Volume: 12 Issue: 4 , 12/31/25

Year: 2025

Research Article

Gazi University Journal of Science and Technology A: Engineering and Innovation (GUJSA) journal publishes original and qualified research articles in all fields of engineering, technology and basic sciences. Technical notes, letters to the editor, discussions or case studies are excluded.

"Gazi University Journal of Science Part A: Engineering and Innovation (GUJSA)" is an open access journal and has adopted an Open Access Policy.

Innovative work, new methods, approaches or recent findings in engineering, technology and basic sciences with a balance of practice and theory are expected. Papers previously published in other journals are not accepted.

PLEASE VISIT REQUIRED FILES PAGE.

Submitted articles should be written in “MS Office Word” format in accordance with the “Article Writing Rules”. Articles submitted in other formats will not be accepted.

"Article Writing Rules"

"Manuscript Template"


The following FOUR (4) files must be uploaded while submitting an article to our journal.

The article should be embedded in this template (without author names). Articles uploaded without the template will not be accepted

The Title of the Article, Article Section, Abstract and Keywords, as well as the Contact Information (e-mail) of the Corresponding Author and the Names, Addresses and ORCID Numbers of all Authors should be included

Authors retain the copyright of their articles.

4. Similarity Reports (iThenticate)
Articles with a similarity rate of more than 20% (or 4% from a single reference) and 30% (including references, figure/table captions, article template) cannot be accepted. Authors should check the similarity rate with “iThenticate” when submitting the article to the journal and upload the “iThenticate” files to the system during submission. The same procedure should be followed after the revision of the article (before publication).

Publication Ethics and Malpractice Statement

A-Ethical Principles

Gazi University Journal of Science and Technology Section A: Engineering and Innovation is committed to comply with international ethical rules and COPE principles in the publication process. The journal applies double-blind refereeing and terminates publications with ethical violations. The editorial office may request data from the authors; if not submitted, the manuscript will be rejected. At least two positive referee reports are required for publication acceptance and the publication order is determined according to the date of acceptance. The copyright form for accepted articles must be signed by all authors. In case of ethical violations, the journal can be notified by e-mail.

B-Ethical Responsibilities of the Authors

Manuscripts will not be accepted in the following cases: incomplete author information, non-contributing authors, out-of-scope studies, plagiarism/unethical publishing, failure to indicate the source of funding, if any, copyright infringement, targeting specific individuals/institutions, conflict of interest, incomplete reporting standards, failure to submit requested data, duplicate/simultaneous publication, insufficient citations/references, significant errors. Articles with a pre-publication similarity rate (iThenticate) exceeding 20% (4% from a single source) and 30% excluding references are not accepted. Authors must submit iThenticate report.

C-Ethical Responsibilities of the Reviewers

Editors improve the quality of publications, protect the public interest, keep all records, work impartially and confidentially, and manage unethical situations. Before sending the manuscripts to the referees, the relevant editor checks that they comply with the spelling rules, format, scope of the journal, publication and ethical principles, scientific quality and originality.

D-Ethical Responsibilities of the Editor, Editor in Chief, Managing/Assistant Editors, Foreign Editor Advisory Board, Language/Technical Editors

Gazi University Journal of Science and Technology, Part A: Engineering and Innovation is a double blind peer-reviewed, internationally indexed and open access journal published 4 issues a year in English. There is no review/submission fee and the process is approximately 8 weeks. The article in the referee process can be withdrawn by the relevant author via DergiPark; requests from other authors are evaluated by the editor-in-chief. The article cannot be sent elsewhere before the process is completed.

To ensure ethical and objective practices, our editors are expected to follow established industry standards as well as the specific policies set by our journal and publisher. For additional guidance, please consult the COPE Short Guide to Ethical Editing.

Generative AI refers to artificial intelligence technologies capable of producing text, images, or other content in response to user inputs. Tools such as ChatGPT, DALL-E, and similar models fall under this category.

Article submission and all other processes in the GUJSA are free of charge.

Owner

Default avatar
Prof. Dr. Uğur ÜNAL GAZİ ÜNİVERSİTESİ, GAZİ EĞİTİM FAKÜLTESİ, TÜRKÇE VE SOSYAL BİLİMLER EĞİTİMİ BÖLÜMÜ

Publishing Manager

Fracture Mechanics, Materials Science and Technologies, Composite and Hybrid Materials, Material Production Technologies, Metals and Alloy Materials, Organic Semiconductors, Powder Metallurgy

Chief Editor

Default avatar
Prof. Dr. Sema BİLGE OCAK GAZİ ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ
Physical Sciences, Condensed Matter Physics

Chief Editor

Mineral Stratum and Geochemistry

Assistant Editors

Murat Bilen
Assoc. Prof. Dr. Murat BİLEN GAZİ ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, KİMYA MÜHENDİSLİĞİ BÖLÜMÜ
Chemical Sciences, Catalysis and Mechanisms of Reactions, Industrial Product Design, Engineering, Energy, Chemical Engineering, Separation Processes, Environmental and Sustainable Processes, Catalytic Activity, Materials Science and Technologies, Manufacturing and Service Systems, Supply Chains
Physical Sciences, Foundations of Quantum Mechanics, Quantum Technologies, Statistical Mechanics, Physical Combinatorics and Mathematical Aspects of Condensed Matter

Editorial Board

Reinforced Concrete Buildings, Earthquake Engineering, Numerical Modelization in Civil Engineering, Civil Construction Engineering
Condensed Matter Physics
Atilla Bıyıkoğlu
Prof. Dr. Atilla BIYIKOĞLU Gazi Üniversitesi, Mühendislik Fakültesi
Thermodynamics and Statistical Physics, Computational Methods in Fluid Flow, Heat and Mass Transfer (Incl. Computational Fluid Dynamics), Electrical Energy Generation (Incl. Renewables, Excl. Photovoltaics), Renewable Energy Resources , Energy Generation, Conversion and Storage (Excl. Chemical and Electrical), Automotive Combustion and Fuel Engineering, Heat Transfer in Automotive
Adem Tataroglu
Prof. Dr. Adem TATAROGLU GAZİ ÜNİVERSİTESİ, FEN FAKÜLTESİ
Condensed Matter Physics, Semiconductors
Adnan Sözen
Prof. Dr. Adnan SÖZEN GAZİ ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ
Energy Systems Engineering, Energy
Default avatar
Prof. Dr. Cevriye GENCER GAZİ ÜNİVERSİTESİ
Decision Support and Group Support Systems, Multiple Criteria Decision Making, Optimization in Manufacturing
Geological Sciences and Engineering, Mineralogy- Petrography, Isotope Geochemistry, Geochemistry (Other), Geochronology, Igneous and Metamorphic Petrology, Mineralogy and Crystallography, Volcanology
Engineering Electromagnetics, Antennas and Propagation
Plant Cell and Molecular Biology, Bioinformatics and Computational Biology, Genetics
H. Serdar Yücesu
Prof. Dr. H. Serdar YÜCESU GAZI UNIVERSITY, FACULTY OF TECHNOLOGY, DEPARTMENT OF AUTOMOTIVE ENGINEERING, AUTOMOTIVE ENGINEERING PR.
Technical, Vocational and Workplace Education, Development of Vocational Education , Internal Combustion Engines, Automotive Combustion and Fuel Engineering, Automotive Engineering (Other)
Default avatar
Prof. Dr. Metin GÜRÜ GAZİ ÜNİVERSİTESİ
Energy, Geothermal Energy Systems, Construction Materials, Chemical and Thermal Processes in Energy and Combustion, Materials Science and Technologies, Chemical Engineering (Other)
Default avatar
Prof. Dr. Nazife ASLAN ANKARA HACI BAYRAM VELİ ÜNİVERSİTESİ, POLATLI FEN-EDEBİYAT FAKÜLTESİ, KİMYA BÖLÜMÜ
Electroanalytical Chemistry, Electrochemistry, Nuclear Chemistry
Füsun Yalçın
Assoc. Prof. Dr. Füsun YALÇIN Akdeniz Universitesi, Fen Fakültesi
Mathematical Sciences, Applied Statistics, Applied Mathematics
Sukru Dursun
Prof. Dr. Sukru DURSUN Konya Technical University
Information and Computing Sciences, Biological Sciences, Ecology, Microbiology, Ecological Applications, Environmental Biogeochemistry, Geography Education, Gender, Sexuality and Education, Ecology, Sustainability and Energy, Quality Management in Construction and Environment, Environmental Engineering, Waste Management, Reduction, Reuse and Recycling, Air Pollution Modelling and Control
Fatih Öz
Prof. Dr. Fatih ÖZ Atatürk Üniversitesi
Food Sciences, Meat Technology, Food Chemistry and Food Sensory Science
Default avatar
Dr. Taha Alper YILMAZ GAZI UNIVERSITY
Material Design and Behaviors, Material Characterization, Metals and Alloy Materials, Powder Metallurgy, Materials Engineering (Other)
Fracture Mechanics, Mechanical Engineering, Machine Design and Machine Equipment, Material Design and Behaviors, Tribology, Nanotechnology
Default avatar
Prof. Dr. Hacer KARACAN GAZİ ÜNİVERSİTESİ
Human-Computer Interaction, Artificial Reality, Computer Software, Requirements Engineering
Murat Akın
Asst. Prof. Dr. Murat AKIN YILDIRIM BEYAZIT UNIVERSITY
Information and Computing Sciences, Machine Learning, Data Mining and Knowledge Discovery, Artificial Intelligence
Yunus Önal
Assoc. Prof. Dr. Yunus ÖNAL İnönü Üniversitesi Mühendislik Fakültesi Kimya Mühendisliği
Chemical Sciences, Physical Chemistry, Reaction Kinetics and Dynamics, Polymerisation Mechanisms, Solid and Hazardous Wastes, Energy, Separation Processes, Environmental and Sustainable Processes, Nanotechnology
Silver Güneş
Dr. Silver GÜNEŞ GAZİ ÜNİVERSİTESİ
Engineering, Electrochemical Energy Storage and Conversion, Catalytic Activity
Zafer Evis
Prof. Dr. Zafer EVİS MIDDLE EAST TECHNICAL UNIVERSITY
Inorganic Materials, Biomaterial , Composite and Hybrid Materials, Ceramics in Materials Engineering
Erdal Irmak
Prof. Dr. Erdal IRMAK GAZİ ÜNİVERSİTESİ-ANKARA
Electrical Engineering, Electrical Energy Transmission, Networks and Systems, Electrical Energy Generation (Incl. Renewables, Excl. Photovoltaics), Power Plants
Yasemin Leventeli
Assoc. Prof. Dr. Yasemin LEVENTELİ AKDENİZ ÜNİVERSİTESİ
Hydrogeology, Geology of Engineering, Applied Geology
Applied Mathematics (Other)
Çetin Çakanyıldırım
Prof. Dr. Çetin ÇAKANYILDIRIM HİTİT ÜNİVERSİTESİ
Energy, Catalytic Activity, Materials Science and Technologies
Yılmaz Şimşek
Prof. Dr. Yılmaz ŞİMŞEK AKDENİZ ÜNİVERSİTESİ
Algebra and Number Theory, Combinatorics and Discrete Mathematics (Excl. Physical Combinatorics), Real and Complex Functions (Incl. Several Variables)
Default avatar
Prof. Dr. Niyazi Uğur KOÇKAL AKDENİZ ÜNİVERSİTESİ
Construction Materials
Irem Kucukoglu
Assoc. Prof. Dr. Irem KUCUKOGLU ALANYA ALAADDIN KEYKUBAT UNIVERSITY, FACULTY OF ENGINEERING
Symbolic Calculation, Algebra and Number Theory, Combinatorics and Discrete Mathematics (Excl. Physical Combinatorics), Mathematical Methods and Special Functions

English Language Editors

Linguistics (Other)
Default avatar
Instructor Gizem Açelya AYKAN GAZİ ÜNİVERSİTESİ
English As A Second Language

Technical Editors

Fatih Uçar
Dr. Fatih UÇAR AKDENİZ ÜNİVERSİTESİ
Geological Sciences and Engineering, Applied Geology, Geophysics, Electrical and Electromagnetic Methods in Geophysics