avatar
Gürcan Samtaş Prof. Dr. DÜZCE ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, MEKATRONİK MÜHENDİSLİĞİ BÖLÜMÜ
Publication 11 Review 28 CrossRef Cited 15 TR Dizin Cited 7
11 Publication
28 Review
15 CrossRef Cited
7 TR Dizin Cited
0000-0002-4111-7059

Research Fields

Mechanical Engineering Optimization Techniques in Mechanical Engineering Manufacturing Processes and Technologies (Excl. Textiles)

Institution

DÜZCE ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, MEKATRONİK MÜHENDİSLİĞİ BÖLÜMÜ

Publications

GGG40 Dökme Demirin Kriyojenik ve Kriyojenik İşlem Görmemiş Kesici Uçlarla Frezelenmesinde Kesme Sıcaklık Değerlerinin Taguchi ve Yapay Sinir Ağı Algoritmaları ile Tahmini ve Kesme Parametrelerinin Etkilerinin İncelenmesi
Authors: Gürcan Samtaş
Published: 2025 , Makina Tasarım ve İmalat Dergisi
DOI: 10.56193/matim.1618497
FAVORITE 0 TOTAL DOWNLOAD COUNT 365

0

365

Evaluation of Cutting Temperature and Optimization in Milling of GGG60 Cast Iron
Authors: Raşit Düzce , Gürcan Samtaş
Published: 2024 , Journal of Innovative Science and Engineering
DOI: 10.38088/jise.1195520
FAVORITE 0 TOTAL DOWNLOAD COUNT 1255

0

1255

Drilling Vanadis 4E with Coated Drills; Examination of Wear, Surface Roughness, and Chip Formation
Authors: Salih Korucu , Gürkan Soy , Gürcan Samtaş
Published: 2023 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.1173170
FAVORITE 0 TOTAL DOWNLOAD COUNT 718

0

718

Optimization of Cutting Tool Wear When Milling 6061-T651 Aluminum Alloy with Coated Inserts
Authors: Berat Serhat Bektaş , Gürcan Samtaş
Published: 2022 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.971025
FAVORITE 0 TOTAL DOWNLOAD COUNT 1041

0

1041

Kritik Metan Yoğunluğu Tespit Robotu Prototip Tasarımı ve Üretimi
Authors: Oğuzhan Şenel , Gürcan Samtaş
Published: 2022 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1053777
FAVORITE 0 TOTAL DOWNLOAD COUNT 1187

0

1187

Orta ve İleri Düzey Robotik Kodlama Eğitimleri için İnternet Odaklı Sensör Kartı Tasarım ve İmalatı
Authors: Samed Kaya , Gürcan Samtaş
Published: 2021 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1022237
FAVORITE 0 TOTAL DOWNLOAD COUNT 1249

0

1249

GG25 Dökme Demirin Frezelenmesinde Kesme Parametrelerinin Kesme Sıcaklığı Üzerine Etkisi ve Optimizasyonu
Authors: Raşit Düzce , Gürcan Samtaş
Published: 2021 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1019186
FAVORITE 0 TOTAL DOWNLOAD COUNT 2673

0

2673

The effect of cutting parameters on wear, surface roughness and chip formation in drilling of Vanadis 4E steel with uncoated drill bits
Authors: Salih Korucu , Gürcan Samtaş
Published: 2021 , Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
DOI: 10.21205/deufmd.2021236923
FAVORITE 0 TOTAL DOWNLOAD COUNT 1032

0

1032

Comparison of Vegetable Hydraulic Fluid Production and Performance with Hydraulic Oil
Authors: Gürcan Samtaş , Salih Korucu
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.436211
FAVORITE 0 TOTAL DOWNLOAD COUNT 4511

0

4511

The Optimization of Cutting Parameters Using Taguchi Method in Milling of Tempered Aluminum 5754 Alloy
Authors: Gürcan Samtaş , Salih Korucu
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.423795
FAVORITE 0 TOTAL DOWNLOAD COUNT 2026

0

2026

Development of Vegetable Based a Hydraulic Fluid
Authors: Gürcan Samtaş
Published: 2017 , Duzce University Journal of Science and Technology
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 5898

0

5898

Articles published in
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
Journal of Innovative Science and Engineering
Journal of Innovative Science and Engineering
Makina Tasarım ve İmalat Dergisi
Makina Tasarım ve İmalat Dergisi
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications

Reviews

Afyon Kocatepe University Journal of Science and Engineering
Afyon Kocatepe University Journal of Science and Engineering
Bilecik Seyh Edebali University Journal of Science
Bilecik Seyh Edebali University Journal of Science
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Celal Bayar University Journal of Science
Celal Bayar University Journal of Science
Demiryolu Mühendisliği
Demiryolu Mühendisliği
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
International Journal of Engineering Technology and Applied Science
International Journal of Engineering Technology and Applied Science
Journal of Information Technologies
Journal of Information Technologies
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications

Publications

Drilling Vanadis 4E with Coated Drills; Examination of Wear, Surface Roughness, and Chip Formation
Authors: Salih Korucu , Gürkan Soy , Gürcan Samtaş
Published: 2023 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.1173170
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 718

1

0

718

Optimization of Cutting Tool Wear When Milling 6061-T651 Aluminum Alloy with Coated Inserts
Authors: Berat Serhat Bektaş , Gürcan Samtaş
Published: 2022 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.971025
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1041

1

0

1041

GG25 Dökme Demirin Frezelenmesinde Kesme Parametrelerinin Kesme Sıcaklığı Üzerine Etkisi ve Optimizasyonu
Authors: Raşit Düzce , Gürcan Samtaş
Published: 2021 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1019186
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 2673

3

0

2673

The effect of cutting parameters on wear, surface roughness and chip formation in drilling of Vanadis 4E steel with uncoated drill bits
Authors: Salih Korucu , Gürcan Samtaş
Published: 2021 , Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
DOI: 10.21205/deufmd.2021236923
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1032

2

0

1032

The Optimization of Cutting Parameters Using Taguchi Method in Milling of Tempered Aluminum 5754 Alloy
Authors: Gürcan Samtaş , Salih Korucu
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.423795
CITED 8 FAVORITE 0 TOTAL DOWNLOAD COUNT 2026

8

0

2026

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods. : Click to get information about the DergiPark User Badge.