Mehmet Fahri Saraç Assoc. Prof. Dr. SÜLEYMAN DEMİREL ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, OTOMOTİV MÜHENDİSLİĞİ BÖLÜMÜ

Publication 13 Review 26 CrossRef Cited 11

13 Publication

26 Review

11 CrossRef Cited

Follow Following Edit My Profile

Followers

Following

Summary
Publications
Peer Review
Cited

Research Fields

Materials Science and Technologies Material Characterization Nanomaterials

Institution

SÜLEYMAN DEMİREL ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, OTOMOTİV MÜHENDİSLİĞİ BÖLÜMÜ

Publications

INVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF ST-37 AND STRENX-960 STEELS BY A-TIG WELDING METHOD

Authors: Emre Kasım , Mehmet Fahri Saraç , İlyas Genç

Published: 2025 , Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University

DOI: 10.31796/ogummf.1542071

FAVORITE 0 TOTAL DOWNLOAD COUNT 244

0

FAVORITE

244

TOTAL DOWNLOAD COUNT

EVALUATION OF THE STRENGTH PROPERTIES OF A CLAY SOIL STABILIZED WITH FLY ASH AND BIOPOLYMER USING THE TAGUCHI TECHNIQUE

Authors: Mehmet Fatih Yazıcı , Mehmet Fahri Saraç , Çağla Aydın , Melce Begüm Polat , Can Mustafa Çalık , Caner Özen

Published: 2025 , Kahramanmaras Sutcu Imam University Journal of Engineering Sciences

DOI: 10.17780/ksujes.1519704

FAVORITE 0 TOTAL DOWNLOAD COUNT 376

0

FAVORITE

376

TOTAL DOWNLOAD COUNT

Investigation of Microstructure and Wear Behaviors of AZ91 Alloy Under Different Heat Treatments

Authors: Gökçen Akgün , Dinçer Buran , Mehmet Fahri Saraç

Published: 2023 , Erzincan University Journal of Science and Technology

DOI: 10.18185/erzifbed.1254273

FAVORITE 0 TOTAL DOWNLOAD COUNT 385

0

FAVORITE

385

TOTAL DOWNLOAD COUNT

EFFECT OF ELECTRICAL RESISTANCE AND CORROSION PROPERTIES ON GRAFEN ADDED AA1050 METAL MATRIX COMPOSITES

Authors: Jülide Hazal Türkcan , Oguz Kaan Ozdemir , Mehmet Fahri Saraç

Published: 2022 , Journal of Engineering Sciences and Design

DOI: 10.21923/jesd.1105487

FAVORITE 0 TOTAL DOWNLOAD COUNT 676

0

FAVORITE

676

TOTAL DOWNLOAD COUNT

Shot Peening Effect on Reduced Graphene Oxide-based AA1070 Alloys Produced by Stir Casting Technique

Authors: İremnur Bülbül , Remzi Varol , Mehmet Fahri Saraç

Published: 2022 , Journal of Advanced Research in Natural and Applied Sciences

DOI: 10.28979/jarnas.1091422

FAVORITE 0 TOTAL DOWNLOAD COUNT 444

0

FAVORITE

444

TOTAL DOWNLOAD COUNT

IN-SITU SYNTHESIS OF 3D-PRINTED MAGNETIC NANOPARTICLES EMBEDDED PHOTOPOLYMERS

Authors: Mehmet Fahri Saraç

Published: 2021 , International Journal of 3D Printing Technologies and Digital Industry

DOI: 10.46519/ij3dptdi.949271

FAVORITE 0 TOTAL DOWNLOAD COUNT 730

0

FAVORITE

730

TOTAL DOWNLOAD COUNT

The effect of functional nanoclay addition on the mechanical properties and impact behavior of hybrid composites

Authors: Ümran Esendemir , Recep Şimşek , Mehmet Fahri Saraç

Published: 2021 , Nigde Omer Halisdemir University Journal of Engineering Sciences

DOI: 10.28948/ngumuh.786231

FAVORITE 0 TOTAL DOWNLOAD COUNT 1758

0

FAVORITE

1758

TOTAL DOWNLOAD COUNT

Effect of Nanoclay Addition on Impact Behavior on Hybrid Composite Structures

Authors: Ümran Esendemir , Recep Şimşek, Mehmet Fahri Saraç

Published: 2020 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.661094

FAVORITE 0 TOTAL DOWNLOAD COUNT 801

0

FAVORITE

801

TOTAL DOWNLOAD COUNT

Titanyum Karbür (TiC) Takviyeli Epoksi ile Güçlendirilmiş Hibrit Kompozitlerin Çarpma Davranışının Deneysel ve Sayısal İncelenmesi

Authors: Mustafa Reşit Usal , Mustafa Taşlıdere , Mehmet Fahri Saraç

Published: 2020 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.606515

FAVORITE 0 TOTAL DOWNLOAD COUNT 1674

0

FAVORITE

1674

TOTAL DOWNLOAD COUNT

Mechanical Characterization of 3D Printable Nanoclay Reinforced Polymer Structures by Stereolithography

Authors: Mehmet Saraç , Merve Mert, İremnur Bülbül, İsmail Aktitiz, Berrin Saygı Yalçın, Remzı Varol

Published: 2019 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.555398

FAVORITE 0 TOTAL DOWNLOAD COUNT 1229

0

FAVORITE

1229

TOTAL DOWNLOAD COUNT

Investigation of Mechanical Properties 3D Printable Fumed Silica Added Photo-Curable Polymers

Authors: Mehmet Saraç , Aslı Oranlı, İsmail Aktitiz, Berrin Saygı Yalçın, Remzi Varol

Published: 2019 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.555185

FAVORITE 0 TOTAL DOWNLOAD COUNT 1882

0

FAVORITE

1882

TOTAL DOWNLOAD COUNT

RHEOLOGICAL BEHAVIOR OF PARTICLE SIZE DEPENDENT FUMED SILICA BASED SHEAR THICKENING FLUIDS

Authors: Mehmet Fahri Saraç , Seçil Peker, Kerim Yapıcı

Published: 2018 , Journal of Engineering Sciences and Design

DOI: 10.21923/jesd.447357

FAVORITE 0 TOTAL DOWNLOAD COUNT 1726

0

FAVORITE

1726

TOTAL DOWNLOAD COUNT

Investigation of Thermal and Mechanical Properties of Aramid Fiber Reinforced Thermoplastic Polyurethane Elastomer Composites

Authors: Mehmet Fahri Saraç , Dinçer Buran , Murat Koru

Published: 2018 , Süleyman Demirel University Journal of Natural and Applied Sciences

DOI: -

FAVORITE 0 TOTAL DOWNLOAD COUNT 2610

0

FAVORITE

2610

TOTAL DOWNLOAD COUNT

Articles published in

Duzce University Journal of Science and Technology

Erzincan University Journal of Science and Technology

International Journal of 3D Printing Technologies and Digital Industry

Journal of Advanced Research in Natural and Applied Sciences

Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University

Journal of Engineering Sciences and Design

Journal of the Institute of Science and Technology

Kahramanmaras Sutcu Imam University Journal of Engineering Sciences

Nigde Omer Halisdemir University Journal of Engineering Sciences

Süleyman Demirel University Journal of Natural and Applied Sciences

Reviews

Duzce University Journal of Science and Technology

Engineering Perspective

Gazi University Journal of Science

Harran University Journal of Engineering

International Journal of 3D Printing Technologies and Digital Industry

Journal of Advanced Research in Natural and Applied Sciences

Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University

Journal of Engineering Sciences and Design

Süleyman Demirel University Faculty of Arts and Science Journal of Science

Teknik Bilimler Dergisi

Uludağ University Journal of The Faculty of Engineering

Publications

Investigation of Microstructure and Wear Behaviors of AZ91 Alloy Under Different Heat Treatments

Authors: Gökçen Akgün , Dinçer Buran , Mehmet Fahri Saraç

Published: 2023 , Erzincan University Journal of Science and Technology

DOI: 10.18185/erzifbed.1254273

CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 385

1

CITED

0

FAVORITE

385

TOTAL DOWNLOAD COUNT

IN-SITU SYNTHESIS OF 3D-PRINTED MAGNETIC NANOPARTICLES EMBEDDED PHOTOPOLYMERS

Authors: Mehmet Fahri Saraç

Published: 2021 , International Journal of 3D Printing Technologies and Digital Industry

DOI: 10.46519/ij3dptdi.949271

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 730

2

CITED

0

FAVORITE

730

TOTAL DOWNLOAD COUNT

The effect of functional nanoclay addition on the mechanical properties and impact behavior of hybrid composites

Authors: Ümran Esendemir , Recep Şimşek , Mehmet Fahri Saraç

Published: 2021 , Nigde Omer Halisdemir University Journal of Engineering Sciences

DOI: 10.28948/ngumuh.786231

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1758

2

CITED

0

FAVORITE

1758

TOTAL DOWNLOAD COUNT

Effect of Nanoclay Addition on Impact Behavior on Hybrid Composite Structures

Authors: Ümran Esendemir , Recep Şimşek, Mehmet Fahri Saraç

Published: 2020 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.661094

CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 801

1

CITED

0

FAVORITE

801

TOTAL DOWNLOAD COUNT

Titanyum Karbür (TiC) Takviyeli Epoksi ile Güçlendirilmiş Hibrit Kompozitlerin Çarpma Davranışının Deneysel ve Sayısal İncelenmesi

Authors: Mustafa Reşit Usal , Mustafa Taşlıdere , Mehmet Fahri Saraç

Published: 2020 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.606515

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1674

2

CITED

0

FAVORITE

1674

TOTAL DOWNLOAD COUNT

Mechanical Characterization of 3D Printable Nanoclay Reinforced Polymer Structures by Stereolithography

Authors: Mehmet Saraç , Merve Mert, İremnur Bülbül, İsmail Aktitiz, Berrin Saygı Yalçın, Remzı Varol

Published: 2019 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.555398

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1229

2

CITED

0

FAVORITE

1229

TOTAL DOWNLOAD COUNT

Investigation of Mechanical Properties 3D Printable Fumed Silica Added Photo-Curable Polymers

Authors: Mehmet Saraç , Aslı Oranlı, İsmail Aktitiz, Berrin Saygı Yalçın, Remzi Varol

Published: 2019 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.555185

CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1882

1

CITED

0

FAVORITE

1882

TOTAL DOWNLOAD COUNT

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.

Interactive Guide Tool

If you want to see the panel introduction, you can click Start Tour.

DergiPark is ranked number 1 by academic community in reaching knowledge in Türkiye.

Quick Links

Journals
Subjects
Training and How-to Videos
FAQ
Contact
KVKK
Our Mobile Applications

Our Mobile Applications

Türkçe // English //