Researchers Lütfi Öveçoğlu
Lütfi Öveçoğlu profile image
Lütfi Öveçoğlu
Publication 4 Review 0 CrossRef Cited 1
4 Publication
0 Review
1 CrossRef Cited

Institution

Publications

Effect of Ambient and Cryogenic Milling on the Microstructure and Properties of Tungsten Matrix Composites Fabricated by Activated Sintering
Authors: Özge Balcı , Duygu Ağaoğulları , Mehmet Suat Somer , M. Lütfi Öveçoğlu
Published: 2019 , Cumhuriyet Science Journal
DOI: 10.17776/csj.385724
FAVORITE 0 TOTAL DOWNLOAD COUNT 1163

0

1163

Effects of TiB2 and La2O3 Particle Reinforcements on the Tungsten Matrix Composites Fabricated by Mechanical Alloying and Activated Sintering
Authors: Duygu Ağaoğulları , Özge Balcı , Hasan Gökçe , Didem Ovalı, M. Lütfi Öveçoğlu
Published: 2019 , Academic Platform - Journal of Engineering and Science
DOI: 10.21541/apjes.410375
FAVORITE 0 TOTAL DOWNLOAD COUNT 1194

0

1194

Effect of La2O3 reinforcement and mechanical alloying on the microstructural and mechanical properties of pressureless sintered Al15Si2.5Cu0.5Mg composites
Authors: Emre Tekoğlu , Duygu Ağaoğulları , Hasan Gökçe , M. Lütfi Öveçoğlu
Published: 2018 , Journal of Balıkesir University Institute of Science and Technology
DOI: 10.25092/baunfbed.489675
FAVORITE 0 TOTAL DOWNLOAD COUNT 649

0

649

Autoclave processing and sintering of ZrB2-ZrO2 powders and investigation of microstructural and some mechanical properties of bulk products
Authors: Özge Balcı , Nazlı Akçamlı , Duygu Ağaoğulları , M. Lütfi Öveçoğlu , İsmail Duman
Published: 2017 , Journal of Boron
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 2517

0

2517

Articles published in
Academic Platform - Journal of Engineering and Science
Academic Platform - Journal of Engineering and Science
Cumhuriyet Science Journal
Cumhuriyet Science Journal
Journal of Balıkesir University Institute of Science and Technology
Journal of Balıkesir University Institute of Science and Technology
Journal of Boron
Journal of Boron
Editorship
ITU Journal of Metallurgy and Materials Engineering
ITU Journal of Metallurgy and Materials Engineering
Technical Editor , Co-Editor
Editorial Board Memberships
ITU Journal of Metallurgy and Materials Engineering
ITU Journal of Metallurgy and Materials Engineering

Publications

Effect of La2O3 reinforcement and mechanical alloying on the microstructural and mechanical properties of pressureless sintered Al15Si2.5Cu0.5Mg composites
Authors: Emre Tekoğlu , Duygu Ağaoğulları , Hasan Gökçe , M. Lütfi Öveçoğlu
Published: 2018 , Journal of Balıkesir University Institute of Science and Technology
DOI: 10.25092/baunfbed.489675
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 649

1

0

649

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.