Cilt: 7 Sayı: 1, 31.05.2024

Yıl: 2024

Makaleler

Kocaeli Journal of Science and Engineering (KOJOSE) is an international, peer-reviewed, multidisciplinary, digital, open access and bi-annual journal publishing original research papers and review articles in English. KOJOSE is managed by the Post Graduate School of Natural and Applied Sciences of Kocaeli University. It purposes to provide a forum for recent information on research, innovation and development in a wide variety of areas of science and engineering. There is no article submission, processing, or publication charge in KOJOSE since all expenses are covered by Kocaeli University. KOJOSE adopts Budapest Open Access Initiative Policy.

Kocaeli Journal of Science and Engineering (KOJOSE) publishes original research papers and review articles in the following fields of applied science, engineering, and technology:

Aeronautics and Astronautics
Architecture
Automotive Engineering
Biology
Biomedical Engineering
Chemistry and Chemical Engineering
Civil Engineering
Computer Science and Informatics
Earth Sciences
Electrical and Electronics Engineering
Energy Engineering
Environmental Engineering
Garden Plants
Industrial Engineering 

Maritime Transportation Engineering

Mathematics
Metallurgy and Materials Engineering
Mechanical Engineering
Physics
Occupational Health and Safety
Seafood



Kocaeli Journal of Science and Engineering (KOJOSE) publishes research and review papers written in English.

The research paper is an article reflecting the findings and results of original research, while the review paper is an article compiling an adequate number of articles, summarizing the present level of science or technology, and making an evaluation as well as a comparison of the findings of these articles.

Manuscripts should be submitted by one of the authors through the online submission system. The submitting (corresponding) author is responsible for the manuscript during submission and peer review processes.

The names of all authors should be entered into the system during the first submission. The names, ORCID numbers, and affiliations of all authors should also be indicated on the first page of the submitted manuscript.

All submissions should be accompanied by The Copyright Transfer Form containing the names of all authors and signed by the corresponding author.

Ethics approval is needed for studies on vulnerable populations, policies, confidential data, ethical business/marketing practices, clinical researches on human subjects, researches using animals, and retrospective subjects. Ethics committee approval should be stated together with the board name, date, and number in both the “Method” section of the manuscript as well as its last page. When submitting the manuscript, the Ethics Committee Approval file must also be uploaded onto the system.

Written permission must be obtained from the owners of other Copyright holders for the use of their materials such as photographs, figures, tables, etc.

All manuscripts submitted to KOJOSE are first assessed by the Editor to find out their suitability for the Journal. Suitable manuscripts are then scanned by the similarity software as described in the Anti-Plagiarism Policy section of the journal website. Appropriate manuscripts are sent to at least two expert reviewers to assess the scientific level of the paper. KOJOSE adopts a single-blind review system in which the reviewers’ identities remain anonymous to the authors. Manuscripts are expected to meet certain standards of scientific excellence to get published in the Journal.


Manuscript Submission Format


The manuscripts submitted to the Kocaeli Journal of Science and Engineering should be prepared according to the rules stated below.


1) Manuscripts should be in English written in a double-column format as a Microsoft Word document.


2) Please use Times New Roman font, 10 point size throughout the manuscript but TNR(11) and TNR(8) fonts must be used for section titles and abstract, respectively.


3) The text should be one-spaced, fully justified, with 15 mm margins on the left side, 20 mm margin right side, 25 mm margin on the top and bottom sides. 


4) All manuscript text except references and captions (of tables and figures) should be written with 1.15 line spacing. Line spacing in references and captions should be set 1.00.


5) Starting from the first page, place page numbers on the bottom center of each page.


6) Starting from the first page, number all the lines by using the line numbering function of MS word.


7) Please do not use any header/footer.


8) The maximum allowable number of words is 5000 for research papers and 10000 for review papers. The references are excluded from this limit.


9) The maximum allowable total figure and table number should not exceed 12 and 20 for research and review papers, respectively.


10) The title of the article should be concise, informative, and have no abbreviations.


11) The name(s) of the author(s), department name(s), name of the current institution(s), cities, postal address(es), countries, and ORCID numbers of the authors should be indicated after the title. The corresponding author should be indicated by an asterisk. The e-mail address of the corresponding author should also be provided.


12) An abstract should be provided for the paper. The abstract not exceeding 200 words is required. The aim of the study, materials/methods, main results and major conclusions should be briefly expressed in the abstract. The abstract should not contain any equations, references, or footnotes.


13) 4-6 keywords associated with the manuscript should be provided and sorted alphabetically


14) The manuscript should be divided into clearly defined and numbered sections with brief headings. Subsections can also be used. Sections and subsections should be numbered 1.1. (then 1.1.1., 1.1.2., ...), 1.2., etc. Each section or subsection heading should appear on its own separate line.


15) Following the abstract, the structure of the manuscript should be as follows: 


Introduction: State the purpose of the study and describe why it matters. Avoid an extensive literature review; just summarize background information only for specific aspects of the topic being addressed.


Material and methods: Describe in detail what was done to answer the question(s) posed in the introduction. It should include enough details and references to permit a full evaluation of your work or to repeat the experiments exactly as you have done them.


Results and Discussion: Describe the findings along with the interpretation of significant data. Tables and figures can usually be utilized in this section.


Conclusions: State the main conclusions of the study.


Conflict of Interests: All conflicts of interest should be declared. If there is not any conflict of interest, the content of this section can be arranged as shown in the template.


Acknowledgments: Acknowledgements should be expressed in a separate section before the references.


References: Please arrange this section as described below.


Appendices: If there is more than one appendix, they should be entitled as A, B, etc. Equations in appendices should have separate numbers: Eq. (1), Eq. (2), etc. Tables and figures in appendices should be numbered as Table 1 and Figure 1, etc.,


Declaration of Ethical Standards: If the study does not require Ethics Approval, the following declaration can be used:

“The author(s) of this article declares that the materials and methods used in this study do not require ethical committee permission and/or legal-special permission.”
Otherwise, please declare the board name granting ethics approval, approval date, and approval number.


16) Tables should have consecutive numbers and captions at the top in accordance with their appearance in the text.


17) Figures should have consecutive numbers and captions at the bottom in accordance with their appearance in the text. Size the illustrations close to the desired dimensions of the printed version. Please make sure that artwork files are in an acceptable format (TIFF or JPEG) and with the correct resolution (min. 300 dpi).


18) Captions should be justified left and ride sides of the figure or table. Locate the tables and figures close to the paragraph in which they are mentioned first. If one column is not wide enough for a table or figure, you can merge the columns as shown in the template


19) The text should have a citation of each figure and table. Letters in the figures should be large enough to be readily seen.


20) Abbreviations should be defined where they first appear in the text. The title of the paper should not have any abbreviation.


21) Equations should be fully justified. They should have consecutive equation numbers in parentheses aligned with the right margin as given in the template. Each equation must be cited in the text with the equation number.


22) Both tables and figures should be embedded in the text.


23) Each reference cited in the text should also be presented in the reference list.


Reference formatting: For citations within the text, use a citation number in a square bracket. A reference list at the end of the text with full details of all cited references is also required in accordance with the following examples. Also, all open access references must be clickable. These references should include a link that directs the reader to the contents of the reference when clicking on it.


Reference to a journal publication:

[1] Hosoz M., Direk M., 2006. Performance evaluation of an integrated automotive air conditioning and heat pump system. Energy Conversion and Management, 47, pp. 545‒559.


Reference to conference proceedings:

[2] Wilkinson R., 2009. Sociology as a marketing feast. Paper presented at the Australian Sociological Association, Monash University, Melbourne, Australia, 7-10 December, pp. 281–304.


[3] Hosoz M., Karabektas M., 2014. Comparative performance of an automotive air conditioning system using R1234yf and R134a. Paper presented at 13th International Conference on Sustainable Energy Technologies, Geneva, Switzerland, 25-28 August, Paper ID: SET2014-E40082.


Reference to a book:
[4] Moran M.J., Shapiro H.N., 2006. Fundamentals of Engineering Thermodynamics, 5th ed. John Wiley and Sons, West Sussex, England.


24) Line spacing, paragraph spacing, font size, indents, and all other spelling features in the manuscript must be as shown in the template. 


You can download the template from here.

Kocaeli Journal of Science and Engineering (KOJOSE) follows the guides and politics published by the Committee on Publication Ethics (COPE) for ethical rules and responsibilities of authors, journal editors, reviewers, and publisher.

The manuscripts submitted to KOJOSE must be original, must have not been published elsewhere, and must not be simultaneously considered in another journal. It is the responsibility of the submitting author to ensure that the publication of the paper has been approved by all co-authors. The manuscript should not contain any statements that are contrary to the law and will result in a violation of the rights. By submitting the manuscript, all authors acknowledge that the journal does not have any responsibility for the results and interpretations in it.

Ethics approval is needed for studies on vulnerable populations, policies, confidential data, ethical business/marketing practices, clinical research on human subjects, research using animals, and retrospective subjects. Ethics committee approval should be stated together with the board name, date, and number in both the “Method” section of the manuscript as well as its last page.

All manuscripts submitted to KOJOSE are first assessed by the Editor to find out their suitability for the Journal. Suitable manuscripts are then scanned by the similarity software as described in the Anti-Plagiarism Policy section of the journal website. Appropriate manuscripts are sent to at least two expert reviewers to assess the scientific level of the paper. KOJOSE adopts a single-blind review system in which the reviewers’ identities remain anonymous to the authors. Manuscripts are expected to meet certain standards of scientific excellence to get published in the Journal.

KOJOSE is an open-access journal publishing original research papers and review articles in English. It is published twice a year in May and December. In KOJOSE, the evaluation of the initial article submission is expected to take averagely three months. Authors can publish their articles in KOJOSE free of charge, and readers can also access the published articles with no charge. 

Authors can publish their articles in KOJOSE free of charge. There is no article submission, processing, or publication charge in KOJOSE. Readers can also access the published articles with no charge.