modeli: Süreli Yayın (Mart - Haziran - Eylül - Aralık)

Dergi Kurulları

Baş Editör

Kasım Mermerdaş
Yapım Teknolojileri, Betonarme Yapılar, Yapı Mühendisliği, Yapı Malzemeleri, İnşaat Yapım Mühendisliği

Sorumlu Editör

Oğuz Şimşek
Doç. Dr. Oğuz Şimşek
HARRAN ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ
Sayısal Modelleme ve Mekanik Karakterizasyon, Akışkan Mekaniği ve Termal Mühendislik, Mühendislik, Türbülanslı Akışlar, Hidromekanik, Su Kaynakları Mühendisliği, Hidroloji

Editör Yardımcısı

Gökhan Demircan
Doç. Gökhan Demircan
HARRAN ÜNİVERSİTESİ
Nanomalzemeler, Makine Mühendisliği, Kompozit ve Hibrit Malzemeler, Polimerler ve Plastikler, Nanoteknoloji, Nanoölçekli Karakterizasyon, Lif Teknolojisi, Polimer Bilimi ve Teknolojileri
Yunus Kaya
Uzaktan Algılama, Fotogrametri, Geomatik/Harita Mühendisliği

 

Yayın veya Danışma Kurulu

JC
Doç. Dr. João Pedro Leal Abalada De Matos Carvalho
LASIGE and Dept. of Informatics of the Faculty of Sciences of the University of Lisbon
Fotogrametri ve Uzaktan Algılama, Elektrik Mühendisliği (Diğer)

João Pedro Carvalho received the M.Sc. (Hons.) and Ph.D. degrees in electrical and computer engineering from FCT NOVA, Portugal, in 2017 and 2021, respectively. He is currently Assistant Professor at the Dept. of Informatics of the Faculty of Sciences of the University of Lisbon. Since 2025, he has been an Integrated Member of LASIGE and collaborator of the Center of Technology and Systems (CTS), UNINOVA, and COPELABS. He won the highly competitive Scientific Employment Stimulus (CEEC institutional) FCT grant in 2021. He has published more than 50 papers in international journals and international conferences in the fields of remote sensing, pattern recognition, machine learning, sensor networks, and signal processing, with significant recognition and impact in the research community.

Füsun Balık Şanlı
Prof. Dr. Füsun Balık Şanlı
YILDIZ TEKNİK ÜNİVERSİTESİ
Mühendislik, Fotogrametri ve Uzaktan Algılama
Aliihsan Şekertekin
Prof. Dr. Aliihsan Şekertekin
IĞDIR ÜNİVERSİTESİ, IĞDIR TEKNİK BİLİMLER MESLEK YÜKSEKOKULU
Geomatik/Harita Mühendisliği , Fotogrametri ve Uzaktan Algılama
Hasan Bilgehan Makineci
Doç. Hasan Bilgehan Makineci
Konya Teknik Üniversitesi
Fotogrametri, Fotogrametri ve Uzaktan Algılama, Uzaktan Algılama
Mehmet Ali Dereli
Prof. Dr. Mehmet Ali Dereli
GİRESUN ÜNİVERSİTESİ
Planlamada Coğrafi Bilgi Sistemleri (CBS), Uzaktan Algılama
PC
Dr. Paul Cureton
Lancaster University
Ciddi Oyunlar ve Simülasyonlar, Mimarlık (Diğer), Arazi Kullanımı ve Çevre Planlaması

Dr Paul Cureton FRSA is Director of Post-Graduate Research, LICA, Director of PhDs, Design and Senior Lecturer in Design at ImaginationLancaster, and a member of the Data Science Institute (DSI). His work transcends subjects in spatial planning, 3D GIS modelling and design futures. It is at the forefront of exploring the critical interface of new and emerging socio-technological relationships such as Design for Digital Twins, Drone Futures and novel process-based methodologies for Future Environments such as Geodesign and XR interactions. His recent publications include the monographs, Strategies for Landscape Representation: Digital and Analogue Techniques (Routledge, 2016) and Drone Futures: UAS for Landscape & Urban Design (Routledge, 2020). He is a co-author with Nick Dunn of Future Cities: A Visual Guide (Bloomsbury, 2020).

Alias Abdul Rahman
Prof. Dr. Alias Abdul Rahman
University Teknologi Malaysia
Jeoinformatik (Diğer), Planlamada Coğrafi Bilgi Sistemleri (CBS)

Professor in 3D GIS at Universiti Teknologi Malaysia. Co-Chair for Land Administration Domain Model at FIG (Federation International of Geomatic) from 2022 to 2026.

Eray Şimşek
Bitki Biyokimyası, Tarımda Bitki Bakteriolojisi, Bitki Gelişim ve Üreme Biyolojisi, Bitki Koruma (Diğer), Bitki Biyoteknolojisi, Herboloji, Mikoloji, Fitopatoloji, Bitki Fizyolojisi, Ziraat, Veterinerlik ve Gıda Bilimleri, Bakteriyoloji, Bitki Patolojisi, Bitki Hücresi ve Moleküler Biyoloji
BB
Doç. Bülent Başyiğit
HARRAN ÜNİVERSİTESİ
Gıda Mikrobiyolojisi, Gıda Mühendisliği
Pelin Yapıcıoğlu
Çevresel Biyoteknoloji (Diğer), Çevre Mühendisliği, Su Kalitesi ve Su Kirliliği
KK
Dr. Kerim Karadağ
HARRAN ÜNİVERSİTESİ
Elektrik Mühendisliği (Diğer), Modelleme ve Simülasyon, Elektrik Mühendisliği
MÖ
Prof. Dr. Mustafa Özen
HARRAN ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ
Katı Mekanik, Sonlu Elemanlar Analizi, Kompozit ve Hibrit Malzemeler
Hüsamettin Bulut
Prof. Dr. Hüsamettin Bulut
Harran Üniversitesi
Makine Mühendisliği (Diğer), Enerji, Enerji Üretimi, Dönüşüm ve Depolama (Kimyasal ve Elektiksel hariç), Yenilenebilir Enerji Sistemleri, Otomotivde Isı Transferi
Süleyman İpek
Doç. Süleyman İpek
YASAR UNIVERSITY
Yapı Mühendisliği, Yapı Malzemeleri

Dr. Süleyman İpek was born in 1987 in Diyarbakır, Türkiye. He completed his primary, secondary, and high school education in Diyarbakır, Türkiye. In 2010, he graduated from the Civil Engineering Department at Gaziantep University (Gaziantep, Türkiye) and commenced employment as a research assistant at the Engineering and Architecture Department of Bingöl University (Bingöl, Türkiye).

He holds a Master's degree and a doctorate in Civil Engineering from the Institute of Science and Technology at Gaziantep University, respectively, awarded in 2013 and 2019. He was subsequently appointed as an Assistant Professor in the Architecture Department at Bingöl University. In 2023, he was awarded the Associate Professor degree in Civil Engineering by the Presidency of the Interuniversity Board of Türkiye. In 2024, he was appointed to the role of Associate Professor in the Civil Engineering Department at Bingöl University. In September 2024, he relocated from Bingöl University to the Civil Engineering Department at Yasar University (İzmir, Türkiye), where he continues to be employed.

His research interests lie primarily in the areas of modeling and concrete technology. In particular, he is engaged in investigations into the fresh and hardened properties of concrete, the mechanical and fracture performances of concrete, the production and examination of special types of concrete utilizing waste and commercially available materials, and the modeling of the properties of construction materials and the performance of structural members.

Dr. İpek has published extensively in the field, with over 50 articles in internationally and nationally indexed journals, as well as three book chapters. He has also participated in 15 international and national congresses, conferences, and symposia, where he presented 15 full-text papers/abstracts. Additionally, he has served as a coordinator and scholar on two TUBITAK-funded projects.

Nadhim Hamah Sor
Dr. Nadhim Hamah Sor
University of Garmian
Yapı Malzemeleri, Kompozit ve Hibrit Malzemeler, İnşaat Yapım Mühendisliği, Çimento Teknolojisi, Polimer Teknolojisi, Yapım Teknolojileri, Betonarme Yapılar, Yapı Mühendisliği, Nanomalzemeler, Kırılma Mekaniği, Malzeme Üretim Teknolojileri, Malzeme Mühendisliğinde Seramik
GS
Prof. Dr. Gencay Sarıışık
HARRAN ÜNİVERSİTESİ
Endüstri Mühendisliği
Harun Çiğ
Bulut Bilişim Güvenliği, Yazılım Kalitesi, Süreçler ve Metrikler, Yazılım Mimarisi, Bilgi ve Bilgi İşleme Bilimleri, Görüntü İşleme, Derin Öğrenme, Biyoenformatik
Yunus Eroğlu
Doç. Yunus Eroğlu
Gaziantep Üniversitesi, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümü,Yöneylem Araştırması Anabilim Dalı
Stokastik (Olasılıksal) Süreçler, Üretimde Optimizasyon, Makine Öğrenme, Çok Ölçütlü Karar Verme, Yöneylem Araştırması, Matematikte Yöneylem Araştırması, Ergonomi ve İnsan Faktörleri Yönetimi, Yapay Zeka, Endüstri Mühendisliği, İmalat Yönetimi
Bülent Haznedar
Doç. Dr. Bülent Haznedar
GAZİANTEP ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, BİLGİSAYAR MÜHENDİSLİĞİ BÖLÜMÜ
Bulanık Hesaplama, Evrimsel Hesaplama, Makine Öğrenme, Derin Öğrenme, Nöral Ağlar, Yapay Zeka
Rasoul Daneshfaraz
Su Kaynakları ve Su Yapıları, Hidromekanik, Hidrodinamik ve Hidrolik Mühendisliği

Prof. Dr. Rasoul Daneshfaraz was born in 1972 in Tabriz, East Azerbaijan Province, Iran. He completed his bachelor's at Urmia University, Iran. Master's and doctoral degrees from Ege University in Türkiye, respectively. He has published more than 300 articles in journals and conferences, and is a reviewer of reputable scientific journals in his field. He has authored various books on hydraulics, fluid mechanics, and mathematical and laboratory models. He is currently a full professor at Maragheh University and has scientific collaboration with Recep Tayyip Erdogan University in Türkiye.

Uttam Pawar
Dr. Uttam Pawar
HPT Arts and RYK Science College
Su Kaynakları Mühendisliği, Drenaj

Uttam Pawar is an Assistant Professor in the Department of Geography, HPT Arts and RYK Science College, Nashik, Maharashtra (India). His research focuses mainly on Climate variability, rainfall trend, Flood hazards, climate change, groundwater potential analysis and GIS mapping.

Uttam completed his PhD from the Tilak Maharashtra Vidyapeeth, Pune. His research investigated causes and characteristics of floods in the Mahi River Basin: Western India based on geomorphological, hydrological and meteorological analyses. He has presented research paper in national and international conferences. Besides, he worked on rainfall trends and river basins from India, Sri Lanka and Southeast Asia (Mekong River). He has published research articles on rainfall trends, spatio-temporal rainfall variability and floods, flood modeling. 

Serkan Kaya
Doç. Dr. Serkan Kaya
HARRAN ÜNİVERSİTESİ
Üretimde Optimizasyon, Üretim ve Hizmet Sistemleri, Endüstri Mühendisliği, Çok Ölçütlü Karar Verme

Yazım ve Dil Editörü

UK
Veri Analizi, Evrimsel Hesaplama, Görüntü İşleme, Yapay Zeka

Mizanpaj Editörü

Halil İbrahim Şenol
Coğrafi Bilgi Sistemleri, Şehir ve Bölge Planlama, Mühendislik

Dr. Halil İbrahim Şenol is an Assistant Professor at Harran University, specializing in Geomatics Engineering and Cartography. With B.Sc., M.Sc., and Ph.D. degrees from Yıldız Technical University, his research focuses on GIS and DEM integration, smart cities, remote sensing, earth observation, and map education for children.

Abuzer Açıkgöz
Makine Mühendisliği, Makine Tasarımı ve Makine Elemanları, Malzeme Tasarım ve Davranışları, Kompozit ve Hibrit Malzemeler, Toz ve Parçacık Teknolojisi
Son Güncelleme Zamanı: 9 Eylül 2026