Süt Yağının Toza Dönüştürülmesi ve Krema Tozu

Yıl 2019, , 72 - 80, 26.03.2019

Ahsen Burçin Himmetağaoğlu Zafer Erbay , Mustafa Çam

https://doi.org/10.24323/akademik-gida.544661

Cited By: 1

Öz

Süt yağı, tereyağı ve
krema gibi bazı süt ürünlerinin ana maddesi olmasının yanı sıra, çeşitli süt
ürünlerinde de kalite artırıcı bir bileşendir. Dünya çapında artan süt üretimi
ve tüketicilerin beslenme alışkanlıklarının değişmesiyle yağ içeriği düşük ürünlere
artan eğilim, süt yağı ve tereyağında üretim fazlasının oluşmasına neden
olmuştur. Süt yağının raf ömrü kısadır ve oksidasyona karşı dayanıksızdır. Oda
koşullarında tereyağı olarak depolandığında yaklaşık 4 hafta, buzdolabı
koşullarında ise yaklaşık 6 ay bozulmadan saklanabilmektedir. Ancak soğukta
depolama seçeneği çok maliyetlidir ve süt yağının kurutulması önemli bir
dayandırma alternatifi olarak öne çıkmaktadır. Süt yağı püskürtmeli kurutma
yöntemi ile toz forma dönüştürülebilmektedir. Ancak kurutulmuş halde dahi süt ve ürünlerinin
tozlarında yağ oksidasyonu ve Maillard reaksiyonu gibi olumsuz değişiklikler
gözlenebilmektedir. Mikroenkapsülasyon yöntemiyle, kolayca bozulabilen
gıdaların korunması, çevresel faktörlere daha dayanıklı, daha kararlı ürünlerin
elde edilmesi mümkündür. Bu çalışmada, süt yağının toza dönüştürülmesinin önemi
ile krema tozu ve üretimi açıklanmış, süt yağının toza dönüştürülmesi alanında
yapılmış bilimsel çalışmalar özetlenmiştir.

Anahtar Kelimeler

Süt yağı, Krema tozu, Mikroenkapsülasyon, Püskürtmeli kurutma

Converting Milk Fat into Powder and Cream Powder

Öz

Milk fat is the main component and a quality-enhancing
ingredient for dairy products such as cream and butter. The increase in worldwide
milk production and demand of reduced fat products due to changing of dietary
habits, create a surplus of butter and milk fat supply. Milk fat is highly
perishable with a short shelf life. Butter is stable at room temperature for
about 4 weeks and about 6 months at low refrigeration temperature. However,
cold storage is expensive compared to drying and drying becomes a low-cost alternative.
Milk fat can be transformed into powder form by spray drying. However, even in
dried form, some undesired changes such as fat oxidation and Maillard reaction
may occur in dairy powders. Through the microencapsulation technique, stable
and durable products can be obtained. In this study, the importance of converting
milk fat into powder form and cream powder production are explained, and
scientific studies on in the field of conversion of milk fat into powder are summarized.

Anahtar Kelimeler

Milk fat, Cream powder, Microencapsulation, Spray drying

Kaynakça

• [1] Fox, P.F., McGuffey, R.K., Shirley, J.E., Cogan, T.M. (2011). History of Dairy Science and Technology. Encyclopedia of Dairy Sciences (2. Edition), Edited by Fuquay, J.W., Fox, P.F., McSweeney, P.L.H. London, UK: Elsevier Academic Press.
• [2] Britz, T.J., Robinson, R.K. (2008). Advanced Dairy Science and Technology. Oxford, UK: Blackwell Publishing.
• [3] IDF (International Dairy Federation). (2012). The World Dairy Situation 2012. Bulletin of the International Dairy Federation, 458/2012. Brussels, Belgium: IDF.
• [4] Fox, P.F. (2011). History of Dairy Products and Processes. Encyclopedia of Dairy Sciences (2. Edition), Edited by Fuquay, J.W., Fox, P.F., McSweeney, P.L.H. London, UK: Elsevier Academic Press.
• [5] Sokhansanj, S., Jayas, D.S. (2006). Drying of Foodstuffs. Handbook of Industrial Drying (3. Edition). Edited by S.Mujumdar, A.S. Boca Raton, FL: CRC Press.
• [6] Skanderby, M., Westergaard, V., Partridge, A., Muir, D.D. (2009). Dried Milk Products. Dairy Powders and Concentrated Products, Edited by Tamime, A.Y. Oxford, UK: Blackwell Publishing.
• [7] Schuck, P. (2011). Milk Powder: Types and Manufacture. Encyclopedia of Dairy Sciences (2. Edition), Edited by Fuquay, J.W., Fox, P.F., McSweeney, P.L.H. London, UK: Elsevier Academic Press.
• [8] Kumar, P., Mishra, H.N. (2004). Yoghurt powder: A review of process technology, storage and utilization. Trans IChemE, Part C, Food and Bioproducts Processing, 82(C2), 133-142.
• [9] Havea, P., Baldwin, A.J., Carr, A.J. (2009). Specialised and Novel Powders. Dairy Powders and Concentrated Products, Edited by Tamime, A.Y. West Sussex, UK: Wiley-Blackwell.
• [10] Harper, W.H. (2011). Dairy Ingredients in Non-Dairy Foods. Encyclopedia of Dairy Sciences (2. Edition), Edited by Fuquay, J.W., Fox, P.F., McSweeney, P.L.H. London, UK: Elsevier Academic Press.
• [11] Chudy, S., Pikul, J., Rudzińska, M. (2015). Effects of storage on lipid oxidation in milk and egg mixed powder. Journal of Food and Nutrition Research, 54(1), 31-40.
• [12] Early, R. (1990). The use of high-fat and specialized milk powders. International Journal of Dairy Technology, 43(2), 53-56.
• [13] Moreau, D.L., Rosenberg, M. (1996). Oxidative stability of anhydrous milkfat microencapsulated in whey proteins. Journal of Food Science 61(1): 39-43.
• [14] Onwulata, C.I., Smith, P.W., Cooke, P.H., Holsinger, V.H. (1996). Particle structures of encapsulated milkfat powders. LWT - Food Science and Technology, 29(1-2), 163-172.
• [15] Danviriyakul, S., McClements, D.J., Nawar, W.W., Chinachoti, P. (2002). Physical stability of spray-dried milk fat emulsion as affected by emulsifiers and processing conditions. Journal of Food Science, 67(6), 2183-2189.
• [16] Strange, E.D., Konstance, R.P., Lu, D., Smith, P.W., Onwulata, C.I., Holsinger, V.H. (1997). Oxidative and functional stability during storage of butter oil encapsulated with sucrose or flour. Journal of Food Lipids, 4(4), 245-260.
• [17] Holsinger, V.H., McAloon, A.J., Onwulata, C.I., Smith, P.W. (2000). A cost analysis of encapsulated spray-dried milk fat. Journal of Dairy Science, 83(10), 2361-2365.
• [18] Konstance, R.P., Onwulata, C.I., Holsinger, V.H. (1995). Flow properties of spray-dried encapsulated butteroil. Journal of Food Science, 60(4), 841-844.
• [19] Onwulata, C.I. (2005). Single- and double-encapsulated butter oil powders. Encapsulated and Powdered Foods, Edited by Onwulata, C. Boca Raton, FL: CRC Press.
• [20] Schuck, P. (2009). Understanding the Factors Affecting Spray-dried Dairy Powder Properties and Behavior. In Dairy-derived Ingredients Food and Nutraceutical Uses Edited by Milena Corredig, Woodhead Publishing Limited, Abington Hall, Granta Park, Great Abington, Cambridge CB21 6AH, UK.
• [21] Oldfield, D., Singh, H. (2005). Functional Properties of Milk Powders. In Encapsulated and Powdered Foods, Edited by Onwulata C., Taylor and Francis Inc., 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742.
• [22] Codex Alimentarius. (2011). Codex Standard for Milk Powders and Cream Powder. Milk and Milk Products (2. Edition), Rome, Italy: FAO / WHO.
• [23] Türk Gıda Kodeksi. (2013). Gıda Kaktı Maddeleri Yönetmeliği. Resmi Gazete, Sayı: 28693. 30 Haziran 2013.
• [24] Herr, B., 2011. Types and Functions of Additives in Dairy Products. Encyclopedia of Dairy Sciences (2. Edition), Edited by Fuquay, J.W., Fox, P.F., McSweeney, P.L.H. London, UK: Elsevier Academic Press.
• [25] Hoffmann, W. (2011). Cream Products. Encyclopedia of Dairy Sciences (2. Edition), Edited by Fuquay, J.W., Fox, P.F., McSweeney, P.L.H. London, UK: Elsevier Academic Press.
• [26] Spreer, E. (1998). Milk and Dairy Product Technology. New York, USA: Marcel Dekker, Inc.
• [27] Smiddy, M.A., Kelly, A.L., Huppertz, T. (2009). Cream and Related Products. Advanced Dairy Chemistry, Dairy Fats and Related Products, Edited by Tamime, A.Y. West Sussex, UK: Wiley-Blackwell.
• [28] Rowe, M., Donaghy, J. (2011). Microbiological Aspects of Dairy Ingredients. Dairy Ingredients of Food Processing, Edited by Chandan, R.C., Kilara, A. West Sussex, UK: Wiley-Blackwell.
• [29] Chandan, R.C. (2011). Dairy Ingredients in Bakery, Snacks, Sauces, Dressings, Processed Meats, and Functional Foods. Dairy Ingredients of Food Processing, Edited by Chandan, R.C., Kilara, A. West Sussex, UK: Wiley-Blackwell.
• [30] Augustin, M.A., Clarke, P.T. (2008). Dry Milk Products. Dairy Processing and Quality Assurance, Edited by Chandan, R.C., Kilara, A., Shah, N.P. West Sussex, UK: Wiley-Blackwell.
• [31] Keogh, M.K. (2005). Spray-dried microencapsulated fat powders. Encapsulated and Powdered Foods, Edited by Onwulata, C. Boca Raton, FL: CRC Press.
• [32] da Silva, P.T., Fries, L.L.M., de Menezes, C.R., Holkem, A.T., Schwan, C.L., Wigmann, E.F., Bastos, J.O., da Silva, C.B. (2014). Microencapsulation: concepts, mechanisms, methods and some applications in food technology. Ciencia Rural, 44(7), 1304-1311.
• [33] Shahidi, F., Han, X.Q. (1993). Encapsulation of food ingredients. Critical Reviews in Food Science and Nutrition, 33(6), 501-547.
• [34] Drusch, S., Mannino, S. (2009). Patent-based review on industrial approaches for the microencapsulation of oils rich in polyunsaturated fatty acids, Trends in Food Science and Technology, 20(6), 237-244.
• [35] Matsuno, R., Adachi, S. (1993). Lipid encapsulation technology–techniques and application to food. Trends in Food Science and Technology, 4(8), 256-261.
• [36] Mahdavi, S.A., Jafari, S.M., Ghorbani, M., Assadpoor, E. (2014). Spray-drying microencapsulation of anthocyanins by natural biopolymers: A review. Drying Technology, 32(5), 509-518.
• [37] Onwulata, C.I., Holsinger, V.H. (1995). Thermal properties and moisture sorption isotherms of spray-dried encapsulated milkfat. Journal of Food Processing and Preservation, 19(1), 33-51.
• [38] Wehrle, K., Gallagher, E., Neville, D.P., Keogh, M.K., Arendt, E.K. (1999). Microencapsulated high-fat powders in biscuit production. Zeitschrift für Lebenmittel-Untersuchung und Forschung / A Food Research and Technology, 208(5), 388-393.
• [39] Estevinho, B.N., Rocha, F., Santos, L., Alves, A. (2013). Microencapsulation with chitosan by spray drying for industry applications – A review. Trends in Food Science and Technology, 31(2), 138-155.
• [40] Desai, K.G.H., Park, H.J. (2005). Recent developments in microencapsulation of food ingredients. Drying Technology, 23(7), 1361-1394.
• [41] Koç, M., Sakin, M., Kaymak-Ertekin, F. (2010). Mikroenkapsülasyon ve gıda teknolojisinde kullanımı. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 16(1), 77-86.
• [42] Kuang, S.S., Oliveira, J.C., Crean, A.M., 2010. Microencapsulation as a tool for incorporating bioactive ingredients into food, Critical Reviews in Food Science and Nutrition 50(10): 951-968.
• [43] Peker, H., Arslan, S. (2011). Mikroenkapsülasyon ve süt teknolojisinde kullanım alanları. Akademik Gıda, 9(6), 70-80.
• [44] Chronakis, I.S. (1998). On the molecular characteristics, compositional properties, and structural-functional mechanisms of maltodextrins: A review. Critical Reviews in Food Science and Nutrition, 38(7), 599-637.
• [45] Onwulata, C.I., Smith, P.W., Craig Jr, J.C., Holsinger, V.H., 1994. Physical properties of encapsulated spray-dried milkfat. Journal of Food Science 59(2): 316-320.
• [46] Foegeding, E.A., Davis, J.P., Doucet, D., McGuffey, M.K. (2002). Advances in modifying and understanding whey protein functionality. Trends in Food Science and Technology, 13(5), 151-159.
• [47] Kilara, A. (2008). Whey and whey products. Dairy Processing and Quality Assurance, Edited by Chandan, R.C., Kilara, A., Shah, N.P. Oxford, UK: Blackwell Publishing.
• [48] Huffman, M.L., Ferreira, L.B. (2011). Whey-based ingredients. Dairy Ingredients for Food Processing, Edited by Chandan, R.C., Kilara, A. Oxford, UK: Blackwell Publishing.
• [49] Onwulata, C.I., Smith, P.W., Holsinger, V.H. (1995). Flow and compaction of spray-dried powders of anhydrous butteroil and high melting milkfat encapsulated in disaccharides. Journal of Food Science, 60(4), 836-840.
• [50] Shivakumar, K.M., Chetana, R., Yella Reddy, S. (2012). Preparation and properties of encapsulated fat powders containing speciality fat and ω/PUFA-rich oils. International Journal of Food Properties, 15(2), 412-425.
• [51] Andersson, K., Lingnert, H. (1997). Influence of oxygen concentration on the storage stability of cream powder. LWT-Food Science and Technology, 30(2), 147-154.
• [52] Andersson, K., Lingnert, H. (1998). Influence of oxygen concentration on the flavour and chemical stability of cream powder. LWT-Food Science and Technology, 31(3), 245-251.
• [53] Andersson, K., Lingnert, H. (1998). Influence of oxygen concentration and light on the oxidative stability of cream powder. LWT-Food Science and Technology, 31(2), 169-176.
• [54] O’Brien, C.M., Grau, H., Neville, D.P., Keogh, M.K., Arendt, E.K. (2000). Functionality of microencapsulated high-fat powders in wheat bread. European Food Research and Technology, 212(1), 64-69.
• [55] Schrober, T.J., O’Brien, C.M., McCarthy, D., Darnedde, A., Arendt, E.K. (2003). Influence of gluten-free flour mixes and fat powders on the quality of gluten-free biscuits. European Food Research and Technology, 216(5), 369-376.
• [56] Collins, Y., McSweeney, P.L.H., Wilkinson, M.G. (2003). Lipolysis and free fatty acid catabolism in cheese: a review of current knowledge, International Dairy Journal, 13, 841-866.
• [57] Paez, R., Pensel, N., Sabbag, N., Taverna, M., Cuatrin, A., Zalazar, C. (2006). Changes in free fatty acid composition during storage of whole milk powder. International Journal of Dairy Technology, 59(4), 236-241.
• [58] Evers, J.M., Morris, A., Conaghan, E.F., Palfreyman, K.R. (2000). The BDI method – Part II: The effect of the whole milk powder manufacturing process on free fatty acid levels. The Australian Journal of Dairy Technology, 55(1), 37-39.
• [59] Kim, S.H., Chang, Y.H., Kwak, H.S. (2010). Physicochemical properties of reconstituted milk made from freeze-dried milk powder or spray-dried milk powder. Korean Journal for Food Science of Animal Resources, 30(1), 28-35.
• [60] Vignolles, M.L., Jeantet, R., Lopez, C., Schuck, P. (2007). Free fat, surface fat and dairy powders: Interactions between process and product. Lait, 87(3), 187-236.
• [61] Kim, E.H.J., Chen, X.D., Pearce, D. (2005). Melting characteristics of fat present on the surface of industrial spray-dried dairy powders. Colloids and Surfaces B: Biointerfaces, 42, 1-8.
• [62] Kelly, J., Kelly, P.M., Harrington, D. (2002). Influence of processing variables on the physicochemical properties of spray dried fat-based milk powders. Lait, 82(4), 401-412.
• [63] Keogh, K., Murray, C., Kelly, J., O’Kennedy, B. (2004). Effect of the particle size of spray-dried milk powder on some properties of chocolate. Lait, 84(4), 375-384.
• [64] Farkye, N. (2006). Significance of milk fat in milk powder. Advanced Dairy Chemistry, Volume-2, Lipids (3. Edition), Edited by Fox, P.F., McSweeney, P.L.H. New York, NY, USA: Springer.
• [65] Erbay, Z., Koca, N., Kaymak-Ertekin, F., Ucuncu, M. (2015). Optimization of spray drying process in cheese powder production. Food and Bioproducts Processing, 93, 156-165.
• [66] Kim, E.H.J., Chen, X.D., Pearce, D. (2009). Surface composition of industrial spray-dried milk powders. 2. Effects of spray drying conditions on the surface composition. Journal of Food Engineering, 94, 169-181.