Doç. Dr. Hüseyin ARSLAN
Kahramanmaras Sütcü İmam University Science&Letter Faculty Physics Department 46100 Onikisubat Kahramanmaras/Turkiye Phone: +90 (344) 3001433 Fax : +90(344) 3001352 e-mail : arslan@ ksu.edu.tr
Ph.D : 2009 Kahramanmaraş Sütçüimam Universty, Natural Sciences Enst., Physics Dept. Kahramanmaraş /TÜRKİYE.TheThesis: Investigation of Transformation Temperatures and Transformation Hysteresis of Fe-Mn-Si Based Alloys with Experimental and ANN Methods. Supervisor : Prof. Dr. Ali DOGAN
M.Sc: 1994 Erciyes University, Natural Sciences Enst., Physics Dept. Kayseri/ TÜRKİYE Thesis : A Study of Spin-1 Ising Model in the Presence of the Magnetic Fields Due to the Dipole and Quadrupole Moments. Supervisor : Prof. Dr. Mustafa KESKİN
B.Sc: 1984 Radars and Operating Principles. Supervisor : Prof. Dr. Nail ÖZEK Lisans (B.Sc.): Department of Physics Education, Dicle University, Diyarbakır/TÜRKİYE
International Published Papers indexed by (SCI, SSCI, AHCI)
1. M.Keskin, H.Arslan, "Stable, Metastable and Unstable Solutions of a Spin-1 Ising System in the Presence of Magnetic Fields Due to the Dipole and Quadrupole Moments",Journal of Magnetism and Magnetic Materials146 (1995) L247-L250.
2. A. Dogan, H. Arslan, “Effect of ball-milling conditions on microstructure during production of Fe–20Mn–6Si–9Cr shape memory alloy powders by mechanical alloying” J Therm Anal Calorim., 109 (2012) 933-938. DOI 10.1007/s10973-011-1809-x
3. H. Arslan, A. Dogan, ve T. Dogan, “An Analytical Approach for Thermodynamic Properties of the Six Components Systems Ni–Cr–Co–Al–Mo–Ti and Their Subsystems” The Physics of Metals and Metallography, 2013, Vol. 114, No. 12, pp. 1053–1060. DOI: 10.1134/S0031918X13220018
4. H. Arslan “Analytical determination of partial and integral properties of the six components systems Ni–Cr–Co–Al–Mo–Ti and their subsystems” Physica B, 2014, Vol.438, pp.48–52. http://dx.doi.org/10.1016/j.physb.2013.12.046i
5. H. Arslan, A. Dogan ve T. Dogan, “Estimation of Excess energies and Activity Coefficients for the Penternary Ni-Cr-Co-Al-Mo System and its subsystems” The Physics of Metals and Metallography, 2015, Vol. 116, No.6, pp.544-551. DOI: 10.1134/S0031918X14060052.
6. Hüseyin Arslan “Determinations of enthalpy and partial molar enthalpy in the alloys Bi-Cd-Ga-In-Zn, Bi-Cd-Ga-Zn and Au-Cu-Sn” Materials Chemistry and Physics, 2015, Vol. 153, pp.384-389. DOI: 10.1016/j.matchemphys.2015.01.029
7. H. Arslan, A. Dogan, “An Analytical Investigation for Thermodynamic Properties of the Fe–Cr–Ni–Mg–O System” Russian Journal of Physical Chemistry A, 2015, Vol. 89, No. 2, pp. 180–189. DOI: 10.1134/S0036024415020028.
8. A. Dogan and H. Arslan, “Comparative Thermodynamic Prediction of Integral Properties of Six Component, Quaternary, and Ternary Systems” METALLURGICAL AND MATERIALS TRANSACTIONS A, 2015, Vol. 46A, pp. 3753–3760. DOI: 10.1007/s11661-015-2888-2.
9. Ali Dogan and Hüseyin Arslan, “Geometric modelling of viscosity 1 of copper-containing liquid alloys” Philosophical Magazine, 2016, Vol. 95, No.5, pp.459-472. DOI: http://dx.doi.org/10.1080/14786435.2015.1133938.
10. A. Dogan and H. Arslan, “Composition Dependences of Thermodynamical Properties Associated with Pb_Free Ternary, Quaternary, and Quinary Solder Systems” The Physics of Metals and Metallography, 2016, Vol. 117, No.5, pp.472-486. DOI: 10.1134/S0031918X16050045.
11. Hüseyin Arslan, Ali Dogan, “Thermodynamic Investigations on the Component Dependences of High-entropy Alloys“ Russian Journal of Physical Chemistry A, 2016, Vol. 90, No. 12, pp. 2339-2345. DOI: 10.1134/S0036024416120141.
12. Ali Dogan and Hüseyin Arslan, “An investigation on surface tensions of Pb-free solder materials” Philosophical Magazine, 2016, Vol. 96, No.27, pp. 2887-2901. DOI: http://dx.doi.org/10.1080/14786435.2016.1217361.
13. Ali Dogan and Hüseyin Arslan, “Surface tension estimation of high temperature melts of the binary alloys Ag–Au” Philosophical Magazine, 2017, Vol. 97, No.31, pp.2871-2887. DOI: https://doi.org/10.1080/14786435.2017.1356483.
14. Ali Dogan and Hüseyin Arslan, “Thermophysical properties of Cu–In–Sn liquid Pb free alloys: viscosity and surface tension” Philosophical Magazine, 2018, Vol. 98, No.1, pp.37-53. DOI:https://doi.org/10.1080/14786435.2017.1392053.
15. Ali Dogan and Hüseyin Arslan, “Calculation of the surface tension of liquid Ga-based alloys” Philosophical Magazine, 2018, Vol. 98, No.13, pp.1170-1185. DOI:https://doi.org/10.1080/14786435.2018.1431697.
16. Hüseyin Arslan and Ali Dogan, “Çok bileşenli kurşunsuz alaşımlara eşlik eden termodinamik özelliklerin Belirlenmesi-Prediction of thermodynamic properties associated with six component alloys, Pb-free quaternary and ternary alloys.” Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 2019, Vol. 34, No.2, pp.597-608. DOI:https://doi.org/10.17341/gazimmfd.416431.
17. Ali Dogan and Hüseyin Arslan, “Theoretical calculation of surface tension and its temperature coefficient associated with liquid Cu–Ti alloys.” Philosophical Magazine, 2018, Vol. 98, No.27, pp.2529-2542. https://doi.org/10.1080/14786435.2018.1492751.
18. Ali Dogan and Hüseyin Arslan, “ASSESSMENT OF THERMODYNAMIC PROPERTIES OF LEAD-FREE SOLDERİNG Co-Sb-Sn, Ag-In-Pd-Sn, and Ni-Cr-Co-Al-Mo-Ti-Cu alloys.” The Physics of Metals and Metallography, 2018, Vol. 119, No.10, pp.1032-1049. DOI: 10.1134/S0031918X18100046.
19. Ali Dogan and Hüseyin Arslan, “Thermodynamic description of the viscosity of liquid solder alloys with minor Co impurities.” Philosophical Magazine, 2019, Vol. 99, No.3, pp.267-283. DOI:10.1080/14786435.2018.1537530

20. Ali Dogan and Hüseyin Arslan, “Determination of surface tension of liquid ternary Ni–Cu–Fe and sub-binary alloys” Philosophical Magazine, 2019, Vol. 99, No.10, pp.1206-1224. DOI: 10.1080/14786435.2019.1576937
21. Ali Dogan and Hüseyin Arslan, “An Investigation of Influencing of Sb and Bi contents on Surface Tensions Associated with Pb-free Sn-Zn-Sb-Bi quaternary and Sub-quaternary Solder Alloys.” Philosophical Magazine, 2019, Vol. 99, No.15, pp.1825-1848. https://doi.org/10.1080/14786435.2019.1605215
22. Ali Dogan and Hüseyin Arslan, “Molar Volume Calculation of Molten Ag–Au–Cu and Cu–Ag–In Alloy Systems Using General Solution Model” Russian Journal of Physical Chemistry A, 2020, Vol. 94, No. 2, pp. 332-340. DOI:10.1134/S003602442002003X
23. Ali Dogan and Hüseyin Arslan, “Estimation of viscosity of alloys using Gibbs free energy of mixing and geometric model” Russian Journal of Physical Chemistry A, 2020, Vol. 95, No.XX, pp. XXX-XXX. Accepted Papper To be published.
Book Chapter
1. Hüseyin Arslan and Ali Dogan, “Surface Tension and Surface Tension Assessment of Ag-Au-Cu Ternary and Sub-Binary Alloy Systems.” 2019, Book Title: Hysteresis of Composites, Buplisher: IntechOpen, Open ACCESS DOI: 10.5772 / intechopen.84701
Papers published in the International Journal
1. M.Keskin, H.Arslan, “A Spin-1 Ising Model in the Presence of the Magnetic Fields Due to the Dipole and Quadrupole Moments" Tr. J. of Phys. 19 (1995) 408-415.
2. M.Keskin, H.Arslan,” Stable, Metastable and Unstable Solutions of a Spin-1 Ising System in the Presence of Magnetic Fields Due to the Dipole and Quadrupole Moments” Tr. J. of Phys. 20 (1996) 88-89.
3. A. Dogan, Y. Havvatoglu ve H. Arslan, “Rigorous version of ınfinitesimal deformation approach to the crystallography of fcc → bcc martensitic phase transformation observed in Fe- 31 wt % Ni and zirconia alloys” International Journal of Physical Sciences 7(20) (2012) 2806 –2811. DOI: 10.5897/IJPS12.101
4. Hüseyin Arslan “Structural Evolution Properties of Cu-25 wt %Sn Alloy During Ball Milling” Journal of Advanced Thermal Science Research, 2014, Vol.1,pp. 25-31. DOI: http://dx.doi.org/10.15377/2409-5826.2014.01.01.4.
Papers presented at the International Congress
1. M. Keskin, H. Arslan, “A Spin-1 Ising Model in the Presence of the Magnetic Fields Due to the Dipole and Quadrupole Moments” Edirne Int. Physics Congree (1993)
2. S M. Keskin, H. Arslan, “Stable, Metastable and Unstable Solutions of a Spin-1 Ising System in the Presence of the Magnetic Fields Due to the Dipole and Quadrupole Moments.
” İstanbul 2. Statistical Physics Days. Congree (1995).
3. Veli Kasumov, Sadik Sertkaya, Muzaffer Çakar, Adnan Küçükönder, Hüseyin Arslan “The ESR Investigation of Paramagnetic Intermediates of CO(II) Complex in Ziegler TypeCatalytic Systems.” İstanbul 35. IUPAC Congree (1995).
4. Hüseyin Arslan, Ali Dogan and Sümeyye Cesur, “Metal Bazlı Kompozit Malzemelerin Üretim Süreci ve Fiziksel Özelliklerinin İncelenmesi” ADIM FİZİK GÜNLERİ V, 21 – 23 NİSAN 2016, ESKİŞEHİR / TÜRKİYE.
5. Ali Dogan, Hüseyin Arslan and Fırat Dogan, “Çok Bileşenli Alaşım Sistemlerinde Gibbs Serbest Enerjisinin Yüksek Sıcaklıklarda Termodinamik Olarak İncelenmesi” ADIM FİZİK GÜNLERİ V, 21 – 23 NİSAN 2016, ESKİŞEHİR / TÜRKİYE.
6. Ali Dogan, Hüseyin Arslan, “Estimation of Thermodynamic Properties of Mo-based Thernary Alloys” Turkish Physical Society 33rd International Physics Congress. 06-10 Eylül 2017 Bodrum / TÜRKİYE.
7. Ali Dogan, Hüseyin Arslan, “A Brief Review of Surface Tension and Surface Tension Assesment of Ag-Au-CuTernary and Sub binary Alloy Systems” Turkish Physical Society 33rd International Physics Congress. 06-10 Eylül 2017 Bodrum / TÜRKİYE.
8. Ali Doğan, Hüseyin Arslan ve Haci Bayram İ̇şlek, “Ag-Au-Cu Sıvı Alaşımının Viskozitesinin Geometrik ve Fiziksel Modellerle İ̇ncelenmesi.” II. Uluslararası Multidisipliner Çalışmaları Kongresi / 2nd International Congress on Multidisciplinary Studies 4-5 Mayıs 2018, Adana Türkiye / 4th-5th May 2018, Adana-Turkey.
9. Ali Doğan, Hüseyin Arslan ve Haci Bayram İşlek, “Al-Cu-Si Sıvı Alaşımının Viskozitesinin Geometrik ve Fiziksel Modellerle İ̇ncelenmesi.” II. Uluslararası Multidisipliner Çalışmaları Kongresi / 2nd International Congress on Multidisciplinary Studies 4-5 Mayıs 2018, Adana Türkiye / 4th-5th May 2018, Adana-Turkey.
10. Hüseyin Arslan, Ali Doğan ve Musab Yavuz, “Sıvı Ag-Cu Alaşımlarının Viskozitesinin Tahmin Edilmesi.” II. Uluslararası Multidisipliner Çalışmaları Kongresi / 2nd International Congress on Multidisciplinary Studies 4-5 Mayıs 2018, Adana Türkiye / 4th-5th May 2018, Adana-Turkey.
11. Hüseyin Arslan, Ali Doğan ve Musab Yavuz, “Sıvı Ag-Cu Alaşımlarının Yüzey Geriliminin Tahmin Edilmesi.” II. Uluslararası Multidisipliner Çalışmaları Kongresi / 2nd International Congress on Multidisciplinary Studies 4-5 Mayıs 2018, Adana Türkiye / 4th-5th May 2018, Adana-Turkey.
12. Ali Dogan, Hüseyin Arslan, “ÇOKLU DOĞRUSAL REGRASYON METODUYLA Ni-Mn-Ga ESASLI ŞEKİL HAFIZALI ALAŞIMLARIN DÖNÜŞÜM SICAKLIKLARININ VE SICAKLIK HİSTEREZİSLERİNİN BELİRLENMESİ.” UMTEB III.Uluslararası Mesleki ve Teknik Bilimler Kongresi 21-22 Haziran 2018 Gaziantep-TÜRKİYE.
13. Ali Dogan, Hüseyin Arslan, “FE-MN-Sİ-BAZLI ŞEKİL HAFIZALI ALAŞIMLARIN MARTENSİTİK DÖNÜŞÜM SICAKLIKLARI VE SICAKLIK HİSTEREZİSLERİNİN, ÇOKLU LİNEER REGRESYON VE YAPAY SİNİR AĞLARI MODELLERİYLE HESAPLANMASI.” UMTEB III.Uluslararası Mesleki ve Teknik Bilimler Kongresi 21-22 Haziran 2018 Gaziantep-TÜRKİYE.
14. Hüseyin Arslan, “ALTIN VE ALÜMİNYUM BAZLI ÜÇ VE DÖRT BİLEŞENLİ ALAŞIMLARIN VİSKOZİTE DEĞERLERİNİN HESAPLANMASI.” ISADET I. (International Symposium on Advanced Engineering Technologies) 2-4 Mayıs 2019 Kahramanmaraş- TÜRKİYE.
15. Hüseyin Arslan, “YÜKSEK ENTROPİLİ ALAŞIMLARIN BİLEŞENLERE BAĞLILIKLARI.” ISADET I. (International Symposium on Advanced Engineering Technologies) 2-4 Mayıs 2019 Kahramanmaraş- TÜRKİYE.
16. Hüseyin Arslan, “İkili Metal Alaşımlı Nanoparçacıkların Yüzey Enerjisine Etkisi.” IKSAD (MIDDLE EAST INTERNATIONAL CONFERENCE ON CONTEMPORARY SCIENTIFIC STUDIES-II) September 19-22, 2019 Gaziantep - TÜRKİYE.
17. Hüseyin Arslan, “Çeşitli Modeller Kullanarak Au-Ag-Cu Alaşımının Viskozitesinin Tahmin Edilmesi.” IKSAD (MIDDLE EAST INTERNATIONAL CONFERENCE ON CONTEMPORARY SCIENTIFIC STUDIES-II) September 19-22, 2019 Gaziantep – TÜRKİYE.
18. Hüseyin Arslan, “DÖRTLÜ SIVI KARIŞIMLARIN FAZLALIK MOLAR HACİMLERİNİN FARKLI MODELLERLE İNCELENMESİ.” IKSAD (ISPEC 6 th INTERNATIONAL CONFERENCE ON ENGINEERING & NATURAL SCIENCES) January 24-26, 2020, SANLIURFA, TÜRKİYE.
19. Hüseyin Arslan, “DÖRT BILEŞENLI Al-Cu-Mg-Si ALAŞIM SISTEMININ VISKOZITESININ İNCELENMESI.” IKSAD (ISPEC 6 th INTERNATIONAL CONFERENCE ON ENGINEERING & NATURAL SCIENCES) January 24-26, 2020, SANLIURFA, TÜRKİYE.
Adminestred Thesis (Ms.)
1- Sümeyye CESUR, THE MANUFACTURING OF METAL-LİGNOSELÜLOZİK -BASED COMPOSITE MATERIALS. It is offered to K.S.Ü. Science Enstitute as a Ms. Thesis on 17.06.2016.
2- Musab Asil YAVUZ, Prediction of Some Thermophysical properties, such as Surface Tension and Viscosity, Ag-Cu liquid alloys. İt is continuing.