Muharrem Pul profile image
Muharrem Pul Prof. Dr. KIRIKKALE ÜNİVERSİTESİ, KIRIKKALE MESLEK YÜKSEKOKULU
Publication 29 Review 24 CrossRef Cited 54
29 Publication
24 Review
54 CrossRef Cited

Research Fields

Tribology Material Characterization Material Design and Behaviors Material Production Technologies Casting Technologies Powder Metallurgy Machine Design and Machine Equipment Nanotechnology Composite and Hybrid Materials Manufacturing Processes and Technologies (Excl. Textiles)

Institution

KIRIKKALE ÜNİVERSİTESİ, KIRIKKALE MESLEK YÜKSEKOKULU

Popular Publications

Karbon Nanotüp takviyeli ZA-27 Esaslı Kompozitlerde Karbon Nanotüp Takviye Oranının Mikroyapı Ve Bazı Mekanik Özelliklere Etkisi
Authors: Muharrem Pul
Published: 2020 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.642440
CITED 1 FAVORITE 2 TOTAL DOWNLOAD COUNT 1403

1

2

1403

Farklı Alüminyum Alaşımlarının Tornalanmasında Alaşım Cinsinin Kesici Takım Davranışı, Talaş Biçimi Ve Yüzey Pürüzlülüğüne Etkisi
Authors: Muharrem Pul , Osman Bican
Published: 2021 , Mühendislik Bilimleri ve Araştırmaları Dergisi
DOI: 10.46387/bjesr.787725
CITED 2 FAVORITE 1 TOTAL DOWNLOAD COUNT 1727

2

1

1727

Al 6061 alaşımının işlenmesinde kesme derinliği ve kesici takım geometrisinin yüzey pürüzlülüğüne ve takım aşınma davranışına etkisi
Authors: Muharrem Pul , Hacı Bekir Özerkan
Published: 2022 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gazimmfd.971380
CITED 5 FAVORITE 1 TOTAL DOWNLOAD COUNT 1160

5

1

1160

Publications

Effect of Heat Treatment at Different Temperatures on The Structural and Tribological Properties of Electroless Ni-B Coated 32CrMoV12-10 Alloy
Authors: Erdoğan Koray Özyurt, Muharrem Pul
Published: 2025 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1638437
FAVORITE 0 TOTAL DOWNLOAD COUNT 173

0

173

Investigation of the Structural and Mechanical Properties of Pure Al-TiC Composites
Authors: Muharrem Pul , Tuncay Şimşek , Murat Bilen
Published: 2025 , Gazi University Journal of Science Part A: Engineering and Innovation
DOI: 10.54287/gujsa.1565233
FAVORITE 0 TOTAL DOWNLOAD COUNT 233

0

233

Effect of Manufacturing Parameters on Abrasive Wear Behavior in Magnesia Reinforced 7075 Aluminum Alloy Matrix Composites
Authors: Muharrem Pul
Published: 2025 , Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
DOI: 10.21205/deufmd.2025277901
FAVORITE 0 TOTAL DOWNLOAD COUNT 429

0

429

Effect of Boron and ZrB2 Additives on Structural and Mechanical Properties of Elemental Boron and ZrB2 Doped Al2024 Composites
Authors: Tuncay Şimşek , Muharrem Pul , Murat Bilen
Published: 2024 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.1553148
FAVORITE 0 TOTAL DOWNLOAD COUNT 413

0

413

Investigation of machinability by electrical discharge machining method of ZA27/MWCNT composites produced by powder metallurgy
Authors: Hacı Bekir Özerkan , Mehmet Subaşı , Muharrem Pul
Published: 2024 , Sigma Journal of Engineering and Natural Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 200

0

200

Investigation of the Effect of Ulexite Additive on the Mechanical Strength and Thermal Conductivity of Cement Mortar
Authors: Ahmet Filazi , Muharrem Pul , Zühtü Onur Pehlivanlı , İbrahim Uzun
Published: 2024 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.1228699
FAVORITE 0 TOTAL DOWNLOAD COUNT 529

0

529

The Effect of SiC and MgO Ceramic Reinforcements on the Mechanical Behavior and Electrical Properties of the Composite Structure in Al7075/SiC/MgO Hybrid Composites
Authors: Mustafa Yasin Erten , Rustem Yilmazel , Ahmet Filazi , Muharrem Pul
Published: 2023 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.1321830
FAVORITE 0 TOTAL DOWNLOAD COUNT 817

0

817

Investigation of Electrical Conductivity in Cement Mortars with Waste Iron Chips
Authors: Ahmet Filazi , Rustem Yilmazel , Muharrem Pul
Published: 2023 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.1252097
FAVORITE 0 TOTAL DOWNLOAD COUNT 775

0

775

EFFECT OF GRAPHITE POWDER ADDITIVES ON MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY IN BLAST FURNACE SLAG-BASED ALKALI-ACTIVATED MORTARS
Authors: Ahmet Filazi , Rustem Yilmazel , Muharrem Pul
Published: 2023 , Journal of Engineering Sciences and Design
DOI: 10.21923/jesd.1248611
FAVORITE 0 TOTAL DOWNLOAD COUNT 1093

0

1093

Investigation of the Effect of Ambient Conditions on the Storage Life of Nitrocellulose Based Fuels
Authors: Mehmet Çağlayan , Muharrem Pul , Ayşegül Ülkü Metin
Published: 2023 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.1131709
FAVORITE 0 TOTAL DOWNLOAD COUNT 1058

0

1058

The Effect of MgO Particle Size and Cutting Tool Geometry on Machinability in Turning Al 2024/MgO Composite
Authors: Muharrem Pul
Published: 2023 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.1037886
FAVORITE 0 TOTAL DOWNLOAD COUNT 535

0

535

The effect of B4C and GNP reinforcement amounts on abrasive wear behavior in Al 6061/B4C/GNP hybrid composites
Authors: Muharrem Pul
Published: 2022 , Nigde Omer Halisdemir University Journal of Engineering Sciences
DOI: 10.28948/ngumuh.1142512
FAVORITE 0 TOTAL DOWNLOAD COUNT 782

0

782

Effect of Borax Pentahydrate Substitution on Soundproofing and Mechanical Properties of Cement Mortar
Authors: Ahmet Filazi , Muharrem Pul
Published: 2022 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.1074214
FAVORITE 0 TOTAL DOWNLOAD COUNT 821

0

821

Investigation of Tool Wear Behaviors in The Machining of Al 6061/B4C/GNP Hybrid Composite
Authors: Selçuk Yağmur , Muharrem Pul
Published: 2022 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.1096103
FAVORITE 0 TOTAL DOWNLOAD COUNT 827

0

827

Al 6061 alaşımının işlenmesinde kesme derinliği ve kesici takım geometrisinin yüzey pürüzlülüğüne ve takım aşınma davranışına etkisi
Authors: Muharrem Pul , Hacı Bekir Özerkan
Published: 2022 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gazimmfd.971380
FAVORITE 1 TOTAL DOWNLOAD COUNT 1160

1

1160

Vortex Yöntemiyle Üretilen FeB takviyeli AA1050 Kompozitlerde FeB Miktarının Mekanik Özelliklere Etkisi
Authors: Muharrem Pul , Sadettin Şahin
Published: 2021 , Mühendislik Bilimleri ve Araştırmaları Dergisi
DOI: 10.46387/bjesr.917088
FAVORITE 0 TOTAL DOWNLOAD COUNT 772

0

772

The Effect of Discharge Current and Reinforcement Ratio on the Microstructure and Roughness of the Machined Surface in the Machining of AA7075 Matrix B4C+SiC Reinforced Hybrid Composites by Powder Reinforced EDM Method
Authors: Gözde Keskin , Gökan Küçüktürk , Muharrem Pul , Hakan Gürün , Volkan Baydaroğlu
Published: 2021 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.885976
FAVORITE 0 TOTAL DOWNLOAD COUNT 734

0

734

Farklı Alüminyum Alaşımlarının Tornalanmasında Alaşım Cinsinin Kesici Takım Davranışı, Talaş Biçimi Ve Yüzey Pürüzlülüğüne Etkisi
Authors: Muharrem Pul , Osman Bican
Published: 2021 , Mühendislik Bilimleri ve Araştırmaları Dergisi
DOI: 10.46387/bjesr.787725
FAVORITE 1 TOTAL DOWNLOAD COUNT 1727

1

1727

Investigation of the Effect of Pre-Hole Application on Machinability in Drilling of Ti-6Al-4V Titanium Alloy
Authors: Selçuk Yağmur , Muharrem Pul
Published: 2021 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.771235
FAVORITE 0 TOTAL DOWNLOAD COUNT 1707

0

1707

Zirkonya Katkılı AZ91 Magnezyum Alaşımının Mekanik Davranışlarının İncelenmesi
Authors: Muharrem Pul
Published: 2020 , Mühendislik Bilimleri ve Araştırmaları Dergisi
DOI: 10.46387/bjesr.688022
FAVORITE 0 TOTAL DOWNLOAD COUNT 1132

0

1132

INVESTIGATION OF ABRASIVE WEAR BEHAVIOR OF AA 1050 BASED GNP + TiB2 REINFORCED HYBRID COMPOSITES PRODUCED FOR VACUUM INFILTRATION
Authors: Muharrem Pul
Published: 2020 , Nigde Omer Halisdemir University Journal of Engineering Sciences
DOI: 10.28948/ngumuh.669072
FAVORITE 0 TOTAL DOWNLOAD COUNT 991

0

991

Investigation of Mechanical Properties of B4C / SiC Additive Aluminum Based Composites and Modeling of Their Ballistic Performances
Authors: Muharrem Pul , Volkan Baydaroğlu
Published: 2020 , Journal of Polytechnic
DOI: 10.2339/politeknik.525011
FAVORITE 0 TOTAL DOWNLOAD COUNT 3100

0

3100

Karbon Nanotüp takviyeli ZA-27 Esaslı Kompozitlerde Karbon Nanotüp Takviye Oranının Mikroyapı Ve Bazı Mekanik Özelliklere Etkisi
Authors: Muharrem Pul
Published: 2020 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.642440
FAVORITE 2 TOTAL DOWNLOAD COUNT 1403

2

1403

AI 1070/TiB2 Kompozitlerin Tornalanmasında TiB2 Takviye Miktarının Esas Kesme Kuvveti Ve Yüzey Pürüzlülüğüne Etkisi
Authors: Muharrem Pul
Published: 2020 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.543968
FAVORITE 0 TOTAL DOWNLOAD COUNT 1172

0

1172

Comparison of Mechanical Behavior of MgO Reinforced Aluminum Composites Produced by Different Methods
Authors: Muharrem Pul
Published: 2019 , Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
DOI: 10.21605/cukurovaummfd.609428
FAVORITE 0 TOTAL DOWNLOAD COUNT 1404

0

1404

The Effect on Mechanical Properties of Reinforcement Amount at B4C + TiB2 Reinforced Al 2024 Based Composites Produced by Powder Metallurgy
Authors: Muharrem Pul
Published: 2019 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.407488
FAVORITE 0 TOTAL DOWNLOAD COUNT 2822

0

2822

Investigation Of Abrasion And Machining Properties Of Carbon Nanotube (CNT) And Nano Grafen (G) Reinforced AI 2024 Composites By Vortex Method
Authors: Muharrem Pul
Published: 2019 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.493868
FAVORITE 0 TOTAL DOWNLOAD COUNT 5539

0

5539

Comparison of The Effects on The Mechanical Properties of SiC, B4C and TiB2 Reinforcing Elements in Aluminum 7075 Matrix Composites
Authors: Muharrem Pul
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.431573
FAVORITE 0 TOTAL DOWNLOAD COUNT 2146

0

2146

Comparison of Surface Roughness and Tool Wear in Turning of 7075, 6061 and 2024 Aluminum Alloys
Authors: Muharrem Pul
Published: 2017 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.351746
FAVORITE 0 TOTAL DOWNLOAD COUNT 15102

0

15102

Articles published in
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
Gazi University Journal of Science Part A: Engineering and Innovation
Gazi University Journal of Science Part A: Engineering and Innovation
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
Journal of Engineering Sciences and Design
Journal of Engineering Sciences and Design
Journal of Polytechnic
Journal of Polytechnic
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications
Mühendislik Bilimleri ve Araştırmaları Dergisi
Mühendislik Bilimleri ve Araştırmaları Dergisi
Nigde Omer Halisdemir University Journal of Engineering Sciences
Nigde Omer Halisdemir University Journal of Engineering Sciences
Sakarya University Journal of Science
Sakarya University Journal of Science
Sigma Journal of Engineering and Natural Sciences
Sigma Journal of Engineering and Natural Sciences

Reviews

Academic Platform - Journal of Engineering and Science
Academic Platform - Journal of Engineering and Science
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Aksaray University Journal of Science and Engineering
Aksaray University Journal of Science and Engineering
Bilecik Seyh Edebali University Journal of Science
Bilecik Seyh Edebali University Journal of Science
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
Gümüşhane University Journal of Science and Technology
Gümüşhane University Journal of Science and Technology
Hittite Journal of Science and Engineering
Hittite Journal of Science and Engineering
International Journal of 3D Printing Technologies and Digital Industry
International Journal of 3D Printing Technologies and Digital Industry
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Karaelmas Science and Engineering Journal
Karaelmas Science and Engineering Journal
Mühendis ve Makina
Mühendis ve Makina
Mühendislik Bilimleri ve Araştırmaları Dergisi
Mühendislik Bilimleri ve Araştırmaları Dergisi
The International Journal of Materials and Engineering Technology
The International Journal of Materials and Engineering Technology
Yuzuncu Yil University Journal of the Institute of Natural and Applied Sciences
Yuzuncu Yil University Journal of the Institute of Natural and Applied Sciences

Publications

Effect of Heat Treatment at Different Temperatures on The Structural and Tribological Properties of Electroless Ni-B Coated 32CrMoV12-10 Alloy
Authors: Erdoğan Koray Özyurt, Muharrem Pul
Published: 2025 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1638437
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 173

1

0

173

Effect of Manufacturing Parameters on Abrasive Wear Behavior in Magnesia Reinforced 7075 Aluminum Alloy Matrix Composites
Authors: Muharrem Pul
Published: 2025 , Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
DOI: 10.21205/deufmd.2025277901
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 429

1

0

429

EFFECT OF GRAPHITE POWDER ADDITIVES ON MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY IN BLAST FURNACE SLAG-BASED ALKALI-ACTIVATED MORTARS
Authors: Ahmet Filazi , Rustem Yilmazel , Muharrem Pul
Published: 2023 , Journal of Engineering Sciences and Design
DOI: 10.21923/jesd.1248611
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 1093

3

0

1093

The Effect of MgO Particle Size and Cutting Tool Geometry on Machinability in Turning Al 2024/MgO Composite
Authors: Muharrem Pul
Published: 2023 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.1037886
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 535

1

0

535

Investigation of Tool Wear Behaviors in The Machining of Al 6061/B4C/GNP Hybrid Composite
Authors: Selçuk Yağmur , Muharrem Pul
Published: 2022 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.1096103
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 827

2

0

827

Al 6061 alaşımının işlenmesinde kesme derinliği ve kesici takım geometrisinin yüzey pürüzlülüğüne ve takım aşınma davranışına etkisi
Authors: Muharrem Pul , Hacı Bekir Özerkan
Published: 2022 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gazimmfd.971380
CITED 5 FAVORITE 1 TOTAL DOWNLOAD COUNT 1160

5

1

1160

The Effect of Discharge Current and Reinforcement Ratio on the Microstructure and Roughness of the Machined Surface in the Machining of AA7075 Matrix B4C+SiC Reinforced Hybrid Composites by Powder Reinforced EDM Method
Authors: Gözde Keskin , Gökan Küçüktürk , Muharrem Pul , Hakan Gürün , Volkan Baydaroğlu
Published: 2021 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.885976
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 734

2

0

734

Farklı Alüminyum Alaşımlarının Tornalanmasında Alaşım Cinsinin Kesici Takım Davranışı, Talaş Biçimi Ve Yüzey Pürüzlülüğüne Etkisi
Authors: Muharrem Pul , Osman Bican
Published: 2021 , Mühendislik Bilimleri ve Araştırmaları Dergisi
DOI: 10.46387/bjesr.787725
CITED 2 FAVORITE 1 TOTAL DOWNLOAD COUNT 1727

2

1

1727

Investigation of the Effect of Pre-Hole Application on Machinability in Drilling of Ti-6Al-4V Titanium Alloy
Authors: Selçuk Yağmur , Muharrem Pul
Published: 2021 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.771235
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1707

2

0

1707

Zirkonya Katkılı AZ91 Magnezyum Alaşımının Mekanik Davranışlarının İncelenmesi
Authors: Muharrem Pul
Published: 2020 , Mühendislik Bilimleri ve Araştırmaları Dergisi
DOI: 10.46387/bjesr.688022
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1132

1

0

1132

INVESTIGATION OF ABRASIVE WEAR BEHAVIOR OF AA 1050 BASED GNP + TiB2 REINFORCED HYBRID COMPOSITES PRODUCED FOR VACUUM INFILTRATION
Authors: Muharrem Pul
Published: 2020 , Nigde Omer Halisdemir University Journal of Engineering Sciences
DOI: 10.28948/ngumuh.669072
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 991

1

0

991

Investigation of Mechanical Properties of B4C / SiC Additive Aluminum Based Composites and Modeling of Their Ballistic Performances
Authors: Muharrem Pul , Volkan Baydaroğlu
Published: 2020 , Journal of Polytechnic
DOI: 10.2339/politeknik.525011
CITED 9 FAVORITE 0 TOTAL DOWNLOAD COUNT 3100

9

0

3100

Karbon Nanotüp takviyeli ZA-27 Esaslı Kompozitlerde Karbon Nanotüp Takviye Oranının Mikroyapı Ve Bazı Mekanik Özelliklere Etkisi
Authors: Muharrem Pul
Published: 2020 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.642440
CITED 1 FAVORITE 2 TOTAL DOWNLOAD COUNT 1403

1

2

1403

AI 1070/TiB2 Kompozitlerin Tornalanmasında TiB2 Takviye Miktarının Esas Kesme Kuvveti Ve Yüzey Pürüzlülüğüne Etkisi
Authors: Muharrem Pul
Published: 2020 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.543968
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1172

1

0

1172

The Effect on Mechanical Properties of Reinforcement Amount at B4C + TiB2 Reinforced Al 2024 Based Composites Produced by Powder Metallurgy
Authors: Muharrem Pul
Published: 2019 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.407488
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 2822

3

0

2822

Investigation Of Abrasion And Machining Properties Of Carbon Nanotube (CNT) And Nano Grafen (G) Reinforced AI 2024 Composites By Vortex Method
Authors: Muharrem Pul
Published: 2019 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.493868
CITED 5 FAVORITE 0 TOTAL DOWNLOAD COUNT 5539

5

0

5539

Comparison of The Effects on The Mechanical Properties of SiC, B4C and TiB2 Reinforcing Elements in Aluminum 7075 Matrix Composites
Authors: Muharrem Pul
Published: 2019 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.431573
CITED 8 FAVORITE 0 TOTAL DOWNLOAD COUNT 2146

8

0

2146

Comparison of Surface Roughness and Tool Wear in Turning of 7075, 6061 and 2024 Aluminum Alloys
Authors: Muharrem Pul
Published: 2017 , International Journal of Engineering Research and Development
DOI: 10.29137/umagd.351746
CITED 6 FAVORITE 0 TOTAL DOWNLOAD COUNT 15102

6

0

15102

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.