Ahsanollah
Beglarigale
,
Çağlar
Yalçınkaya
,
Halit Yazıcı
-
Archive
record_not_found
record_not_found
Articles
Latest Articles
Latest Articles
Most Cited Articles
Most Downloaded Articles
Most Viewed Articles
-
-
Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying methodAykut Canakci , Fatih Erdemir , Temel Varol , Serdar Özkaya , Ramazan Dalmış -
July 27, 2014 Page 15-22
-
Effect of bark flour on the mechanical properties of HDPE compositesNihat Sami Çetin , Nilgül Özmen , Nasır Narlıoğlu , Vedat Çavuş -
July 27, 2014 Page 23-32
-
A study of organo-modified clay type on pet-clay based nanocomposite propertiesSinem Yelkovan , Demet Yılmaz , Kasım Aksoy -
July 27, 2014 Page 33-46
-
Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloyingC. Nazik , N. Tarakcioglu , A. Canakci , T. Varol , S. Ozkaya -
July 27, 2014 Page 47-53
-
-
Effects of manufacturing defects on thermoformed product qualityOlcay Ekşi , Ertuğrul Selçuk Erdoğan -
July 27, 2014 Page 61-68
-
Optimization of hot plate welding parameters of glass fibered reinforced Polyamide 6 (PA6 GF15) composite material by Taguchi methodUmut Kocatüfek , Çınar Yeni , Aydın Ülker , Sami Sayer , Uğur Özdemir -
July 27, 2014 Page 69-85
-
Research for the spall effect after ballistic impact with finite element method
July 27, 2014 Page 87-96
-
The effect of metakaolin and end type of steel fiber on fiber-SIFCON matrix bond characteristicsÇağlar Yalçınkaya , Ahsanollah Beglarigale , Halit Yazıcı -
July 27, 2014 Page 97-105
-
The investigation of desired product properties of polycaprolactone-hydroxy apatite composites for tissue engineering applicationsYelda Küçükgöksel , Serap Cesur -
July 27, 2014 Page 107-119
-
Electrospinning of nanofibrous polycaprolactone (PCL) and collagen-blended polycaprolactone for wound dressing and tissue engineeringBegüm Zeybek , Mert Duman , Aylin Şendemir Ürkmez -
June 1, 2014 Page 121-134
-
Autoclaved reactive powder concrete: the effects of steel micro-fibers and silica fume dosage on the mechanical propertiesAhsanollah Beglarigale , Çağlar Yalçınkaya , Halit Yazıcı -
July 27, 2014 Page 7-14
-
Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying methodAykut Canakci , Fatih Erdemir , Temel Varol , Serdar Özkaya , Ramazan Dalmış -
July 27, 2014 Page 15-22
-
Effect of bark flour on the mechanical properties of HDPE compositesNihat Sami Çetin , Nilgül Özmen , Nasır Narlıoğlu , Vedat Çavuş -
July 27, 2014 Page 23-32
-
A study of organo-modified clay type on pet-clay based nanocomposite propertiesSinem Yelkovan , Demet Yılmaz , Kasım Aksoy -
July 27, 2014 Page 33-46
-
Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloyingC. Nazik , N. Tarakcioglu , A. Canakci , T. Varol , S. Ozkaya -
July 27, 2014 Page 47-53
-
-
Effects of manufacturing defects on thermoformed product qualityOlcay Ekşi , Ertuğrul Selçuk Erdoğan -
July 27, 2014 Page 61-68
-
Optimization of hot plate welding parameters of glass fibered reinforced Polyamide 6 (PA6 GF15) composite material by Taguchi methodUmut Kocatüfek , Çınar Yeni , Aydın Ülker , Sami Sayer , Uğur Özdemir -
July 27, 2014 Page 69-85
-
Research for the spall effect after ballistic impact with finite element method
July 27, 2014 Page 87-96
-
The effect of metakaolin and end type of steel fiber on fiber-SIFCON matrix bond characteristicsÇağlar Yalçınkaya , Ahsanollah Beglarigale , Halit Yazıcı -
July 27, 2014 Page 97-105
-
Development of Al-Si-Fe/Rice husk ash particulate composites synthesis by double stir casting methodVictor Sunday Aigbodion -
March 27, 2016 Page 187-197
-
Mathematical modelling of the Eddy current and its application to the material examinationsMurat Vural -
March 27, 2016 Page 111-121
-
Niobium boride coating on the surface of AISI 1010 by a duplex treatmentS. Serdar Pazarlıoğlu , Özkan Kon , Şaduman Şen , Uğur Şen -
March 27, 2016 Page 199-204
-
Effect of chloride ion concentration, spraying time and pH values on corrosion behavior of friction stir welded AZ61A magnesium alloy welds in salt fog environmentsA. Dhanapal , S. Rajendra Boopathy , V. Balasubramanian -
March 27, 2016 Page 147-167
-
Optimization of the heterogeneous photo Fenton degradation of a model pollutant, benzyl alcohol using UV/ZnO processManohar Shanthi , Elias Ginish , Duraisamy Rajamanickam -
March 27, 2016 Page 123-136
-
Empirical analysis of limit of desulphurization of iron ore based on multi-factorial process variablesC.I. Nwoye , S.O. Nwakpa , V.S. Aigbodion , P.C. Agu and F. Asuke -
March 27, 2016 Page 169-186
-
Water absorption characteristics of polyester matrix composites reinforced with oil palm ash and oil palm fibreK.K. Alaneme , S.R. Oke , J.A. Omotoyinbo -
March 27, 2016 Page 109-120
-
-
3D Bio-Cad modeling of human mandible and fabrication by rapid-prototyping technologyMustafa Ay , Tinaz Kubat , Cagri Delilbasi , Bulent Ekici , Huseyin Emir Yuzbasioglu , Selim Hartomacioglu -
March 27, 2016 Page 135-145
-
Role of nanofiller additions on mechanical and dry sliding wear behavior of epoxy nanocompositesB. Suresha , B.l. Ravishankar , L. Sukanya -
March 27, 2016 Page 79-94
-
Application of spacer fabrics in composite productionDiren Mecit , Arzu Marmaralı -
June 1, 2012 Page 71-78
-
Mathematical modelling of the Eddy current and its application to the material examinationsMurat Vural -
March 27, 2016 Page 111-121
-
Analysis of tube end forming process using Taguchi design of experimentsL. Venugopal , M.j. Davidson , N. Selvaraj -
March 27, 2016 Page 137-145
-
Effects of manufacturing defects on thermoformed product qualityOlcay Ekşi , Ertuğrul Selçuk Erdoğan -
July 27, 2014 Page 61-68
-
Banana fiber and pet bottles waste reinforced polymer compositesAyşe Betül Yıldız , Kerim Çetinkaya -
June 1, 2012 Page 29-34
-
Optimization of hot plate welding parameters of glass fibered reinforced Polyamide 6 (PA6 GF15) composite material by Taguchi methodUmut Kocatüfek , Çınar Yeni , Aydın Ülker , Sami Sayer , Uğur Özdemir -
July 27, 2014 Page 69-85
-
A study of organo-modified clay type on pet-clay based nanocomposite propertiesSinem Yelkovan , Demet Yılmaz , Kasım Aksoy -
July 27, 2014 Page 33-46
-
Electrospinning of nanofibrous polycaprolactone (PCL) and collagen-blended polycaprolactone for wound dressing and tissue engineeringBegüm Zeybek , Mert Duman , Aylin Şendemir Ürkmez -
June 1, 2014 Page 121-134
-
Production of banana / glass fiber bio–composite profile and its bending strengthSevgi Hoyur , Kerim Çetinkaya -
June 1, 2012 Page 43-49
-
Study of drilling of multi-material (CFRP/Al) using Taguchi and statistical techniquesVijayan Krishnaraj , Redouane Zitoune , Francis Collombet -
March 27, 2016 Page 95-109
-
Effects of manufacturing defects on thermoformed product qualityOlcay Ekşi , Ertuğrul Selçuk Erdoğan -
July 27, 2014 Page 61-68
-
Electrospinning of nanofibrous polycaprolactone (PCL) and collagen-blended polycaprolactone for wound dressing and tissue engineeringBegüm Zeybek , Mert Duman , Aylin Şendemir Ürkmez -
June 1, 2014 Page 121-134
-
Synthesis, characterization and optical properties of ZnO-CuO-Al2O3 semiconducting films on glass substrates by sol-gel techniqueErdal Çelik , Funda Öztoprak , M. Faruk Ebeoğlugil , İşıl Birlik , Recep Yiğit , Metin Tanoğlu And Hasan Aslan - , Hasan Aslan
March 27, 2016 Page 147-172
-
Autoclaved reactive powder concrete: the effects of steel micro-fibers and silica fume dosage on the mechanical propertiesAhsanollah Beglarigale , Çağlar Yalçınkaya , Halit Yazıcı -
July 27, 2014 Page 7-14
-
A study of organo-modified clay type on pet-clay based nanocomposite propertiesSinem Yelkovan , Demet Yılmaz , Kasım Aksoy -
July 27, 2014 Page 33-46
-
The effect of metakaolin and end type of steel fiber on fiber-SIFCON matrix bond characteristicsÇağlar Yalçınkaya , Ahsanollah Beglarigale , Halit Yazıcı -
July 27, 2014 Page 97-105
-
Effect of bark flour on the mechanical properties of HDPE compositesNihat Sami Çetin , Nilgül Özmen , Nasır Narlıoğlu , Vedat Çavuş -
July 27, 2014 Page 23-32
-
Optimization of hot plate welding parameters of glass fibered reinforced Polyamide 6 (PA6 GF15) composite material by Taguchi methodUmut Kocatüfek , Çınar Yeni , Aydın Ülker , Sami Sayer , Uğur Özdemir -
July 27, 2014 Page 69-85
-
Research for the spall effect after ballistic impact with finite element method
July 27, 2014 Page 87-96
-
Add To My Library
Journal Information
ISSN
2147-2785
Founded
2015
Publisher
Usak University
Coordinator of Scientific Publishing
Prof. Dr.
Ersan Ersoy
bdk@usak.edu.tr