Turkish Journal of Agricultural Engineering Research (Turk J Agr Eng Res, TURKAGER) is an international open-access online, and peer double-blind reviewed journal. TURKAGER publishes the original English and Turkish research articles and a very limited number of review articles. There are no page charges for manuscript publishing in this journal. TURKAGER has an open access system and online journal published twice a year in June and December.
Turk J Agr Eng Res (TURKAGER) is a peer double-blind reviewed journal and an interdisciplinary journal concerned with all parts of Agricultural Engineering (Horticulture, Plant Protection, Biosystems Engineering, Field Crops, Agricultural Economics, Soil Science and Plant Nutrition, Aquaculture, Animal Science), Food Science and Technology, Biology, and Environment.
INSTRUCTION FOR AUTHORS (*)
(*): Please check Sample English Manuscript Template file as click to this address: https://dergipark.org.tr/en/download/journal-file/16272). For the title page, click on this address: https://dergipark.org.tr/en/download/journal-file/23849).
-The responsible author responsible for the manuscript must upload the copyright agreement form signed with the similarity report using the 'iThenticate Plagiarism Detection Software or Turnitin' for new manuscript submission to the journal.
-The plagiarism report (similarity report) of the submitted manuscript should be below 20%, except for the reference list.
-The manuscript text should be prepared on A4 size paper, leaving 2.5 cm blank spaces all four margins for each page. Each line of pages and each page should be numbered. The manuscript submitted should not be longer than 25 pages (excluding figures and tables).
The text manuscript of the manuscript should be written as Century font.
-Firstly, TITLE PAGE should be prepared for the article to be sent.
-In Turkish manuscript writing; do not forget to write the Turkish title and Turkish abstract. And also, in Figure and Table titles should be given as Turkish and English together.
TITLE
The title of the manuscript should be brief and informative. The title should be written a single line spacing and written as lower case letters, except the first letter of the title. The manuscript title of the manuscript should be written as Century font, 13 points.
ABSTRACT
The abstract should not exceed 250 words, it should be prepared as Century font, 10 points, and one a half line spacing. The abstract should be written as a single paragraph.
Keywords section should be contained 3-6 keywords and they should be written as Century font, single line spacing, 10 points. Keywords should be different from the words of the title of the article.
INTRODUCTION
The introduction section should be prepared as Century font 11 points and a second line spacing. The introduction section should be clear and concise. The introduction should clearly define the objectives of the study. In the introduction section, the existing problem must be explained, and the previous studies, especially the most recent publications, should be given.
MATERIALS and METHODS
Materials and Methods section should be prepared as Century font 11 points and a second line spacing. In this section, all the procedures (materials, analytical methods, and statistical analyses) should clearly be explained.
RESULTS and DISCUSSION
Results and Discussion section should be prepared as Century font 11 points and a second line spacing. The findings and results of the study should be discussed with consideration by the previous works of literature in the Results and discussion section. Tables and/or figures should be presented in this section. The title of tables and/or figures should be given as a second line spacing and numbered sequentially.
Figures and Tables should be given with a title and numbered consecutively. Tables and figures should not exceed 16 x 23 cm. Figures should have a high resolution and grayscale (For example: a minimum resolution of 600dpi in jpeg format).
Units: SI units should be used for all units of measurement in the text. '/' sign should not be used in unit representations (For example: (km h-1; l s-1 rather than km/h; l/s) A space should be left between units and a single space should be left between the number and the unit (For example; cal g-1 ˚C- 1; 1 kg m-1 h-2 ). For decimal fractions, a period should be used. (2.54 rather than 2,54). In the definitions of percentage, angle, second and minute, no space should be left between the number and the unit. (For example: 20%, 40°, 55'', 15').
Formulas and Equations: Number each formula should be numbered, using the word mathematical processor, with a reference number at the end in parentheses. Formulas should be given as “Equation” and numbered in the text (For example: Equation 1).
Abbreviations and symbols: Abbreviations and symbols should be given in parentheses if necessary. Abbreviations should not be used in the article title or subtitles. In the definitions given for statistical significance in the text, ‘P’ values or ‘p<0.01’ symbols should be used.
CONCLUSION
The importance of the results and contribution to the science of the results should be emphasized in this section. This section should be prepared as Century font 11 points and a second line spacing. The conclusion section may be included the recommendations. The conclusion should not include the same sentences in the text or abstract.
ACKNOWLEDGMENT (Optional)
In the Acknowledgment section, the grants, the funds, the persons and organizations contributed to the research should be written. This section should be prepared as Century font 11 points and a second line spacing.
REFERENCES
In this section, references should be written in alphabetical and chronological order. References should be prepared as Century font 9 points and one a half line spacing. In English prepared manuscripts, the thesis references in different languages (except English) must be referred to by an English translation. In the text, for citation with one author, surname and the year of publication should be written (Mohsenin, 1980). For citation with two authors, ‘and’ should be used between the surnames of authors (Razavi and Parvar, 2007). For citation with three or more authors, the first author’s surname should be followed ‘et al.’ (Eren et al., 2010). For the same author/s, if there is more than one reference in the same year, then ‘a, b’ letters should be added in alphabetical order these references (Altuntas et al., 2018a).
References should be listed as given below:
Journal article:
Altuntas E, Ozturk B and Kalyoncu HI (2018). Bioactive compounds and physico-mechanical attributes of fruit and stone of cherry laurel (Prunus laurocerasus) harvested at different maturity stages. Acta Scientiarum Polonorum Hortorum Cultus, 17(6): 75-84.
Book:
Mohsenin, NN (1980). Physical properties of plant and animal materials. Gordon & Breach Science Publishers, New York.
Chapter of book:
Weiss EA (2000). Safflower. In: Oilseed Crops, Blackwell Sci. Ltd., Victoria, Australia.
Standard Book:
ASAE (1999). ASAE Standards. D497.4 MAR99: Agricultural Machinery Management Data. pp. 350-357 ASAE 2950 Niles Rd., St. Joseph, MI, 49085-9659, USA.
Thesis:
Asiltürk M (2010). The effects of the different soil tillage systems on soil properties and tuber yield in potato production. Master thesis, Gaziosmanpasa University, Graduate School of Natural and Applied Science, Department of Agricultural Machinery, p. 91, Tokat-Türkiye (In Turkish).
Proceedings:
Acaroğlu M (2006). Comparison energy balances in energy production from solid and biodiesel. 23th National Congress of Agricultural Mechanization, pp. 103-108. 6-8 Eylül 2006. Çanakkale-Turkey (in Turkish).
Internet source:
CABI (2017). Capsicum annuum (bell pepper). https://www.cabi.org/isc/datasheet/15784 (01/06/2020).
• Fee Policy: Turkish Journal of Agricultural Engineering Research (TURKAGER) does not charge any application, publication, and subscription fees.
• Turkish Journal of Agricultural Engineering Research is a peer double-blind reviewed journal and an interdisciplinary journal concerned with all parts of Agricultural Engineering (Horticulture, Plant Protection, Biosystems Engineering, Field Crops, Agricultural Economics, Soil Science and Plant Nutrition, Aquaculture, Animal Science), Food Science and Technology, Biology and Environment. It publishes the original Turkish and English research articles and a very limited number of review articles. The journal also publishes a limited number of articles by the members of the journal's editorial board. TURKAGER publishes its issues twice a year in June and December.
• Licensing and Copyright Transfer: The articles in the Turkish Journal of Agricultural Engineering Research are open access articles and the articles are licensed under a Creative Commons Attribution 4.0 International License (CC-BY-NC-4.0)(https://creativecommons.org/licenses/by-nc/4.0/deed.en). This journal is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Except for commercial purposes, users are allowed to read, download, copy, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author.
Turkish Journal of Agricultural Engineering Research (TURKAGER) obtains approval from the authors for the copyright of the articles to be published. The corresponding author must ensure that the submitted article has not been published in a similar form elsewhere and that the article is original and it has not to be sent elsewhere for publication. By signing this form, all authors of the article agree to the terms of the copyright transfer agreement. It is obligatory to fill out the copyright form and submit it to the journal system during the submission of the article (https://dergipark.org.tr/en/download/journal-file/16500).
• Privacy Statement: All personal information in the Turkish Journal of Agricultural Engineering Research (TURKAGER) journal system is used for scientific purposes and is not shared with third parties.
Archiving: All articles published in the Turkish Journal of Agricultural Engineering Research are stored on NATIONAL LIBRARY servers (https://ederlemevg.mkutup.gov.tr/logineydes.net) in pdf format.
Turkish Journal of Agricultural Engineering Research (TURKAGER) does not charge any application, publication, or subscription fees.
International peer double-blind reviewed journal