Manuscript Preparation
Paper Types:
1) Research Articles
2) Review Articles*
* Journal of Emerging Computer Technologies prioritizes publishing research articles but accepts review articles, too.
Limits and Constraints for Authors
- An article that has been previously rejected for any reason is not taken into consideration and is rejected directly.
- An author can publish a maximum of one article in the Journal of Emerging Computer Technologies within one years, regardless of the author's order in the article.
- The maximum number of authors in an article should be 3. In cases where more authors are required, a cover letter stating the reasons should be prepared for the editor and uploaded to the system at the time of submission.
- Journal of Emerging Computer Technologies is an international journal. It strictly follows the geographical distribution of the authors of the articles published in the journal. In case of intense demand for article publication from a certain country and geography, the publisher or editor has the right to reject these papers or consider them for future issues to ensure geographical diversity.
- In such cases, if the authors do not comply with the rules or upload the article to the system without stating the reasons, the editor/editorial board may reject the article without taking it into the evaluation process and giving a reason.
Articles will be DIRECTLY REJECTED WHEN the paper does not satisfy any of the following:
- The article's relationship with the scope of the journal is NOT sufficient.
- The purpose of the study and the research question is NOT given in the context or is NOT clear. The research question should be given in sufficient detail to understand it clearly
- Methods - There should be a methods section that describes the approach clearly.
- Contribution to the field - The paper should have a contribution to the field and clearly describe it.
- Ethics - If there is any sign of plagiarism or a repeated/well-known study in the literature.
- The findings/results are discussed sufficiently in a scientific cause-effect relationship by the purpose.
Manuscript Preparation
The manuscript should be written in clear, concise and grammatically correct English. It is recommended that you ask colleagues to read over your paper prior to submission to ensure it is of a high standard and conforms to a high level of scientific writing.
The maximum length is typically 15 pages for research papers and 20 pages for surveys(review papers).
Journal of Emerging Computer Technologies is a template-free journal at submission.
Accepted papers should be written using the standard JECT Article format ( Download the Microsoft Word Template ) or JECT Latex Format (Download Latex Format).
Download the Microsoft Word Template by clicking or using the link https://dergipark.org.tr/en/download/journal-file/34655
Download the Latex Template by clicking or using the link https://drive.google.com/file/d/1wJ0Vxtrfse8-qqQZz4zdLi8JH_zDbKi-/view?usp=drive_link
Other Required Files:
Attention to Authors
It is the responsibility of the author to obtain permissions, including paying any fees, for your figures, diagrams, schemes, tables and text. The author must also provide the appropriate acknowledgement text in the caption in the format prescribed by the copyright owner. For example: Reprinted by permission from Macmillan Publishers Ltd: [JOURNAL NAME] (reference citation), copyright (year of publication).
Submission Steps on Dergipark
Order of Manuscript
The manuscript should be presented in the following order.
Title Page
This should contain the title of the contribution and the names and addresses of the authors. The full postal address, e-mail address, telephone and facsimile number of the author who will receive correspondence and check the proofs should be included.
Running Head
The running head or short title is the shortened version of your manuscript title. Not only does this help to identify your manuscript during the evaluation process, but it also acts as the manuscript title on the journal homepage providing information at a glance for people who are reading the journal.
Abstract
All manuscripts must include a brief but informative Abstract. It should not exceed 300 words and should describe the scope, hypothesis or rationale for the work and the main findings. The abstract should allow the reader to quickly have a clear idea about the rationale for the work, the experiments conducted and the results of those experiments before reading the rest of the manuscript. Both common and scientific names should be included; the authorities are not given if they appear in the title. References to the literature and mathematical symbols/equations should not be included.
Keywords
Keywords (3-5) should be provided below the Abstract to assist with indexing the article.
Introduction
The Introduction should briefly indicate the objectives of the study and provide enough background information to clarify why the study was undertaken and what hypotheses were tested.
Materials and Methods
This section should be concise but provide sufficient detail of the material used and equipment and the procedure followed to allow the work to be repeated by others.
Results
Results should be presented in a logical sequence in the text, tables and figures. Repetitive presentation of the same data in tables and figures should be avoided. The results should not contain material appropriate to the Discussion. All tables, graphs, statistical analyses and sample calculations should be presented in this section.
Discussion
The results should be discussed in relation to any hypotheses advanced in the Introduction. Comment on results and indicate possible sources of error. Place the study in the context of other work reported in the literature. Only in exceptional cases should the “Results and Discussion” sections be combined. Refer to graphs, tables and figures by number. This helps tie the data into the text in a very effective manner. Authors should also take future research and limitations into account in the Discussion section.
Conclusion
The main conclusions of the experimental work should be presented. The contribution of the work to the scientific community and its economic implications should be emphasized.
Consent For Publication
N/A.
Acknowledgement
This title is mandatory in the article. The source of financial support must be acknowledged. Authors must declare any financial support or relationships that may pose a conflict of interest in the cover letter submitted with the manuscript. Technical assistance may also be acknowledged.
Funding Information
This title is mandatory in the article. The authors should acknowledge the funders of this manuscript and provide all necessary funding information.
Author Contributions
This title is mandatory in the article. Authors are required to include a statement of responsibility in the manuscript that specifies each author's contribution. The level of detail varies; some disciplines produce manuscripts that comprise discrete efforts readily articulated in detail, whereas other fields operate as group efforts at all stages.
Conflict of Interest
This title is mandatory in the article. A conflict of interest exists when judgment regarding the research is influenced by factors such as financial gain or personal relationships. All authors must disclose any financial, personal, or other associations that may affect or be perceived to influence their work.
Data Availability
This title is mandatory in the article. A sample text can be as follows. "The datasets generated and analyzed during the current study are available from the corresponding author upon reasonable request." If there is any specific information about the data, it should be shared here.
Declaration of AI Usage
No AI tools were used in the creation of this manuscript.
References
The Authors are responsible for ensuring that the information in each reference is complete and accurate. Only published and “in press” references should appear in the reference list. Do not use internet sources in your lists. References should follow APA style and be numbered in brackets [ ]. They should appear in the order in which they are cited in the article. Given that Computer Science and related topics are current and rapidly evolving, ensure that your references are up-to-date and cite high-impact sources, such as journals indexed in Scopus or Web of Science, or books published by reputable academic institutions, non-governmental organizations, or high-quality publishers. Please add complete DOI numbers at the end of each reference if it has one.
Tables
Tables should be self-contained and the data should not be duplicated in figures. Tables should be numbered consecutively. Each table should be presented on a separate page with a comprehensive but concise legend above the table. Tables should be double-spaced and vertical lines should not be used to separate columns. Column headings should be brief, with units of measurement in parentheses. All abbreviations should be defined in footnotes. Use superscript letters (not numbers) for footnotes and keep footnotes to a minimum. *, **, *** should be reserved for P values.
Figures
Only necessary illustrations should be included. All illustrations (line drawings and photographs) are classified as figures. Figures should be cited in consecutive order in the text. Figures should be sized to fit within the column or the full text width. Line figures should be supplied as sharp, black and white or colour diagrams, drawn with a computer graphics package. Photographs should be sharp and magnifications should be indicated on photographs using a scale bar. Graphics should be supplied as high-resolution (at least 300 d.p.i.) electronic files. Digital images supplied as low-resolution cannot be used and will not be accepted. The legend should incorporate definitions of any symbols used and all abbreviations and units of measurement should be explained so that the figure can be understood without reference to the text.
Abbreviations and Units
SI units as outlined in the latest edition of Units, symbols and Abbreviations: A Guide for Medical and Scientific Editors and Authors (Royal Society of Medicine Press, London), should be used wherever possible. Statistics and measurements should always be given in figures; except where the number begins the sentence. When the number does not refer to a unit measurement, it is spelt out, except where the number is greater than nine. Use only standard abbreviations. The word Figure should be shortened to Fig. unless starting a sentence.
Online Submission
You can submit your prepared manuscript using our online submission system which you can access using the link given below.
Submit your Article by clicking or using the link https://dergipark.org.tr/en/journal/3599/submission/step/manuscript/new
Licensing Agreement
CC BY license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use.
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Review Process
https://dergipark.org.tr/en/pub/ject/page/14588
Post-Production Manuscript Revisions
https://dergipark.org.tr/en/pub/ject/page/14593
Retractions
https://dergipark.org.tr/en/pub/ject/page/14585
Policy - Generative AI usage key principles
https://dergipark.org.tr/en/pub/ject/page/17850
December 31, 2025
Page
1-8
