Research Article
Aim & Scope
“ Journal of Polytechnic of Gazi University”, which includes both experimental and theoretical studies in basic engineering areas, prioritizes publication of articles on rapidly developing fields of engineering and aims to focus on interdisciplinary methods and technologies and to convey the latest scientific and technological developments in engineering science to researchers, engineers and related masses. Scientific studies submitted to the journal must not be in the evaluation phase for publishing elsewhere as published or oral or poster presentations.
“ Journal of Polytechnic of Gazi University” concentrates on original researches about engineering and technology. Original researches and scientific reviews in engineering and technology fields are considered for publication in this Journal. The publication languages of the journal are Turkish and English. Manuscripts previously published in another journal are not accepted. Practical and theoretical studies are appropriate for this Journal. A review article is expected to give in-depth information and satisfactory evaluation of a engineering subject or technologic development, supported with an extensive reference list. Also, Short communication notes may be published in this Journal. These notes include a new method or technique, which can be explained important conclusions of a investigation.
Author Guidelines
Journal of Polytechnic-Politeknik Dergisi accepts scientific original articles in Turkish or English in order to create scientific communication between scientists working in the fields of Science and Engineering.
Research Article: Studies reflecting the original research with its findings and results,
Review Article: Reviewing sufficient scientific articles and summarizing the subject at the level of information and technology at the present day, evaluating and comparing these findings,
Technical Note: Articles describing a new method or technique explaining the important findings of a research.
Copyright of all manuscripts must be filled out by all authors of the manuscript and submitted to the editor. Publications of the Authors that do not signed the Copyright Agreement Form are not processed. No add-ons can be made by the authors on the articles that were decided to be published.
Each article is sent to at least two referees in terms of form and content. The articles that are determined to be published in the journal are prepared for publication.
Preparation of Manuscripts
1. TEXT should be written in Times New Roman font and 12 pt, not exceeding 20 pages except for review articles including references and figures. Authors should state what kind of article his/her article is.
2. TITLE of the work should be written in Turkish and English, the first letter of which must be capital, and the title should be short and clear.
All the first degree titles in the text should be written in capital letters, the first letters of all the words in the second degree titles should be capitalized and the first word of the title should be in capital letters for the third and lower headings (all the headings and subheadings used in the text should be specified in parentheses. Articles in English should not include any brackets. All text must be in English)
3. ABSTRACT should be written in Turkish and English, not exceeding 200 words.
4. KEYWORDS: At least 3 maximum 5 keywords should be given in Turkish / English.
5. COORDINATION of the MANUSCRIPT: Generally covers the introduction, method, findings, conclusion and discussion, respectively.
6. REFERENCES: In the text [1], [2] etc. numbers should be numbered and written at the end of the text.
If the reference is an article: the first letter of the author's surname, authors’ name, the full title of the article in quotation, the name of the journal (if available international abbreviations), volume no: start and end page of the article, (year).
Example: Sözen A., Özbaş E., Menlik T., Cakir MT, Guru M. and Boran K., '' Improving the thermal performance of diffusion absorption with alumina nanofluids '', International Journal of Refrigeration, 44: 73 -80, (2014).
If the reference is a book: the first letter of the author's surname, author’s name, title of the book in quotes, the volume no, the editor, if any, the name of the publisher, the publication number, the place of publication, (year).
A section from the reference book: The first letter of the last name of the author of the section, author’s name, title of the section in quotation, the name of the book from which the department was taken, the name of the publisher, the place of publication, (year).
If the reference is a published thesis: Name of the author's surname, author’s name, title of the thesis, the type of the thesis (master, doctorate), the university and institute where it is presented, (year).
If the reference is a proceeding: the first letter of the author's surname, authors’ name, title of the paper in the quotation, the name of the congress, the place where it was made, the beginning and ending page of the proceeding, (year).
If the reference is a standard: the standard number, the name of the standard in quotation, (year).
7. TABLES & FIGURES: All images without charts (photographs, drawings, diagrams, graphs, maps, etc.) should be named as Figure. Each chart and figure should be placed in the text. All figures should be numbered consecutively within the text.
8. FORMULAS & UNITS: All formulas in the text should be written in equation format. Formulas (1), (2) should be given the sequence number. All units must be in the SI unit system.
9. NOMENCLATURE can be given at the end of the text before the REFERENCES.
10. ACKNOWLEDGEMENT: If people or institutions are to be acknowledged, they should be written in this section and given before the REFERENCES.
Ethical Principles and Publication Policy
Price Policy
Politeknik Dergisi makale gönderimi veya basım aşamasında herhangi bir ücret talep etmemektedir.
Indexes
Journal Boards
Owner
Auto-generated board - Please Edit This Title
Web
İhsan TOKTAŞ completed his undergraduate studies at Gazi University, Department of Mechanical Education, in the Design and Construction Education Program. He received his Master's and Ph.D. degrees from Gazi University, Institute of Science, in the Department of Mechanical Education.
Between 1993 and 2009, he worked as a research assistant; from 2009 to 2012, he served as an Assistant Professor in the Department of Mechanical Education, Division of Technical Drawing and Machine Design, at Gazi University, Faculty of Technical Education. From 2012 to 2019, he worked as an Assistant Professor in the Department of Mechanical Engineering at Ankara Yıldırım Beyazıt University, and between 2019 and 2021, he served as an Associate Professor. Since 2021, he has been working as an Associate Professor in the Department of Industrial Design at Ankara Yıldırım Beyazıt University. He has also worked as a visiting researcher at Syracuse University (New York, USA) and the University of Bedfordshire (London, UK).
İhsan TOKTAŞ conducts research in the areas of Industrial Design, Machine Design, Mechanisms, Gears, Finite Element Analysis, Conceptual Design, Computer-Aided Design, Artificial Intelligence, Neural Networks, Biomechanics, Product Design, Geometric Patterns from the Anatolian Seljuk and Early Ottoman Periods.
He currently serves as the Director of the Distance Education Application and Research Center and the Continuing Education Center. He is also the Head of the Department and Division of Industrial Design and acts as the Dean of the Faculty of Architecture and Fine Arts.
General Managing Editor
Editor-in-Chief
Editors
Assistant Editors
Editorial Assistant
Language Editor
Editorial Board
Editorial Advisory Board
Technical Responsible
Publication Ethics Committee
This work is licensed under Creative Commons Attribution-ShareAlike 4.0 International.