Researchers Berkay Ergene
Berkay Ergene profile image
Berkay Ergene Assoc. Prof. Dr. PAMUKKALE UNIVERSITY
Publication 18 Review 22 CrossRef Cited 48 TR Dizin Cited 14
18 Publication
22 Review
48 CrossRef Cited
14 TR Dizin Cited
0000-0001-6145-1970

Research Fields

Finite Element Analysis Mechanical Engineering Solid Mechanics Material Design and Behaviors Composite and Hybrid Materials CAD/CAM Systems Manufacturing Processes and Technologies (Excl. Textiles)

Institution

PAMUKKALE UNIVERSITY

Publications

Investigation of Spraying Systems Used in Smart Agriculture Applications
Authors: Beyza Sunar , Bekir Yalçın , Berkay Ergene , Ali Önal
Published: 2024 , International Journal of Engineering Technology and Applied Science
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 170

0

170

Statistical Evaluation of the Screw Pull Out Forces of PLA Parts Manufactured by Fused Deposition Modeling
Authors: Ahmet Murat Pinar , Berkay Ergene , Gökmen Atlıhan , Ahmet Arif Mağatlı , Fırat Kaya , Burak Karahan , Mehmet Emir Nişancı
Published: 2023 , Gazi Journal of Engineering Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 235

0

235

An Experimental Effort on Impact Properties of Polylactic Acid Samples Manufactured by Additive Manufacturing
Authors: Çağın Bolat , Berkay Ergene
Published: 2023 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.1075259
FAVORITE 0 TOTAL DOWNLOAD COUNT 240

0

240

Simulation of Fused Deposition Modeling of Glass Fiber Reinforced ABS Impact Samples: The Effect of Fiber Ratio, Infill Rate, and Infill Pattern on Warpage and Residual Stresses
Authors: Berkay Ergene , Çağın Bolat
Published: 2023 , Hittite Journal of Science and Engineering
DOI: 10.17350/HJSE19030000287
FAVORITE 0 TOTAL DOWNLOAD COUNT 610

0

610

Eriyik yığma modelleme ile üretilen PET-G parçaların katman yüksekliğine ve test sıcaklığına bağlı darbe davranışı
Authors: Berkay Ergene , Hasan Ispartalı, Uçan Karakılınç
Published: 2023 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.1065131
FAVORITE 0 TOTAL DOWNLOAD COUNT 851

0

851

AN EXPERIMENTAL INVESTIGATION ON THE EFFECT OF TEST SPEED ON THE TENSILE PROPERTIES OF THE PETG PRODUCED BY ADDITIVE MANUFACTURING
Authors: Berkay Ergene , Çağın Bolat
Published: 2022 , International Journal of 3D Printing Technologies and Digital Industry
DOI: 10.46519/ij3dptdi.1069544
FAVORITE 0 TOTAL DOWNLOAD COUNT 726

0

726

An investigation of the effect of tapered angle and boundary condition on natural frequency of different ceramic coated Ti-6Al-4V alloy with finite element analysis
Authors: Berkay Ergene , Çağın Bolat
Published: 2022 , Nigde Omer Halisdemir University Journal of Engineering Sciences
DOI: 10.28948/ngumuh.1078779
FAVORITE 0 TOTAL DOWNLOAD COUNT 237

0

237

Investigation on mechanical performances of various cellular structures produced by fused deposition modeling (FDM) method
Authors: Berkay Ergene , Bekir Yalçın
Published: 2022 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.945650
FAVORITE 0 TOTAL DOWNLOAD COUNT 1339

0

1339

INVESTIGATION OF THE EFFECT OF TAPER ANGLE AND BOUNDARY CONDITION ON NATURAL FREQUENCY OF THE 3D PRINTED PET-G BEAMS
Authors: Berkay Ergene , Gökmen Atlıhan , Ahmet Pınar
Published: 2022 , International Journal of 3D Printing Technologies and Digital Industry
DOI: 10.46519/ij3dptdi.1034127
FAVORITE 0 TOTAL DOWNLOAD COUNT 530

0

530

Simulation of the production of Inconel 718 and Ti6Al4V biomedical parts with different relative densities by selective laser melting (SLM) method
Authors: Berkay Ergene
Published: 2021 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.934143
FAVORITE 0 TOTAL DOWNLOAD COUNT 1295

0

1295

DETERMINING THE EFFECT OF CRACK DEPTH AND FIBER ANGLE ON VIBRATIONAL BEHAVIOR OF CARBON FIBER REINFORCED POLYMER COMPOSITE BEAM WITH FINITE ELEMENT ANALYSIS METHOD
Authors: Berkay Ergene
Published: 2021 , International Journal of 3D Printing Technologies and Digital Industry
DOI: 10.46519/ij3dptdi.931530
FAVORITE 0 TOTAL DOWNLOAD COUNT 571

0

571

An Experimental Study on Wear Performance of Electrolytic Multilayer Cu-Ni-Cr Coated ABS Under Different Test Forces
Authors: Sencer Karabeyoğlu , Berkay Ergene , Çağın Bolat
Published: 2021 , El-Cezeri
DOI: 10.31202/ecjse.862808
FAVORITE 0 TOTAL DOWNLOAD COUNT 461

0

461

INVESTIGATION OF 4D PRINTING TECHNOLOGY AND APPLICATION AREAS
Authors: Berkay Ergene , Bekir Yalçın
Published: 2020 , International Journal of Technological Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 627

0

627

Finite Element Analyzing of the Effect of Crack on Mechanical Behavior of Honeycomb and Re-entrant Structures
Authors: Berkay Ergene , Bekir Yalçın
Published: 2020 , Journal of Polytechnic
DOI: 10.2339/politeknik.534103
FAVORITE 0 TOTAL DOWNLOAD COUNT 1670

0

1670

Finite element analysis of various composite honeycomb cores under tensile loading
Authors: Berkay Ergene
Published: 2020 , Scientific Journal of Mehmet Akif Ersoy University
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 311

0

311

FAILURE ANALYSIS IN INJECTION GATE BRUSH MANUFACTURED FROM 1.2367 TOOL STEEL AND PREVENTATION OF FAILURE WİTH DESIGN IMPROVEMENT
Authors: Bekir Yalçın , Berkay Ergene , Serdar Nar
Published: 2019 , International Journal of Technological Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1078

0

1078

Investigation on the Suitability of Powder Particulars Used in Powder Bed/Feed Additive Manufacturing and Powder Manufacturing Methods
Authors: Uçan Karakılınç, Bekir Yalçın , Berkay Ergene
Published: 2019 , Journal of Polytechnic
DOI: 10.2339/politeknik.423707
FAVORITE 0 TOTAL DOWNLOAD COUNT 8849

0

8849

METALLURGY AND METHOD OF NEW TREND 3-D ADDITIVE MANUFACTURING IN INDUSTRY
Authors: Bekir Yalçın , Berkay Ergene
Published: 2017 , International Journal of Technological Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 8407

0

8407

Articles published in
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
El-Cezeri
El-Cezeri
Gazi Journal of Engineering Sciences
Gazi Journal of Engineering Sciences
Hittite Journal of Science and Engineering
Hittite Journal of Science and Engineering
International Journal of 3D Printing Technologies and Digital Industry
International Journal of 3D Printing Technologies and Digital Industry
International Journal of Engineering Technology and Applied Science
International Journal of Engineering Technology and Applied Science
International Journal of Technological Sciences
International Journal of Technological Sciences
Journal of Polytechnic
Journal of Polytechnic
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Nigde Omer Halisdemir University Journal of Engineering Sciences
Nigde Omer Halisdemir University Journal of Engineering Sciences
Scientific Journal of Mehmet Akif Ersoy University
Scientific Journal of Mehmet Akif Ersoy University

Reviews

Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
International Advanced Researches and Engineering Journal
International Advanced Researches and Engineering Journal
International Journal of 3D Printing Technologies and Digital Industry
International Journal of 3D Printing Technologies and Digital Industry
International Journal of Advances in Engineering and Pure Sciences
International Journal of Advances in Engineering and Pure Sciences
International Journal of Technological Sciences
International Journal of Technological Sciences
Journal of Advances in Manufacturing Engineering
Journal of Advances in Manufacturing Engineering
Journal of Engineering Sciences and Design
Journal of Engineering Sciences and Design
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Konya Journal of Engineering Sciences
Konya Journal of Engineering Sciences
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Uludağ University Journal of The Faculty of Engineering
Uludağ University Journal of The Faculty of Engineering

Publications

An Experimental Effort on Impact Properties of Polylactic Acid Samples Manufactured by Additive Manufacturing
Authors: Çağın Bolat , Berkay Ergene
Published: 2023 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.1075259
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 240

3

0

240

Simulation of Fused Deposition Modeling of Glass Fiber Reinforced ABS Impact Samples: The Effect of Fiber Ratio, Infill Rate, and Infill Pattern on Warpage and Residual Stresses
Authors: Berkay Ergene , Çağın Bolat
Published: 2023 , Hittite Journal of Science and Engineering
DOI: 10.17350/HJSE19030000287
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 610

2

0

610

Eriyik yığma modelleme ile üretilen PET-G parçaların katman yüksekliğine ve test sıcaklığına bağlı darbe davranışı
Authors: Berkay Ergene , Hasan Ispartalı, Uçan Karakılınç
Published: 2023 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.1065131
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 851

1

0

851

AN EXPERIMENTAL INVESTIGATION ON THE EFFECT OF TEST SPEED ON THE TENSILE PROPERTIES OF THE PETG PRODUCED BY ADDITIVE MANUFACTURING
Authors: Berkay Ergene , Çağın Bolat
Published: 2022 , International Journal of 3D Printing Technologies and Digital Industry
DOI: 10.46519/ij3dptdi.1069544
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 726

3

0

726

Investigation on mechanical performances of various cellular structures produced by fused deposition modeling (FDM) method
Authors: Berkay Ergene , Bekir Yalçın
Published: 2022 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.945650
CITED 11 FAVORITE 0 TOTAL DOWNLOAD COUNT 1339

11

0

1339

INVESTIGATION OF THE EFFECT OF TAPER ANGLE AND BOUNDARY CONDITION ON NATURAL FREQUENCY OF THE 3D PRINTED PET-G BEAMS
Authors: Berkay Ergene , Gökmen Atlıhan , Ahmet Pınar
Published: 2022 , International Journal of 3D Printing Technologies and Digital Industry
DOI: 10.46519/ij3dptdi.1034127
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 530

2

0

530

Simulation of the production of Inconel 718 and Ti6Al4V biomedical parts with different relative densities by selective laser melting (SLM) method
Authors: Berkay Ergene
Published: 2021 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.934143
CITED 13 FAVORITE 0 TOTAL DOWNLOAD COUNT 1295

13

0

1295

DETERMINING THE EFFECT OF CRACK DEPTH AND FIBER ANGLE ON VIBRATIONAL BEHAVIOR OF CARBON FIBER REINFORCED POLYMER COMPOSITE BEAM WITH FINITE ELEMENT ANALYSIS METHOD
Authors: Berkay Ergene
Published: 2021 , International Journal of 3D Printing Technologies and Digital Industry
DOI: 10.46519/ij3dptdi.931530
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 571

2

0

571

An Experimental Study on Wear Performance of Electrolytic Multilayer Cu-Ni-Cr Coated ABS Under Different Test Forces
Authors: Sencer Karabeyoğlu , Berkay Ergene , Çağın Bolat
Published: 2021 , El-Cezeri
DOI: 10.31202/ecjse.862808
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 461

2

0

461

Finite Element Analyzing of the Effect of Crack on Mechanical Behavior of Honeycomb and Re-entrant Structures
Authors: Berkay Ergene , Bekir Yalçın
Published: 2020 , Journal of Polytechnic
DOI: 10.2339/politeknik.534103
CITED 4 FAVORITE 0 TOTAL DOWNLOAD COUNT 1670

4

0

1670

Investigation on the Suitability of Powder Particulars Used in Powder Bed/Feed Additive Manufacturing and Powder Manufacturing Methods
Authors: Uçan Karakılınç, Bekir Yalçın , Berkay Ergene
Published: 2019 , Journal of Polytechnic
DOI: 10.2339/politeknik.423707
CITED 5 FAVORITE 0 TOTAL DOWNLOAD COUNT 8849

5

0

8849

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.