Researchers Gökhan Başar
avatar
Gökhan Başar Res. Assist. Osmaniye Korkut Ata Üniversitesi
Publication 11 Review 6 CrossRef Cited 28 TR Dizin Cited 9
11 Publication
6 Review
28 CrossRef Cited
9 TR Dizin Cited
0000-0002-9696-7579

Research Fields

Mechanical Engineering Resource Technologies Material Design and Behaviors Composite and Hybrid Materials Multiple Criteria Decision Making Optimization in Manufacturing

Institution

Osmaniye Korkut Ata Üniversitesi

Publications

Multi-Objective Optimization of Cutting Parameters for Polyethylene Thermoplastic Material by Integrating Data Envelopment Analysis and SWARA-Based CoCoSo Approach
Authors: Oğuzhan Der , Muhammed Ordu , Gökhan Başar
Published: 2024 , Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
DOI: 10.47495/okufbed.1338169
FAVORITE 0 TOTAL DOWNLOAD COUNT 283

0

283

Statistical Investigation of the Effect of CO2 Laser Cutting Parameters on Kerf Width and Heat Affected Zone in Thermoplastic Materials
Authors: Oğuzhan Der , Gökhan Başar , Muhammed Ordu
Published: 2023 , Journal of Materials and Mechatronics: A
DOI: 10.55546/jmm.1359453
FAVORITE 0 TOTAL DOWNLOAD COUNT 223

0

223

Optimization of Thrust Force with Taguchi Method and Estimation by Regression Analysis in Drilling of Composite Materials
Authors: Gökhan Başar , Yusuf Fedai, Hediye Kırlı Akın
Published: 2020 , Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
DOI: 10.21605/cukurovaummfd.869155
FAVORITE 0 TOTAL DOWNLOAD COUNT 748

0

748

Tepki yüzeyi metodolojisi kullanılarak nanokompozitin delinmesinde oluşan itme kuvvetinin modellenmesi ve analizi
Authors: Gökhan Başar , Hediye Kırlı Akın , Funda Kahraman
Published: 2020 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.648188
FAVORITE 0 TOTAL DOWNLOAD COUNT 866

0

866

Mathematical Modeling and Optimization of Milling Parameters in AA 5083 Aluminum Alloy
Authors: Gökhan Başar , Funda Kahraman , Ganime Tuğba Önder
Published: 2019 , European Mechanical Science
DOI: 10.26701/ems.537087
FAVORITE 0 TOTAL DOWNLOAD COUNT 668

0

668

Cu/Al levhaların sürtünme karıştırma kaynağında Taguchi metodu ile çekme mukavemeti ve sertlik için optimum kaynak parametrelerinin tahmini
Authors: Gökhan Başar , Selçuk Mıstıkoğlu
Published: 2019 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.570891
FAVORITE 0 TOTAL DOWNLOAD COUNT 1113

0

1113

ANFIS Modeling of Surface Roughness in Milling Operation of 316L Stainless Steels
Authors: Yusuf Fedai, Ali Ünüvar, Hediye Kırlı Akın , Gökhan Başar
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.466629
FAVORITE 0 TOTAL DOWNLOAD COUNT 1756

0

1756

Optimization of Cutting Parameters in Hole Machining Process by Using Multi-objective Taguchi Approach
Authors: Funda Kahraman , Gökhan Başar , Zülfü Koçoğlu, Emre Yeniyıl
Published: 2018 , Journal of Polytechnic
DOI: 10.2339/politeknik.385921
FAVORITE 0 TOTAL DOWNLOAD COUNT 2470

0

2470

Kolemanit ve Boraks Takviyeli Fren Balatalarının Sürtünme Performansı
Authors: Gökhan Başar , B. Barış Buldum , İlker Sugözü
Published: 2018 , El-Cezeri
DOI: 10.31202/ecjse.395957
FAVORITE 0 TOTAL DOWNLOAD COUNT 1784

0

1784

Bronz Esaslı Kompozit Sürtünme Malzemelerin Üç Nokta Eğme Mukavemetinin Taguchi Metodu ile Optimizasyonu
Authors: Gökhan Başar , Funda Kahraman , Hüsamettin Kuş
Published: 2018 , El-Cezeri
DOI: 10.31202/ecjse.391936
FAVORITE 0 TOTAL DOWNLOAD COUNT 1170

0

1170

The Effect of Colemanite Content on Friction-Wear Properties of the Bronze Based Brake Lining Material Reinforced with Fly Ash Fabricated by the HotPressing Method
Authors: Hüsamettin Kuş, Duran Altıparmak, Gökhan Başar
Published: 2016 , Journal of Polytechnic
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1500

0

1500

Articles published in
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
El-Cezeri
El-Cezeri
European Mechanical Science
European Mechanical Science
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Journal of Materials and Mechatronics: A
Journal of Materials and Mechatronics: A
Journal of Polytechnic
Journal of Polytechnic
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology

Reviews

European Mechanical Science
European Mechanical Science
International Journal of Automotive Science And Technology
International Journal of Automotive Science And Technology
Journal of Amasya University the Institute of Sciences and Technology
Journal of Amasya University the Institute of Sciences and Technology
Natural and Applied Sciences Journal
Natural and Applied Sciences Journal

Publications

Multi-Objective Optimization of Cutting Parameters for Polyethylene Thermoplastic Material by Integrating Data Envelopment Analysis and SWARA-Based CoCoSo Approach
Authors: Oğuzhan Der , Muhammed Ordu , Gökhan Başar
Published: 2024 , Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
DOI: 10.47495/okufbed.1338169
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 283

2

0

283

Statistical Investigation of the Effect of CO2 Laser Cutting Parameters on Kerf Width and Heat Affected Zone in Thermoplastic Materials
Authors: Oğuzhan Der , Gökhan Başar , Muhammed Ordu
Published: 2023 , Journal of Materials and Mechatronics: A
DOI: 10.55546/jmm.1359453
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 223

3

0

223

Optimization of Thrust Force with Taguchi Method and Estimation by Regression Analysis in Drilling of Composite Materials
Authors: Gökhan Başar , Yusuf Fedai, Hediye Kırlı Akın
Published: 2020 , Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
DOI: 10.21605/cukurovaummfd.869155
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 748

2

0

748

Tepki yüzeyi metodolojisi kullanılarak nanokompozitin delinmesinde oluşan itme kuvvetinin modellenmesi ve analizi
Authors: Gökhan Başar , Hediye Kırlı Akın , Funda Kahraman
Published: 2020 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.648188
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 866

1

0

866

Mathematical Modeling and Optimization of Milling Parameters in AA 5083 Aluminum Alloy
Authors: Gökhan Başar , Funda Kahraman , Ganime Tuğba Önder
Published: 2019 , European Mechanical Science
DOI: 10.26701/ems.537087
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 668

3

0

668

Cu/Al levhaların sürtünme karıştırma kaynağında Taguchi metodu ile çekme mukavemeti ve sertlik için optimum kaynak parametrelerinin tahmini
Authors: Gökhan Başar , Selçuk Mıstıkoğlu
Published: 2019 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.570891
CITED 5 FAVORITE 0 TOTAL DOWNLOAD COUNT 1113

5

0

1113

ANFIS Modeling of Surface Roughness in Milling Operation of 316L Stainless Steels
Authors: Yusuf Fedai, Ali Ünüvar, Hediye Kırlı Akın , Gökhan Başar
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.466629
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 1756

3

0

1756

Optimization of Cutting Parameters in Hole Machining Process by Using Multi-objective Taguchi Approach
Authors: Funda Kahraman , Gökhan Başar , Zülfü Koçoğlu, Emre Yeniyıl
Published: 2018 , Journal of Polytechnic
DOI: 10.2339/politeknik.385921
CITED 5 FAVORITE 0 TOTAL DOWNLOAD COUNT 2470

5

0

2470

Kolemanit ve Boraks Takviyeli Fren Balatalarının Sürtünme Performansı
Authors: Gökhan Başar , B. Barış Buldum , İlker Sugözü
Published: 2018 , El-Cezeri
DOI: 10.31202/ecjse.395957
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 1784

3

0

1784

Bronz Esaslı Kompozit Sürtünme Malzemelerin Üç Nokta Eğme Mukavemetinin Taguchi Metodu ile Optimizasyonu
Authors: Gökhan Başar , Funda Kahraman , Hüsamettin Kuş
Published: 2018 , El-Cezeri
DOI: 10.31202/ecjse.391936
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1170

1

0

1170

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods. : Click to get information about the DergiPark User Badge.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.