For word template (Template) 

Style file (Endnote, mendely, zotero)

Copyright Form

El-Cezeri Science and Engineering Journal (ECJSE) is a research Journal covering Science and Engineering, which started its publication in 2014. To establish scientific communication between scientists working in the fields of Science and Engineering. The journal accepts both original research articles and review articles in science, engineering, and architecture in English only via the Journal website (https://dergipark.org.tr/en/pub/ecjse).
 

The journal is free and does not charge any publication fee from the authors. The articles published in the journal are open-access.
El-Cezeri Science and Engineering Journal publishes scientific original articles under the following headings.

Research Articles: Studies that reflect original research with findings and results.
Review Articles: These are articles scanning a sufficient number of scientific articles, summarizing the subject at the level of today's knowledge and technology, and evaluating and comparing these findings.
Technical Note: This is a new method or technique describing important findings of a given research.

Each article is sent to at least two reviewers and the evaluation phase is carried out in terms of form and content. The single-blind reviewing procedure is used in the reviewing process.

ARTICLE STRUCTURE

Text: The text should be written in Times New Roman font in 12 pt, and must not exceed 20 pages, including references and figures. Authors should state what type of manuscript their article is (Research Article, Review Article, Technical Note).
Title: The title of the study must be written in Times New Roman 14 pt with the first letters being capitalized, the title should be appropriate, short, and clear. 
The only first letters of the words for all headings must begin with a capital letter. The titles should be written in bold font. Numbering should start from 1 for the main sections.
Abstract: It should be written not exceeding 200 words.
Keywords: The number of keywords should be no more than five.
Text: It generally includes the introduction, methodology, conclusions, and discussions related to the results.
Tables and Figures: All images (photographs, drawings, diagrams, graphics, maps, etc.) that do not contain tables should be named as shapes. Each table and figure should be placed in the nearest cited text. Each chart and figure should be placed in the closest cited place in the text. All figures and tables should be numbered consecutively in the text.
Formula and Units: All formulas in the text should be written in equation format. Formulas should be numbered (1), and (2). All units must be in the SI unit system.
Footnotes
The information required to cite the article and the ORCID numbers of the authors should be added. Article information should be written in accordance with reference writing rules.
Symbols and Abbreviations: Can be given before references at the end of the text.
Acknowledgment: If a person or organization is to be acknowledged, it should be written in this section and given before the references.
References: In the brackets [1], [2], etc., should be numbered with numbers and written at the end of the text according to the order in which they were given in the study.

Journal article
[Ref number] Format for journals:[1, 2]

Author, Title, Journal, Year, Volume (Issue), Pages.

[Ref number] Format for electronical article:[3]
Author, Title, Periodical Title, Year, Volume, Pages, DOI.

[1] Ekrem M. and Avci A., Effects of polyvinyl alcohol nanofiber mats on the adhesion strength and fracture toughness of epoxy adhesive joints, Composites Part B-Engineering, 2018, 138, pp. 256-264.

[2] Ulus H., Kaybal H.B., Berber N.E., Tatar A.C., Ekrem M., Ataberk N., and Avci A., An experimental evaluation on the dynamic response of water aged composite/aluminium adhesive joints: Influence of electrospun nanofibers interleaving, Composite Structures, 2022, 280, pp. 114852.

[3]Uslugil Y., Feyzullah A., Ekrem M., and Avcı A., Mechanical alloying of NiTi alloys with Ag and Cu nanoparticles: synthesis and characterization, Physica Scripta, 2025, 100(7), pp. 075927, DOI: 10.1088/1402-4896/ade018.

 

Conference paper
[Ref number] Format for papers presented at conferences (when available online):[4]
Author, Title, in Conference Name, Year of Conference, Conference Location, Publisher.
 

[4] Yılmaz M. and Ekrem M., Low-Velocity Impact Resistance of Nylon 6.6 Nanofiber-Reinforced Epoxy Adhesives Used in Aircrafts. 2024, Cham, Springer International Publishing.

Book
[Ref number] Format for books: [5, 6]
Author, Title, Edition ed. Series Title, ed. Series Editor, Volume, Year, Place Published, Publisher. 

Format for book section:[7]
Author, Title, in Book Title, Editor, Year, Publisher, Place Published, Pages. 
 

[5] Fangueiro R., Fibrous and composite materials for civil engineering applications, 2011, Elsevier.
[6] Cooper R.A., Ohnabe H., and Cooper R., An introduction to rehabilitation engineering, 2025, CRC Press.
[7] Polyurethane P., Ak S., and Ekrem M., Hybrid Nanoparticle-Reinforced Polyurethane Composites Mechanical Behavior, in Solutions for Maintenance Repair and Overhaul, T. Hikmet Karakoc, et al., Editors, 2023, Springer, pp. 467.

Thesis
[Ref number]  Format for theses (M.S.) and dissertations (Ph.D.):[8]
a) Author, “Title of thesis,” M.S. thesis, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.
b) Author, “Title of dissertation,” Ph.D. dissertation, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.

[8] Ekrem M., Fracture Behavior of Epoxy Adhesives Reinforced with Carbon Nanotubes and Polyvinyl Alcohol Nanofibers in Aluminum Joints, PhD Dissertation, The Graduate School of Natural and Applied Sciences, Selcuk University, 2015.

Web Sites
[Ref number] Format for Web page:[9]
Author, Title, Series Title, Access Date, Available: URL.
[8] Kaya H., Ekrem M., and Uslugil Y., 01.01.2026, Available from: https://dergipark.org.tr/tr/pub/ecjse/issue/95086/1766935.

APPLICATION
For publishing in El-Cezeri Science and Engineering, scientific original articles should be sent online after the registration process on the journal web page (https://dergipark.org.tr/en/login). 
For the sample article (Template) click here.
In the article submission steps, at least five related reviewer names, surnames, and e-mail addresses should be written in the Letter of Editors. Recommended reviewers should be different from the institutions with which the author(s) are affiliated.

Checklist
In the application process, authors must check the compliance of their submissions with all the items in the list below, applications that do not comply with this guideline will be returned to the authors.
• The submitted article has not been published before and has not been submitted for review (or a statement has been made in the Notes to the Editor).
• The article (manuscript) file is in the form of an OpenOffice, Microsoft Word, RTF, or WordPerfect document file.
• URLs for references are provided when available.
• The text is single-spaced, written in 12 pt. 
• All figures, pictures, and tables are placed in appropriate parts of the text instead of page breaks. For printing, send quality copies of the pictures as attachments. If the size of the file sent is too large, the system may not receive it. In such cases, you can split the article and send the other sections one by one as additional files.
• The text has been prepared in accordance with the formal and bibliographic requirements set forth in the Author Guide in the "About the Journal" section.

 

WORD (Template) for the article.
 

Ethical Principles

The El-Cezerî Journal of Science and Engineering (ECJSE) follows the guides and politics published by the Committee on Publication Ethics (COPE) for ethical rules and responsibilities of authors, journal editors, reviewers, and publishers.

The manuscripts submitted to ECJSE must be original, must have not been published elsewhere, and must not be simultaneously considered in another journal. It is the responsibility of the submitting author to ensure that the publication of the paper has been approved by all co-authors. The manuscript should not contain any statements that are contrary to the law and will result in a violation of the rights. By submitting the manuscript, all authors acknowledge that the journal does not have any responsibility for its results and interpretations of it.

Ethics approval is needed for studies on vulnerable populations, policies, confidential data, ethical business/marketing practices, clinical research on human subjects, research using animals, and retrospective subjects. Ethics committee approval should be stated together with the board name, date, and number in both the “Method” section of the manuscript as well as its last page.

All manuscripts submitted to ECJSE are first assessed by the Editor to find out their suitability for the Journal. Suitable manuscripts are then scanned by the similarity software as described in the Anti-Plagiarism Policy section of the journal website. Appropriate manuscripts are sent to at least two expert reviewers to assess the scientific level of the paper. ECJSE adopts a single-blind review system in which the reviewers’ identities remain anonymous to the authors. Manuscripts are expected to meet certain standards of scientific excellence to get published in the Journal.

ECJSE is an open-access journal publishing original research papers and review articles in both Turkish and English. The evaluation of the initial article submission is expected to take an average of three months. Authors can publish their articles in ECJSE free of charge, and readers can also access the published articles at no charge.

Declaration of Ethical Standards:

If the study does not require Ethics Approval, the following declaration can be used:

“The author(s) of this article declares that the materials and methods used in this study do not require ethical committee permission and/or legal-special permission.”

Otherwise, please declare the board name granting ethics approval, approval date, and approval number.

Publication Policy

1. El-Cezeri Science and Engineering Journal is a national and international indexed scientific research journal with referees, which has been published in the areas of engineering sciences and design applications three times in a year including in January, May and September regularly since 2014.

2. The full-length original scientific research articles written in English language are published. It is essential that the information created in scientific study needs to be new, suggest new method or give a new dimension to an existing information.

3. Case studies, questionnaire studies and surveys are also published in the journal.

4. The full-length original scientific research articles written in English language have the priority of publication.

5. Articles submitted to the journal for publication are evaluated by national and/or international reviewers. The final decision is made by the editors.

6. Names of reviewers evaluating the articles aren’t informed to the authors (blind peer review). The names of the authors not to be seen by the reviewers (double-blind peer review) is left to the preference of the authors. The authors using this preference should delete the lines of name and address in the article.

7. It is expected that the reviewers evaluate the articles in 60 days. If this time is exceeded, the editorial board appoint a new reviewer.

8. Accept-decline decision about the article is taken by the editorial board. According to the reviewers reports, major revision or minor revision can be decided. The articles, which aren’t reached intended level or aren’t seemed enough in terms of scientific perspective, are declined.

9. After the decision of major or minor revision about the article, the necessary changes should be made by the authors in 40 days for major revision, in 20 days for minor revision; else it is declined.

10. Articles submitted to the journal for publication must not be published in another journal or must not be sent another journal to be published.

11. All responsibility of the articles belong to the authors. The articles should be prepared in accordance with the international scientific ethics rules. If necessary, a copy of the ethics committee report must be added.

12. Articles submitted for a possible publication in the journal have been checked with iThenticate: Plagiarism Detection Software package program to compose similarity report since January 1, 2016. This report is sent to the editorial board to be checked. If the program detects more than 30 percentage similarity except that the references, the editorial board requests the revisions from the authors. If the necessary changes does not make in 20 days, the article is declined. If the similarity rate is very high, the article is declined, too.

13. The Copyright for all authors have been accepted to transfer for the accepted articles in the journal by automatically.

14. Articles submitted to the journal for publication must be prepared to the article writing format of the journal.

15. The authors must be declared to Conflicts of Interest in the submission process.

16. The articles prepared by the article writing format of the journal has no limited number of pages. Abstract should include at least 100 words and the number of keywords must be at least 3 to 7.

17. Journal does not charge any publication or processing fee.

18. For articles admitted for publication into the journal, the corresponding author has 30 days for copyediting, 10 days for proofreading. If the corresponding author do not return in time, the article is declined.