Researchers Remzi Varol
Remzi Varol profile image
Remzi Varol Prof. Dr. It is not affiliated with an institution
Publication 14 Review 17 CrossRef Cited 7
14 Publication
17 Review
7 CrossRef Cited

Research Fields

Materials Science and Technologies

Institution

It is not affiliated with an institution

Publications

Dielektrik Bariyer Deşarj (DBD) Ozon Reaktörü Tasarımı ve Prototip İmalatı
Authors: İhsan Yürekli , Remzi Varol
Published: 2023 , Yekarum
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 153

0

153

Toz Metalurjisi Yöntemiyle Üretilmiş 6061 Al Matrisli B4C Takviyeli Kompozit Malzemelerin Radyasyon Absorbsiyon Özelliklerinin İncelenmesi
Authors: Elif Dicle Turşucular , Remzi Varol
Published: 2023 , Journal of Technical Sciences
DOI: 10.35354/tbed.1260061
FAVORITE 0 TOTAL DOWNLOAD COUNT 387

0

387

Shot Peening Effect on Reduced Graphene Oxide-based AA1070 Alloys Produced by Stir Casting Technique
Authors: İremnur Bülbül , Remzi Varol , Mehmet Fahri Saraç
Published: 2022 , Journal of Advanced Research in Natural and Applied Sciences
DOI: 10.28979/jarnas.1091422
FAVORITE 0 TOTAL DOWNLOAD COUNT 264

0

264

Mechanical Characterization of 3D Printable Nanoclay Reinforced Polymer Structures by Stereolithography
Authors: Mehmet Saraç , Merve Mert, İremnur Bülbül, İsmail Aktitiz, Berrin Saygı Yalçın, Remzı Varol
Published: 2019 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.555398
FAVORITE 0 TOTAL DOWNLOAD COUNT 886

0

886

Investigation of Mechanical Properties 3D Printable Fumed Silica Added Photo-Curable Polymers
Authors: Mehmet Saraç , Aslı Oranlı, İsmail Aktitiz, Berrin Saygı Yalçın, Remzi Varol
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.555185
FAVORITE 0 TOTAL DOWNLOAD COUNT 1508

0

1508

COMPARISON OF IMPACT PROPERTIES OF RECYCLED AND COMMERCIALLY AVAILABLE PM TITAMIUM ALLOYS
Authors: Mustafa Ustundag , Remzi Varol
Published: 2019 , Journal of Engineering Sciences and Design
DOI: 10.21923/jesd.461882
FAVORITE 0 TOTAL DOWNLOAD COUNT 906

0

906

TM Titanyum Alaşımlarına Sinter-HIP Yönteminin Uygulanması
Authors: Mustafa Üstündağ , Remzi Varol
Published: 2019 , Harran University Journal of Engineering
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 797

0

797

Grade 2 ve Grade 5 Titanyum Tozlarının Sıkıştırılabilme Karakteristikleri Üzerinde Yağlayıcı Etkisinin Araştırılması
Authors: Mustafa Üstündağ , Remzi Varol
Published: 2018 , Harran University Journal of Engineering
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1355

0

1355

AA2014 VE ELEMENTEL Al VE Cu TOZLARI KULLANILARAK T/M PARÇA İMALATI ŞARTLARININ DENEYSEL ARAŞTIRILMASI
Authors: Khawlah Noori Mahmood Al-obaıdı, Remzi Varol
Published: 2018 , Journal of Engineering Sciences and Design
DOI: 10.21923/jesd.428183
FAVORITE 0 TOTAL DOWNLOAD COUNT 873

0

873

INVESTIGATION ON THE COMPACTABLE CONDITIONS OF TI POWDERS PRE-ALLOYED TI6AL4V AND TI(CP)
Authors: Muqdad Naser M. Al-dulaımı, Remzi Varol
Published: 2018 , Journal of Engineering Sciences and Design
DOI: 10.21923/jesd.365213
FAVORITE 0 TOTAL DOWNLOAD COUNT 1070

0

1070

THE EFFECT OF SHOT PEENİNG ON GRAİN SİZE OF AA2024 ALUMİNİUM ALLOY
Authors: Zehra Alkan , Remzi Varol , Ramazan Selver
Published: 2017 , Soma Vocational School Technical Sciences Journal
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 931

0

931

CAM ELYAF TAKVİYELİ EPOKSİ KOMPOZİT MALZEMELERİN EĞİLME YORULMA DAVRANIŞININ BELİRLENMESİ
Authors: Ümran Esendemir , Remzi Varol
Published: 2017 , Soma Vocational School Technical Sciences Journal
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 2082

0

2082

Alüminyum Alaşımlarında Bilyeli Dövmenin Elektrik İletkenliği Üzerine Etkisi
Authors: Zehra Alkan , Remzi Varol , Ramazan Selver
Published: 2016 , Süleyman Demirel University Journal of Natural and Applied Sciences
DOI: 10.19113/sdufbed.44875
FAVORITE 0 TOTAL DOWNLOAD COUNT 1763

0

1763

Bilyeli Dövme Uygulanmış AA1050 Alüminyum Malzemenin Metalografik İncelenmesi
Authors: Zehra Alkan , Remzi Varol , Ramazan Selver
Published: 2016 , Süleyman Demirel University Journal of Natural and Applied Sciences
DOI: 10.19113/sdufbed.12415
FAVORITE 0 TOTAL DOWNLOAD COUNT 1748

0

1748

Articles published in
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
Harran University Journal of Engineering
Harran University Journal of Engineering
Journal of Advanced Research in Natural and Applied Sciences
Journal of Advanced Research in Natural and Applied Sciences
Journal of Engineering Sciences and Design
Journal of Engineering Sciences and Design
Journal of Technical Sciences
Journal of Technical Sciences
Journal of the Institute of Science and Technology
Journal of the Institute of Science and Technology
Soma Vocational School Technical Sciences Journal
Soma Vocational School Technical Sciences Journal
Süleyman Demirel University Journal of Natural and Applied Sciences
Süleyman Demirel University Journal of Natural and Applied Sciences
Yekarum
Yekarum

Reviews

Fırat University Journal of Engineering Science
Fırat University Journal of Engineering Science
Harran University Journal of Engineering
Harran University Journal of Engineering
Journal of Engineering Sciences and Design
Journal of Engineering Sciences and Design
Journal of Polytechnic
Journal of Polytechnic
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Süleyman Demirel University Faculty of Arts and Science Journal of Science
Süleyman Demirel University Faculty of Arts and Science Journal of Science
Süleyman Demirel University Journal of Natural and Applied Sciences
Süleyman Demirel University Journal of Natural and Applied Sciences
The International Journal of Materials and Engineering Technology
The International Journal of Materials and Engineering Technology

Publications

Mechanical Characterization of 3D Printable Nanoclay Reinforced Polymer Structures by Stereolithography
Authors: Mehmet Saraç , Merve Mert, İremnur Bülbül, İsmail Aktitiz, Berrin Saygı Yalçın, Remzı Varol
Published: 2019 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.555398
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 886

2

0

886

Investigation of Mechanical Properties 3D Printable Fumed Silica Added Photo-Curable Polymers
Authors: Mehmet Saraç , Aslı Oranlı, İsmail Aktitiz, Berrin Saygı Yalçın, Remzi Varol
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.555185
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1508

1

0

1508

COMPARISON OF IMPACT PROPERTIES OF RECYCLED AND COMMERCIALLY AVAILABLE PM TITAMIUM ALLOYS
Authors: Mustafa Ustundag , Remzi Varol
Published: 2019 , Journal of Engineering Sciences and Design
DOI: 10.21923/jesd.461882
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 906

1

0

906

AA2014 VE ELEMENTEL Al VE Cu TOZLARI KULLANILARAK T/M PARÇA İMALATI ŞARTLARININ DENEYSEL ARAŞTIRILMASI
Authors: Khawlah Noori Mahmood Al-obaıdı, Remzi Varol
Published: 2018 , Journal of Engineering Sciences and Design
DOI: 10.21923/jesd.428183
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 873

1

0

873

Bilyeli Dövme Uygulanmış AA1050 Alüminyum Malzemenin Metalografik İncelenmesi
Authors: Zehra Alkan , Remzi Varol , Ramazan Selver
Published: 2016 , Süleyman Demirel University Journal of Natural and Applied Sciences
DOI: 10.19113/sdufbed.12415
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1748

2

0

1748

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.